REP Series Environmentally-Sealed Rectangular Plastic Connectors

Disclaimer All of the information included in this catalogue is believed to be accurate at the time of printing. It is recommended, however, that users should independently evaluate the suitability of each product for their intended application and be sure that each product is properly installed, used and maintained to achieve desired results. Smiths Interconnect makes no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Smiths Interconnect reserves the right to modify design and specifications, in order to improve quality, keep pace...

Environmentally - Sealed Rectangular Plastic Connectors Optimised for use in rail and embedded applications Smiths Interconnectors’ REP Series of multi-pole, sealed, and plastic connectors, provides a quick and secure connection of embedded equipment across a wide range of applications, such as sensors, brakes, lighting, air conditioning and communications found within industrial, rail, test and measurement, automotive, public works and defence. The REP Series is available with the proven Hypertac® hyperboloid contact technology which ensures excellent reliability under shock and vibration, and...

Available Contact Technologies Features and Benefits Hypertac® Hyperboloid - Original HC ■ Long contact life Industry-leading mating cycles (up to 20,000) provide low cost of ownership Superior signal integrity No discontinuity when measured down to 2ns Low insertion/extraction forces Ergonomic mating without cost and size of mate assist hardware Lower contact resistance Low power consumption / lower voltage drop across connector Higher current ratings Smaller contacts needed to carry power for reduced size and weight Immunity to shock and vibration Reliability under harsh environmental conditions...

smiths interconnect REP Series Technical Characteristics STANDARDS Contact Arrangements Contact Diameter Weight (contacts included) Coding Configurations Polarisation REP102 with contacts: 7.74g REP202 with contacts: 8.18g REP402 with bent contacts: 9g REP402 with straight contacts: 8g REP506 with contacts: 17.9g REP606 with contacts: 19.3g REP406 with bent contacts: 15.5g REP406 with straight contacts: 13.5g REP512 with contacts: 32.8g REP612 with contacts: 33.9g REP412 with bent contacts: 25g REP412 with straight contacts: 22g Cable-to-cable, clip locking, panel mount 180° Contact Retention...

Dimensions 2,6,12-Way Connectors 2 Way Plugs & Receptacles Cable Harness, Crimp Termination Female plug Male receptacle Coding devices Grommet rear Coding devices Interfacial seal 2 Way Receptacles PCB /Panel Mount, Straight & Bent Termination Straight male receptacle Bent male receptacle Dimensions are in mm | All specifications are subject to change without notice 6

6 Way Plugs & Receptacles Female plug Male receptacle 6 Way Receptacles PCB /Panel Mount, Straight & Bent Termination Straight male receptacle Bent male receptacle Dimensions are in mm | All specifications are subject to change without notice 7

12 Way Plugs & Receptacles Cable Harness, Crimp Termination Female plug Male receptacle 12 Way Receptacles PCB /Panel Mount, Straight & Bent Termination Straight male receptacle Bent male receptacle Dimensions are in mm | All specifications are subject to change without notice 8

smiths interconnect Assembly Contacts & AccessoriesContact & Shunt Assembly Contact insertion Shunt installation Installation complete Accessories CONNECTOR Dimensions are in mm | All specifications are subject to change without notice

smiths interconnect REP 1 Series Series [fixed] 2 Layout Plug - 2 socket contacts Receptacle for pcb or panel mount - 2 pin contacts Receptacle for pcb or panel mount - 6 pin contacts Receptacle for pcb or panel mount - 12 pin contacts Plug - 6 socket contacts Receptacle - 6 pin contacts Plug - 12 socket contacts Receptacle - 12 pin contacts 3 Part - Polarity 03 Plug without contact In 1 21 Female plug with Hyperboloid contacts’ 1 M iFemale plug with MR contacts** Receptacle without contact Male receptacle with contacts Male receptacle with tinned contacts Male receptacle with RoHS tinned 4 Termination...

You may also be interested in Compact Signal and Ethernet PCB Connectors ■ Compact, high-speed, and reliable solution for PCB to PCB and floating mouting rack and panel applications ■ Hyperboloid contact technologyfor signal and high speed quadrax 100 Ohm contacts ■ Compliance with the main European Railway standards (EN45545-2, NF F61030, EN50155:2017, STM-S-001ind.D & more), with MIL-C-28748 and MIL-STD-202-301 standards and EIA/IEC standards for contact resistance and environmental testing Modular and Mini-Modular Connectors ■ Mixed signal, power, coaxial, fiber optic and pneumatic modules...

Worldwide Support Connectors Semiconductor Test Technical Support Technical Support Technical Support Technical Support Technical Support Technical Support Fibre Optics & RF Components RF/MW Subsystems Americas, Europe & Asia Technical Support Technical Support [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] Europe Sales...