smiths connectors

technIcal characterIstIcs specIfIcatIons corrosion: MIL-STD-202 Method 101, Test Condition B shock: MIL-STD-202 Method 213, Test Condition B or leaded nickel copper, alloy UNS C19500, C19600 Vibration: MIL-STD-202 Method 204, Test Condition B Gold plate per MIL-DTL-45204 Type II, Class 1 thermal shock: MIL-STD-202 Method 107, Test Condition B durability: 500 Mate/Unmate cycles/min. connector plug/ dielectric withstand Voltage: 250 VDC receptacle shells Electroless nickel plate per SAE AMS-C-26074 or shells & Inner contacts: Insulation resistance: 5.000 MegaOhms min contact current rating: 3.0...

smiths connectors HYPERTAC loorawNEcr SABRTTEC

In-Line Quadsplitter Smiths Connectors is now able to offer the best of both worlds with our In-Line Quadsplitter which offers another solution for extending the distance that High Speed signals can be sent over a Quadrax architecture. We can combine the signal integrity of Twinax cables and the connection density of Quadrax contacts by incorporating two 26 AWG Twinax cables into a standard Size 8 Quadrax contact. The resulting cable assembly is about the same size and weight as a 24 AWG Quadrax cable assembly and offers the same flexibility and ease of use. The In-Line Quadsplitter can be used...

Quadsplitter Currently high-speed data transference requires transmission systems that minimize reflections. This is achieved through controlled characteristic impedance from source to load. In microwave systems, this is accomplished with waveguide or coaxial transmission lines. In both cases, the line geometry is the determining factor along with dielectric and conductor materials. Steps, bends, protrusions etc. will invariably cause reflections with consequent loss of transmission efficiency. In 2-wire differential- mode transmissions this is acceptable at lower data rates, however, when data...

Quadsplitter ze 11 Quad Receptacle to 2 Socket Insert Right Angle Twinax Si Cables to Open Lead MASTER KEYWAY QUAD INSERT Part Number Cable Type Please specify cable length when ordering Differential Twinax ze 25 Four Way Quad Pin Insert Receptacle to 8 Right Angle Twinax Si Cables to Open Lead 4X #6-32 HELI-COIL 8 TWINAXIAL CABLES Part Number Please specify cable length when ordering Cable Type Differential Twinax

Cable Assembly Ordering 1 connector #1 2 cable group # Flexible Twinax Differential Twinax Differential Quadrax 3 connector #2 4 cable length in inches (XXX) OL for Open Lead Flexible Twinax Cables Cable Group Cable Designation Impedance (Ohms) Differential Pair Twinax Cables 6 Differential Quadrax Cables 9

SMITHS CONNECTORS GLOBAL SUPPORT AMERICAS Hudson, MA Irvine, CA Kansas City, KS France Germany Italy United Kingdom Bangalore, India Shanghai, China Singapore Suzhou, China [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] Copyright 2014 Smiths Connectors | All rights reserved