smiths connectors FILTER RACK HYPERTAC """"""EilS,, SABRITEC

arinc 404 Smith Connectors’ ARINC 404 filter connectors are designed to meet or exceed all applicable requirements of the military specification. These connectors are intermateable and interchangeable with the standard non-filtered connectors. MATERIALS AND FINISHES Shell Aluminum alloy/Steel/Composite High grade plastic/epoxy Copper alloy, gold plate Grommet & Seal Silicon base elastomer Ground Plane Beryllium copper, silver plate Barium Titanate Ferrite bead insert arrangements Smith Connectors provides specialty, enhanced performance connectors and cable assemblies and as such does not currently...

Arinc 404 hell Size 1 S hell Size 4 S 1.450 MAX Pi Filter 1.380 MAX C Filter

2 Prefix 3 SHELL SIZE C CADMIUM (YELLOW CHROMATE) 5 INSERT ARRANGEMENT CAVITY

arinc 600 ARINC 600 filter connectors are designed to meet or exceed all applicable requirements of the specification. These connectors are intermateable and interchangeable with the standard non-filtered connectors. MATERIALS AND FINISHES Shell Aluminum alloy High grade plastic/epoxy Copper alloy, gold plate Grommet & Seal Silicon base elastomer Ground Plane Brass, Silver Plate Barium Titanate Ferrite bead insert arrangements Smith Connectors provides specialty, enhanced performance connectors and cable assemblies and as such does not currently offer circular, rack and panel, or D-subminiature...

Arinc 600 hell Size 1 S

2 PREFIX 3 shell size C CADMIUM (YELLOW CHROMATE) 5 INSERT ARRANGEMENTS CAVITY 7 CONTACT TERMINATION SOLDER CUP S

Mil-Dtl-83527 MIL-DTL-83527 connectors are designed to meet or exceed all applicable requirements of the military specification. These connectors come standard with anti-rotational keyed insert assemblies for filter, high-speed fibre channel or Ethernet twinax and quadrax contacts. Offered in a number of different contact arrangements and shell sizes, these connectors are intermateable and interchangeable with the standard non-filtered MIL-DTL-83527 connectors. insert arrangements For Size 8 Contacts Please Specify: T = Twinax/Quadrax Cavity (Anti-Rotational) C = Coaxial/Triaxial Cavity I-0 BLANK...

MIL-DTL-83527 hell Size 2 Receptacle S 2X Ø.155 BOSS (FRONT & REAR) 2X Ø.186 BOSS (FRONT & REAR) (2.085) hell Size 3 Receptacle S 2X (Ø.155) BOSS (FRONT & BACK) 2X (Ø.186) BOSS (FRONT & BACK) (3.706) hell Size 4 Receptacle S 4X (.100) (FRONT & REAR) 2X (Ø.186) BOSS (FRONT & REAR) (5.000)

2 PREFIX 3 shell size C CADMIUM (YELLOW CHROMATE) 5 INSERT ARRANGEMENTS CAVITY 7 CONTACT TERMINATION SOLDER CUP S

electrical PerforMance electrical characteristics - 'Pi' section FILTER DESCRIPTION Operating Temperature Range Voltage Rating 15 amps size 16/7.5 amps size 20/5 amps size 22 Insulation Resistance DWV Sea Level w/ 50 micro-amps max. charge/discharge Ferrite Bead insertion loss table FILTER DESCRIPTION Minimum No Attenuation loss @ 25° Notes: 1. P200 & P100 Capacitance Values for Size 20 Contact Arrangement & Larger 2. No Load Minimum Attenuation Values per MIL-STD-220 3. Capacitance in Nanofarads (Nominal Value) 4. Consult Factory for Higher Voltages & Capacitance Values

electrical PerforMance electrical characteristics - 'l' section FILTER DESCRIPTION Operating Temperature Range Voltage Rating 15 amps size 16/7.5 amps size 20/5 amps size 22 Insulation Resistance DWV Sea Level w/ 50 micro-amps max. charge/discharge insertion loss table FILTER DESCRIPTION Minimum No Attenuation loss @ 25° Notes: 1. L200, L100 & L76 Capacitance Values for Size 20 Contact Arrangement & Larger 2. No Load Minimum Attenuation Values per MIL-STD-220 3. Capacitance in Nanofarads (Nominal Value) 4. Consult Factory for Higher Voltages & Capacitance Values

electrical PerforMance electrical characteristics - 'c' section FILTER DESCRIPTION Operating Temperature Range Voltage Rating 15 amps size 16/7.5 amps size 20/5 amps size 22 Insulation Resistance DWV Sea Level w/ 50 micro-amps max. charge/discharge insertion loss table FILTER DESCRIPTION Minimum No Attenuation loss @ 25° Notes: 1. C200, C100 & C76 Capacitance Values for Size 20 Contact Arrangement & Larger 2. No Load Minimum Attenuation Values per MIL-STD-220 3. Capacitance in Nanofarads (Nominal Value) 4. Consult Factory for Higher Voltages & Capacitance Values

PerforMance Data Smith Connectors connectors conform to the applicable military specifications and standards for materials, finishes and mechanical form, fit, and function. Filter connectors are fully intermateable and interchangeable in most instances with standard non-filtered QPL MIL-SPEC connectors. MATERIALS AND FINISHES Shell & Jam Nut Aluminum Alloy Electroless Nickel per MIL-C-26074 Brass per ASTM B16 Gold Plate per MIL-G-45204 Socket & Contacts Copper Alloy Gold Plate per MIL-G-45204 High Grade Plastic/Epoxy Seal & Grommet Silicon Base Elastomer PRODUCTION AUTOMATION TEST SYSTEM MEASUREMENTS...

contact terMination PC TAIL COMPLIANT PRESS-FIT (SOLDERLESS) DIMENSIONS Contact Size Consult factory for alternate size Crimp / Removable* Integrated Grommet Standard MIL-SPEC Crimp Removable Socket Contact * Add 0.700" to overall length for crimp removable connector with integrated grommet. 16

SMITHS CONNECTORS GLOBAL SUPPORT AMERICAS United Kingdom visit us at | smithsconnectors.com | Copyright© 2016 Smiths Connectors | All rights reserved | Version 1.1