• Hand-held, rugged detector designed for extreme conditions.
• Capable of detecting explosives, narcotics, and chemical warfare agents/toxic industrial chemicals (CWA/TIC) in one device.
• Simultaneous dual-mode detection for explosives and narcotics from a single sample.
• Enhanced detection range, optimized for peroxides and taggants.
• User-friendly interface based on Windows® CE platform.
• Remote operation capability with alarm and status reporting via Ethernet, WiFi, or RF.
• Unlimited data storage using SD memory card.
• Operates up to 5 hours with hot-swappable battery.
• Integrated USB and WiFi/Ethernet connectivity.

• Technology: Ion Mobility Spectrometry (IMS).
• Radiation Source: 63Ni, sealed 15 mCi.
• Sample Collection: Trace Particle and Vapor.
• Operating Modes: Simultaneous Explosives/Narcotics, Explosives only, Narcotics only, CWA/TIC.
• Explosives Detected: RDX, PETN, TNT, TATP, NG, H202, EGDN, and others.
• Narcotics Detected: Cocaine, Heroin, Methamphetamine, THC, and others.
• CWAs Detected: Nerve and blister agents like Tabun, Sarin, Soman, Cyclosarin, Agent VX, and VX.
• TICs Detected: Hydrogen Cyanide, Phosgene, S02, NH3, and others.
• Sensitivity: Particle detection in low nanogram range; vapor detection in low parts per million range.
• False Alarm Rate: Less than 1%.
• Programmable Channels: Over 40.
• Input Voltage: 12VDC, 90-264VAC, 47-63Hz; auto-sensing/switching; 2.5-hour battery.
• Power Requirements: Max 120W.
• Warm-up Time: Less than 10 minutes.
• Analysis Time: Less than 10 seconds.
• Alarm Type: Audio and visual, with substance identification.
• Display: 3.5” Color TFT LCD.
• Data Storage: Unlimited, based on SD card capacity.
• Dimensions: 19” x 8.5” x 8” (48.3 x 21.6 x 20.3 cm).
• Weight: 11 lbs. (5 kg), including 2.5-hour hot swap battery.
• Operating Temperature Range: 20ºF to 130ºF (-7ºC to +54ºC), less than 95% relative humidity, non-condensing.
• Hardened Specifications: 3’ drop to concrete, operable in sand, rain, wind conditions (IP54 operating, IP53 vapor sampling).

The MMTD can operate remotely and unattended, with alarm and status information reported via Ethernet, WiFi, or RF.

The software offers an intuitive interface with easy-to-navigate menus, allowing advanced operators to review and analyze results via network.

Data storage is unlimited, based on SD card capacity, with results exportable via USB, SD, or Ethernet ports.