Technical Information smiths detection bringing technology to life Feature Highlights • Inspect loaded trucks, containers and vehicles at ports, airports and border crossings • High throughput of up to 23 trucks per hour • Steel Penetration up to 280mm (11in) @ 4MeV • Small footprint and security perimeter • Requires minimal system operators The HCVG series of X-ray screening systems is designed to optimize security checks at ports, airports and border crossings. These systems are used to inspect whole trucks (cabin included), containers, and vehicles for threats such as explosives, narcotics, weapons of mass destruction (WMDs) contraband, as well as manifest verification, reducing the need for manual inspection. The HCVG uses a 4MeV accelerator, providing up to 280mm (11in) of steel penetration and a high throughput of up to 23 trucks per hour. The system's high performance imaging capability provides the operator with detailed radioscopic images of container or vehicle and its contents, allowing for rapid and reliable results. out both the X-ray inspection and an analysis to detect the presence of radioactive gamma and/or neutron materials within the container or vehicle. The modular design of the HCVG provides the ability for the system to be relocated, adapting to the customer's specific needs. The HCVG is a standalone unit which requires limited external infrastructure. The system is designed for ease of operation with a minimal footprint, while still integrating the most demanding international security screening requirements. The HCVG systems have proven to be an indispensable tool for Customs agencies and law enforcement authorities worldwide. When equipped with the automatic radioactive material detection - ARD (optional), the HCVG simultaneously carries

General specifications _ Scanning principle The gantry X-ray system moves while the container or vehicle remains stationary System specifications - Motorization Weight Scanning speed Footprint [W x L x H] Scanning height Maximum height below gantry Installation time Inspection throughput Minimum crew requirement Operating temperature Relative humidity Electrical consumption Max. dimensions [H x W x L] Electric motor piloted by frequency controller 27 tons (26.57 tons UK/29.76 tons/US) 24m/min (80fpm) 11m x 31m x 6.5m (36' x 101.7' x 21.3') From 0.48m to 4.7m (1.6' to 15.4') - no corner cut-off...