Compact Direct Operated 2/3 Port Solenoid Valve For Water and Air Grommet Faston™ terminal Compact / Lightweight Single valve volume: Reduced by -75% (VDW20) (for an orifice size equivalent to 0 2mm)

Compact Direct Operated 2/3 Port Solenoid Valve For Water and Air • Compact (compared to the VX series) Single valve volume: Reduced by -75% (VDW20) Manifold length: Reduced by -18% (VDW30, 7 stations) • Lightweight (compared to the VX series) (for an orifice size equivalent to 0 2mm) Improved durability (Nearly twice the life of the previous series) Clip type material reduces the operating resistance of moving parts, while improving service life, wear and corrosion resistance. Improved corrosion resistance Special material introduced. High flow rate: Cv factor Universal porting Improved environment...

Compact Direct Operated 2 Port Solenoid Valve For Water and Air How to Order Valves (Single unit) Valve type • Please consult with SMC regarding other voltages. G - Grommet / Tape winding Magnet wire protection: Tape winding F - Fasten™ terminal / Molded Magnet wire protection: Molded Electrical entry* Magnet wire protection: Molded Series and Coil Type Combinations Note) The foot bracket Is J) packed with avalve. Material and insulation type . Note) For delonlzed water: the armature J) assembly Is a corrosion resistant Thread type • Port size Orifice size

Series VDW10/20/30 Standard Specifications Valve specifications Valve construction Direct operated poppet Fluid Note 2) Water (except waste water or agricultural water), Air, Low vacuum Withstand pressure (MPa) 2.0 Ambient temperature (°C) –10 to 50 Fluid temperature (°C) 1 to 50 (No freezing) Environment Location without corrosive or explosive gases Valve leakage (cm3/min) 0 (with water pressure) / 1 (Air) Mounting orientation Unrestricted Coil specifications Vibration/Impact (m/s2) Note 4) 30/150 24 VDC, 12 VDC, 6 VDC, 5 VDC, 3 VDC, 100 VAC, 110 VAC, 200 VAC, 220 VAC (50/60 Hz) Rated voltage...

Compact Direct Operated 2 Port Solenoid Valve For Water and Air Component Parts

Series VDW10/20/30 How to Order Manifold VV2DW 2 Q 05 01 Series 1 2 3 How to Order Manifold Assembly Enter the mounting valve and option part numbers under the manifold base part number. VV2DW2-0501 ········ 1 set Manifold part no. Option 10 20 30 None With bracket - F ∗VDW23-5G-2 ········· 5 sets Valve part no. (Stations 1 to 5) Note) Series 30 is available with bracket only. Material Symbol Manifold material Seal material NBR Brass (C37) FKM A EPDM B NBR G Stainless FKM H steel EPDM J “∗” is the symbol for assembly. Add an “∗” in front of the part numbers to have solenoid valves, etc. mounted...

Series VDW10/20/30 Manifold Exploded View Bracket assembly Manifold base for 2 stations Passage pipe assembly Manifold base for 3 stations Bracket assembly Connecting plate assembly Connecting plate assembly ∗ Figure shows VV2DW2. Manifold additions Install a passage pipe assembly in between the manifold bases to be added. Connect the respective manifold bases with a connecting plate assembly. (Tightening torque: 0.9 ± 0.1 N·m) Attach brackets to the manifold bases. {when equipped with brackets} (Tightening torque: 0.9 ± 0.1 N·m) Note) The manifold can be increased in 2 or 3-station units. A...

Compact Direct Operated 2 Port Solenoid Valve For Water and Air Series VDW10/20/30 • Series 10, 20 • Series 10, 20 VVDW 2 0 2 C 1 VVDW 2 0 01 Series 1 2 4A Series 1 2 Note) Consists of two sets of connecting plate and mounting screws. 10 20 Thread type C S F N Brass (C37) Stainless steel OUT port size Stations 1 2 Rc G NPT - Material Symbol For 2 stations For 3 stations M5 01 Port size M5 1/8 (6A) 10 20 • Series 30 VVCW20-4A ∗ Series 10 is available with M5 only. • Series 30 VVCW20 2 C 1 01 Material C S VVDW 2 0 Thread type Brass (C37) Stainless steel - F N Stations 1 2 • Series 10, 20 For 2...

Compact Direct Operated 3 Port Solenoid Valve For Water and Air How to Order Valves (Single unit) Valve type ■ Please consult with SMC regarding other voltages. G - Grommet / Tape winding Magnet wire protection: Tape winding F - Fasten™ terminal / Molded Magnet wire protection: Molded Electrical entry* Magnet wire protection: Molded Note) The foot bracket Is J) packed with avalve. Material and insulation type . Note) For delonlzed water: The armature J) assembly Is a corrosion resistant Thread type Port size • Orifice size

Compact Direct Operated 3 Port Solenoid Valve For Water and Air Series VDW200/300 Standard Specifications Valve construction Direct operated poppet Valve specifications Fluid Note 2) Water (except waste water or agricultural water), Air, Low vacuum Withstand pressure (MPa) 2.0 Ambient temperature (°C) –10 to 50 Fluid temperature (°C) 1 to 50 (No freezing) Environment Location without corrosive or explosive gases Valve leakage (cm3/min) 0 (with water pressure) / 1 (Air) Mounting orientation Unrestricted Vibration/Impact (m/s2) Note 4) 30/150 Coil specifications Rated voltage 24 VDC, 12 VDC, 100...

Component Parts

(Bracket mounting hole) Bracket assembly part no.

I Please contact SMC for detailed dimensions, specifications and lead times. Oil-free Specification Lead Wire Length: 600 mm Seal Material: Kalrez®

Safety Instructions These safety instructions are intended to prevent a hazardous situation and/or equipment damage. These instructions indicate the level of potential hazard by labels of "Caution", "Warning" or "Danger". To ensure safety, be sure to observe ISO 4411 Note1>, JIS B 8370 Note2) and other safety practices. Operator error could result in injury or equipment damage. Operator error could result in serious injury or loss of life. I In extreme conditions, there is a possible result of serious injury or loss of life. | Note 1) ISO 4414: Pneumatic fluid power- General rules relating to...