Catalogs >
SMC >
Vacuum Pad

Vacuum Pad
16Pages

Catalog excerpts

Good for film packaging applications where the shape of the workpiece changes easily from being lifted. ˾ Silicone rubber compliant with the FDA (USA Food and Drug Administration) 21CFR§177.2600 elution test is used. ˾ Blue coloured pad Easy to distinguish the vacuum pad by colour during contamination inspection. ˾ Reduced leakage Vacuum pressure [kPa] Sealing skirt design, better sealing performance even for thin films. –80 Comparison of vacuum pressures when adsorbing film Flat type pad/ Flat type pad with ribs ˾ Reduction of wrinkles made on thin workpieces (film, vinyl, etc.) during adsorption Wrinkle prevention with the stopper in the centre of the vacuum pad

Open the catalog to page 1

Vacuum Inlet/Mounting ■ Vertical Vacuum Inlet, With Adapter ■ Vertical Vacuum Inlet, With Buffer

Open the catalog to page 2

Pad diameter Symbol Pad diameter Ø 20 20 Ø 25 25 Ø 35 35 Ø 50 50 Material Silicone rubber Complies with the FDA (USA Food and Drug Administration) 21CFR§177.2600 elution test. Dimensions: Pad Unit ZP3P-25PTSF [Weight: 2.2 g]

Open the catalog to page 3

Vertical vacuum inlet With adapter Dimensions: With Male Thread AdapterZP3P-T20PTSF-A5 [Weight: 3.9 g] ZP3P-T20PTSF-AG1 [Weight: 5.9 g] ZP3P-T25PTSF-A5 [Weight: 4.3 g] ZP3P-T25PTSF-AG1 [Weight: 6.3 g]

Open the catalog to page 4

Vertical Vacuum Inlet, With Adapter Dimensions: With Male Thread Adapter ZP3P-T35PTSF-A12 [Weight: 20.7 g] Width across flats 21 Width across flats 21 Width across flats 21 Width across flats 21 Width across flats 21 Width across flats 21

Open the catalog to page 5

ZP3P Series Dimensions: With Female Thread Adapter ZP3P-T20PTSF-B5 [Weight: 4.9 g] M5 x 0.8 Width across flats 14 M5 x 0.8 Width across flats 14 M8 x 1.25 Width across flats 21

Open the catalog to page 6

Vertical Vacuum Inlet, With Buffer ZP3P Series Vertical vacuum inlet With buffer ZP3P-T20PTSFJ10-B5 Pad diameter Vacuum inlet Buffer specification A Precautions Be sure to read this before handling the products. Refer to the back cover for safety instructions. For vacuum equip-I ment precautions, refer to the “Handling Precautions for SMC Products” and the “Operation Manual” on the SMC I website: http://www.smc.eu _Operating Precautions_ ACaution 1. Cautions for selecting buffer Buffers have general industrial grease applied, and are therefore not compliant with FDA. Metal wear particles...

Open the catalog to page 7

Vertical Vacuum Inlet, With Buffer Dimensions: With Buffer ZP3P-T50PTSFJ˾-B01 Width across flats 13 Width across flats 13 Width across flats 19 D Width across flats 13 Width across flats 13 Width across D flats 19 Width across flats 21 Width across flats 21

Open the catalog to page 9

Male thread Female thread

Open the catalog to page 10

IZP3P Series Parts Structure With Type T Adapter 2 T male thread adapter assembly (With gasket) @ Buffer assembly W T female thread adapter

Open the catalog to page 11

Mounting Adapter Part Nos. Male Thread Adapter ZP3PA-T1-A5 [Weight: 2.1 g] Width across flats 21 Width across flats 2.5 Seal washer Seal washer Width across flats 21 Width across flats 14 Seal washer Width across flats 21 Female Thread Adapter ZP3PA-T1-B5 [Weight: 3.1 g] Width across flats 21 5 Width across flats 14

Open the catalog to page 12

Buffer Assembly Part Nos. q ZPB2J10-B5 [Weight: 21.8 g] w ZPB2J20-B5 [Weight: 35.9 g] Buffer assembly part no. Buffer assembly part no. Width across flats 14 Width across flats 14 3 3 M5 x 0.8 Width across flats 8 M5 x 0.8 Width across flats 8 Applicable pad with adapter part no. Applicable pad with adapter part no. Buffer assembly part no. Width across flats 13 ZPB3K20-B01 Width across flats 13 Width across flats 13 Width across flats 13 Buffer assembly part no. Width across flats 19 D Width across flats 19 Applicable pad with adapter part no. Applicable pad with adapter part no.

Open the catalog to page 13

These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.” They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC)*1^ and other safety regulations. A Caution A Warning A Danger Caution indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. | Warning indicates a hazard with a medium level of risk which, if not avoided, could result in death...

Open the catalog to page 16