*mydirectindustry

Catalogs
SMC
Série JXC5H/6H

Série JXC5H/6H

Product catalog summary

Specifications and Performance:
The LEFS-F Series electric actuators feature significant improvements in speed and acceleration, with a maximum speed of 1500 mm/s and acceleration of 9800 mm/s². The cycle time is reduced by 33%, enhancing efficiency.

Model Selection Procedure:
Model selection is based on work load-speed, cycle time, and allowable moment. A speed-work load graph aids in selecting the appropriate model, and cycle time is calculated using a specific formula.

Graphical Data:
Speed-work load graphs illustrate the relationship between speed, acceleration, and work load, assisting in model selection.

Dynamic Allowable Moment:
Graphs help determine allowable overhang based on work load and acceleration, ensuring the load factor does not exceed 1.

Ordering Information:
Details on ordering include motor type, size, lead, stroke, and additional options.

Compliance and Caution:
EMC compliance is noted, with a dependency on the customer's control panel configuration.

Specifications:
The LEFS-F Series includes models with stroke lengths from 150 mm to 1200 mm, designed for use with step motors and compatible with incremental encoders.

Procedures:
Mounting instructions emphasize clearance to avoid interference and detail the procedure for mounting auto switches.

Standards and Recommendations:
Recommendations include setting the height of surfaces due to chamfering and ensuring no interference with surrounding facilities.

Auto Switch Specifications:
Specifications for the D-M9 series auto switches include electrical entry direction, wiring type, and compliance standards.

Controller Specifications:
The JXC5H/6H Series controllers support step motors, feature parallel I/O configurations, and specify operating conditions.

Mounting Instructions:
Instructions for mounting the controller include diagrams for wiring and specify the use of an I/O cable.

Specifications and Components:
Details for the JXC5H/6H Series Controller include power supply connections and control instructions.

Step Data Settings:
Step data settings for positioning and pushing operations are detailed, with necessary parameter adjustments.

Signal Timing and Operations:
Signal timing diagrams illustrate operations for returning to origin, positioning, and pushing.

Hardware and Connectivity:
Hardware requirements include controller setting software and communication cables.

Safety Instructions:
Safety instructions emphasize adherence to standards and highlight potential hazards.

Warranty and Compliance:
The warranty period is specified, with compliance requirements prohibiting use in weapon manufacturing.

Product Compatibility and Responsibility: Compatibility must be determined by the equipment designer, with responsibility for performance and safety assurance.

Operator Training: Only trained personnel should operate machinery, with assembly and maintenance by experienced operators.

Safety Measures for Servicing: Safety measures must be confirmed before servicing to prevent accidents.

Special Conditions and Safety Considerations: Contact SMC for safety measures if used in critical applications or outside specified conditions.

Contact Information: Contact details for SMC Corporation offices in Europe are provided for assistance.

Catalog excerpts

High Performance Electric Actuator Cycle time can be reduced. Cycle time compared with the existing model∗1 ∗1 When LEFS25FH-400 is operated from 0 to 400 mm. Acceleration/ Deceleration % increase compared with the existing model) % compared with the existing model) Existing model High Performance Parallel I/O Step Motor Controller Higher acceleration and maximum speed can be set with the special controller (for LEFS२F Series).

Open the catalog to page 1

Electric Actuator/Slider Type High Performance Step Motor (Servo/24 VDC) Ball Screw Drive/LEFS२F Series Model Selection Selection Procedure Step 1 Check the work load– speed. Step 2 Check the cycle time. Check the allowable moment. Selection Example țWorkpiece mass: 10 [kg] țSpeed: 300 [mm/s] țWorkpiece mounting condition: Work load: W [kg] Operating conditions țMounting orientation: Horizontal upward Step 1 Check the work load–speed. (pages 2 to 5) Select a model based on the workpiece mass and speed while referencing the speed–work load graph. Selection example) The LEFS25FA-200 can be temporarily...

Open the catalog to page 2

Model Selection High Performance Step Motor (Servo/24 VDC) Speed–Work Load Graph (Guide) Model Selection ∗ The following graphs show the values when moving force is 100 %. LEFS16FA/Ball Screw Drive Horizontal/Lead 10 Auto Switch LEFS16FB/Ball Screw Drive Horizontal/Lead 5

Open the catalog to page 3

LEFS२F Series High Performance Step Motor (Servo/24 VDC) Speed–Work Load Graph (Guide) ∗ The following graphs show the values when moving force is 100 %. LEFS25FH/Ball Screw Drive Horizontal/Lead 20 LEFS25FA/Ball Screw Drive Horizontal/Lead 12 LEFS25FB/Ball Screw Drive Horizontal/Lead 6

Open the catalog to page 4

Model Selection High Performance Step Motor (Servo/24 VDC) Speed–Work Load Graph (Guide) Model Selection ∗ The following graphs show the values when moving force is 100 %. LEFS32FH/Ball Screw Drive Horizontal/Lead 24 Auto Switch LEFS32FA/Ball Screw Drive Horizontal/Lead 16 LEFS32FB/Ball Screw Drive Horizontal/Lead 8

Open the catalog to page 5

LEFS२F Series High Performance Step Motor (Servo/24 VDC) Speed–Work Load Graph (Guide) ∗ The following graphs show the values when moving force is 100 %. LEFS40FH/Ball Screw Drive Horizontal/Lead 30 LEFS40FA/Ball Screw Drive Horizontal/Lead 20 LEFS40FB/Ball Screw Drive Horizontal/Lead 10 Acceleration: 3000 mm/s2 Work load: W [kg]

Open the catalog to page 6

Model Selection High Performance Step Motor (Servo/24 VDC) Load overhanging direction Auto Switch m : Work load [kg] Me: Dynamic allowable moment [N·m] L : Overhang to the work load center of gravity [mm] Model Selection ∗ This graph shows the amount of allowable overhang (guide unit) when the centre of gravity of the workpiece overhangs in one direction. Dynamic Allowable Moment

Open the catalog to page 7

LEFS२F Series High Performance Step Motor (Servo/24 VDC) ∗ This graph shows the amount of allowable overhang (guide unit) when the centre of gravity of the workpiece overhangs in one direction. Dynamic Allowable Moment Orientation Load overhanging direction m : Work load [kg] Me: Dynamic allowable moment [N·m] L : Overhang to the work load centre of gravity [mm] Calculation of Guide Load Factor 1. Decide operating conditions. Acceleration [mm/s2]: a Model: LEFS२F Work load [kg]: m Size: 25/32/40 Work load centre position [mm]: Xc/Yc/Zc Mounting orientation: Horizontal/Bottom/Wall/Vertical 2....

Open the catalog to page 8

Model Selection High Performance Step Motor (Servo/24 VDC) Model Selection Table Accuracy (Reference Value) A side Travelling parallelism [mm] (Every 300 mm) Model w D side travelling q C side travelling parallelism to A side parallelism to B side 0.03 ∗ Travelling parallelism does not include the mounting surface accuracy. (Excludes when the stroke exceeds 2000 mm) Auto Switch Table Displacement (Reference Value) 0.08 Load W [N] ∗ This displacement is measured when a 15 mm aluminium plate is mounted and ﬁxed on the table. ∗ Check the clearance and play of the guide separately. Overhang Displacement...

Open the catalog to page 9

High Performance Electric Actuator/Slider Type Ball Screw Drive LEFS२F Series !2 For details on controllers, refer to page 24. Basic type High-precision type e Motor mounting position — Applicable size High performance (Step motor 24 VDC) Compatible controllers Note Applicable stroke None With (Includes 1 mounting bracket) o Grease application (Seal band part) — N With Without (Roller speciﬁcation) Without option With lock Housing B bottom∗6 Body bottom 2 locations Standard cable [m] None — 1.5 S1 Body bottom

Open the catalog to page 10

High Performance Electric Actuator/Slider Type Ball Screw Drive Model Selection !2 Controller Without controller With controller C6H7 3 I/O cable length Screw mounting DIN rail Parallel I/O (NPN) type Parallel I/O (PNP) type Number of axes/Special speciﬁcation H 1 axis/High performance type ∗1 Please consult with SMC for non-standard strokes as they are produced as special orders. ∗2 Excluding the LEFS16 ∗3 If 2 or more are required, please order them separately. (Part no.: LEF-D-2-1 For details, refer to the Web Catalogue.) ∗4 The auto switches must be ordered separately. (For details, refer...

Open the catalog to page 11

LEFS२F Series Speciﬁcations LEFS16F Actuator speciﬁcations Stroke range Max. acceleration/deceleration Horizontal [mm/s2] Vertical Positioning repeatability Basic type [mm] High-precision type Basic type High-precision type Actuation type Ball screw Guide type Linear guide Operating temperature range [°C] Operating humidity range [%RH] Lock unit speciﬁcations Electric speciﬁcations Motor size Motor type Encoder Incremental A/B phase (800 pulse/rotation) 24 VDC ±10 % Rated voltage [V] Standby power consumption when operating [W]∗5 Max. power consumption [W]∗6 Type∗7 Holding force [N] Power consumption...

Open the catalog to page 12

High Performance Electric Actuator/Slider Type Ball Screw Drive Additional weight with lock [kg] Additional weight with lock [kg] Additional weight with lock [kg] Model Selection Additional weight with lock [kg] Auto Switch

Open the catalog to page 13

Série JXC5H/6H

Série JXC5H/6H

Catalog excerpts

All SMC catalogs and technical brochures

Archived catalogs