Rotary Actuator Compact auto switches are mountable. (D-M9) Existing model Compact auto switches are mountable on 2 surfaces. Compact auto switch Space saving by changing the auto switch rail mounting to groove mounting. Angle adjustable type was added. Angle can be adjusted to an appropriate level suitable for applications. Angle adjusting screw Mounting interchangeable with the existing model Weight is reduced by up to 14%. Ȝ Auto switch can be mounted from the front. Ȝ Auto switch can be mounted from the front at any position on the mounting groove. Auto switch can be mounted after installation or when installation condition is changed. Mounting bracket

With cushion valve retaining ring Angle can be adjusted Angle adjustable type to a desired level ' in a range of up to 90 , X Easy adjustment / of cushion valve * • Cushion valve shape is changed so it can be adjusted using a hexagon wrench only. ^ • No protrusion from the body I • Retaining ring is used to prevent r drop-out. Port, cushion and auto switch are on the same surface. • Easy to handle. * Cushion valve cannot be mounted on the size 30 and air-hydro type. < Cushion seal is replaceable. Cushion seal has been made replaceable. (Not possible for existing model. Cushion seal only)...

Standard : 2 types Semi-standard : 6 types • Shaft type can be selected to suit the specification. • Part number is assigned for shaft types <single round shaft, double shaft (round shaft, with four chamfers), double round shaft>. Single shaft with four chamfers: CRA1BX Double shaft with key: CRA1BY Double shaft with four chamfers: CRA1BZ Single round shaft: CRA1BT Double shaft (round shaft, with four chamfers): CRA1BJ Single round shaft, double shaft (round shaft, wit chamfers), double round shaft are made to order. Series Variati Type Double shaft Single shaft with four chamfers Shaft type...

Rotary Actuator Series CRA1 Rack & Pinion Type/Size: 30, 50, 63, 80,100How to Order Z- With auto switch Built-in magnet Mounting Size Rotating angle B Note) Except size 30 Air cushion Made to Order Refer to page 2. Number of auto switches Note 1) For foot bracket and part number, refer to page 2. Note 2) Foot bracket is included in the same package, (but not assembled). Note 3) Except size 30 Shaft type Note) Except air-hydro type and size 30 Note) Up to two auto switches are mountable. Auto switch Without auto switch (Built-in magnet) Note 1) Flange type is not available for T, J, K. Note 2)...

Rotary Actuator Rack & Pinion Type SeneS CRAI Specifications Type * Since the CRA1D30 has a stopper installed, there is no backlash produced under pressure. Effective Torque Symbol * X7: Not available for the built-in magnet type * With 2 auto switches Foot Bracket/Part No. Size * Size 30 does not include collars. * Remove the basic type mounting screws and use the mounting screws included in the foot bracket to secure the foot bracket to the cover. Use the collar as a spacer for the cover counterbore part and secure it together with the foot. * For size 30, be careful not to drop the cover when...

98 (117)/With auto switch 84 (103)/Without auto switch Auto switch 8 x M5 x 0.8 depth 6 (Opposite side 4 locations) ¡Dimensions show pressurisation to B port. ¡Drawing shows that the auto switch is mounted on the side opposite to the port side. (Dimensions with an asterisk mark (*) are not required for actuators without the auto switch.) ∗ ( ) are the dimensions for rotation of 180°. Note) A parallel key is included in the same pac

Rotary Actuator Rack & Pinion Type Size: 50/63/80/100 Single shaft: CRA1BS W 2 x Cushion valve (Width across flats 3) Simple Specials Auto Switch Mounting Auto switch øD is the shaft dimension. 8 x J (Opposite side 4 locations) Note) Other dimensions are the same as the single shaft type. ¡Dimensions show pressurisation to B port. ¡Drawing shows the auto switch mounted on the port side. ∗ ( ) are the dimensions for rotation of 180° and 190°. Size Port size With auto switch Without auto switch Note) A parallel key is included in the same p

Dimensions/Basic Type: CRA1B Size: 30/50/63/80/100 Single shaft with four chamfers: CRA1BX Double shaft with four chamfers: CRA1BZ øL Double shaft with key: CRA1BY Note) Other dimensions are the same as the single shaft type. Note) Other dimensions are the same as the single shaft type. Note) Other dimensions are the same as the single shaft type. Double shaft (round shaft, with four chamfers): CRA1BJ Double round shaft: CRA1BK Single round shaft: CRA1BT Note) Other dimensions are the same as the single shaft type. Size Note) Other dimensions are the same as the single shaft type. Note) Other...

Rotary Actuator Rack & Pinion Type SeneS CRAI Dimensions/Foot Type: CDRA1LD Size: 30 • Dimensions show pressurisation to B port. • Drawing shows that the auto switch is mounted on the side opposite to the port side. * ( ) are the dimensions for rotation of 180°. Note) Other dimensions are the same as the basic type. • Dimensions show pressurisation to B port. • Drawing shows the auto switch mounted on the port side. * ( ) are the dimensions for rotation of 180° and 190°.

Single shaft with four chamfers: CDRA1FX Series CRA1Dimensions/Flange Type: CDRA1FD Size: 50/63/80/100 Single shaft: CDRA1FS Double shaft: CDRA1FW Note) Other dimensions are the same as Note) Other dimensions are the same as the single shaft type. the single shaft type. Double shaft with key: CDRA1FY Double shaft with four chamfers: CDRA1FZ Note) Other dimensions are the same as the basic type. Note) Other dimensions are the same as the single shaft type. The dimensions of shaft key and four chamfers are the same as the basic type.

Component Parts Rotary Actuator Rack & Pinion Type SeneS CRAI Size 30 Without air cushion With auto switch Size 50 to 100 Without air cushion With auto switch Size 50 to 100 With air cushion I-1 i1" Replacement Parts Note 1) When ordering replacement parts, write “1” for one set of the parts per actuator. Note 2) Replacement parts for different rotation angles are set only for size 30. A grease pack (10 g) is included. If an additional grease pack is needed, order with the following part number. Grease pack part number: GR-S-010 (10 g)