1. Catalogs
  2. SMC
  3. LVM series

LVM series

LVM series
1 / 28 PagesView full catalog

LVM series

Product catalog summary
Overview: The document outlines the specifications and features of Series LVM solenoid valves, designed for chemical applications. These compact, direct-operated valves are suitable for various analytical and inspection equipment.
Specifications: The valves come in different orifice diameters (1.1 mm to 2 mm) and are made from materials like PEEK, EPDM, FKM, and Kalrez®. They handle fluids such as air, water, and cleaning solvents, with an operating pressure range of -75 kPa to 0.3 MPa and a proof pressure of 0.3 MPa.
Design and Construction: Featuring a diaphragm type direct-operated poppet construction, the valves are available in 2/3 port configurations and can be mounted in various orientations. The body and plate materials are primarily PEEK, with diaphragms made from EPDM, FKM, and Kalrez®.
Performance: The valves have a service life of over 10 million cycles, a response time of 10 ms or less, and exhibit zero leakage under water pressure conditions. They minimize pumping volume changes, ensuring no fluid discharge when switching from ON to OFF.
Power Consumption: Available with a power-saving circuit option, the valves reduce holding power consumption. Standard power consumption is 2 W, with specific inrush and holding power values for different models.
Applications: Suitable for analytical instruments in blood, urine, and immune system analysis, these valves meet advanced process control needs.
Additional Features: The valves offer various piping and mounting options, including M5 thread and tubing types, with optional accessories like brackets and manual operation features.
Safety Instructions: Emphasizing safety practices, the document references ISO 4414 and JIS B 8370 standards. Hazard levels are defined as Danger, Warning, and Caution, with specific guidelines to prevent injury or equipment damage.
Design and Selection: System designers are responsible for equipment compatibility, verified through specifications, analysis, and testing. Only trained personnel should operate machinery, ensuring safety before servicing.
Mounting and Operation: Proper mounting and function tests are essential post-installation. Vertical mounting with the coil on top is recommended. Fluid compatibility and specified pressure and temperature ranges must be maintained.
Maintenance and Environment: Fluid and power supplies should be shut off before removal. Avoid use in explosive atmospheres or areas with excessive vibration or heat.
Electrical and Piping Considerations: Circuits should prevent contact chattering, maintaining voltage within ±10% of the rated value. Correct wiring is crucial to avoid coil damage, and piping should be cleaned before connection.
Specifications and Procedures: Detailed specifications and procedures for handling and installing SMC solenoid valves are provided, emphasizing correct tightening torque for fittings.
Tightening Torque: Proper torque varies by model and mounting type, ranging from 0.1 to 2 N·m.
Fluid Properties and Precautions: Special attention is required for fluids that crystallize or clot. Filters are recommended for water and air.
Operating Environment and Maintenance: Avoid explosive atmospheres, excessive vibration, and heat sources. Maintenance involves shutting off supplies before removal.
Wiring and Electrical Considerations: Ensure circuits do not generate chattering, use correct voltage, and avoid external forces on wiring.
Piping Instructions: Piping should be flushed before connection, and tubing should be inserted straight into the nipple.
Contact Information: Contact details for SMC subsidiaries worldwide are provided for customer support.
See more

Catalog excerpts

LVM series-1

Compact Direct Operated 2/3 Port Solenoid Valve for Chemicals Wetted part material: Body/Plate PEEK Diaphragm Choice of EPDM FKM, EPDM, FKM Kalrez Service life: Note) 10 million cycles or more (Based on SMC test conditions) Diaphragm s! iation e var Plate Mor Orifice diameter 1.4 mm New Orifice diameter New 1.6 mm New Orifice diameter 2 mm Orifice diameter 1.1 mm LVM09/090 LVM10/100 LVM15/150 LVM20/200 Note) Kalrez® is a registered trademark of DuPont Performance Elastomers. Series LVM CAT.EUS70-30B-UK

 Open the catalog to page 1
LVM series-2

Meeting the most advanced needs of process control Compact Direct Operated 2/3 Port Valve chamber volume Series LVM09/090 Valve chamber volume LVM10 18 (For LVM11) Unit: µl LVM10/100 LVM15/150 LVM20/200 11 20 50 84 Change in volume depending on the open/closed status of the valve (pumping volume) 0.01 µl or less (Rocker type) “Pumping volume” refers to the volume of water that is expelled from the valve chamber by the opening and closing action of the valve (once, with no applied pressure). With a normal diaphragm valve, because the valve chamber volume varies depending on the ON or OFF status,...

 Open the catalog to page 2
LVM series-3

Solenoid Valve for Chemicals (Rocker type) © I I Valve chamber volume © I I Body/Plate material: PEEK Piping/Mounting Variations Body ported Tubing type Base mounted Without sub-plate With sub-plate

 Open the catalog to page 3
LVM series-4

Series Variations Model Valve construction LVM09R3 LVM09R4 Valve type Orifice Number Operating pressure Valve diameter of ports range width (mm) N.C. Diaphragm type direct operated poppet (Rocker type) 2 LVM11 Diaphragm type direct operated poppet LVM10R1 1.5 13 1.4 13 1.4 13 –75 kPa to 0.25 MPa (0 to 0.6 MPa) 1.6 (1) 16 –75 kPa to 0.3 MPa 2 2 20 9.5 3 N.C. 0 to 0.25 MPa –75 kPa to 0.25 MPa Universal 1.1 –75 kPa to 0.25 MPa LVM095R –75 kPa to 0.2 MPa N.O. N.C. 2 LVM10R2 N.O. LVM102R Universal LVM10R3 N.C. LVM10R4 N.O. LVM10R6 N.C. LVM105R LVM15R3 Diaphragm type direct operated poppet (Rocker...

 Open the catalog to page 4
LVM series-5

* The values for Av and Cv are based on JIS B 2005:1995, C and b are based on JIB B 8390:2000.

 Open the catalog to page 5
LVM series-6

Compact Direct Operated 2/3 Port Solenoid Valve for Chemicals Series LVM09/090 How to Order Base Mounted LVM 09R3 5 A Q Symbol Number Symbol of ports Lead wire length Valve type – 09R3 N.C. IN (Symbol 1) OUT (Symbol 2) IN (Symbol 3) 3 6 OUT (Symbol 2) ∗ "–" cannot be selected in the case of function Y1. 2 09R4 N.O. Wetted part material Coil voltage Symbol 095R 3 Universal 1 3 5 6 2 Voltage 24 VDC 12 VDC – Valve construction Valve type Number of ports Fluid Note 1) Operating pressure range Orifice diameter Response time Leakage Proof pressure Note 2) Ambient temperature Fluid temperature Volume...

 Open the catalog to page 6
LVM series-7

2/3 Port Solenoid Valve for Chemicals Series LVM09/090 Construction: Base Mounted

 Open the catalog to page 7
LVM series-8

Dimensions: Base Mounted * The broken lines indicate "with power-saving circuit". With power-saving circuit Recommended interface dimensions * Surface roughness = Rz3.2 or less Effective thread length When using a positioning pin for * Surface roughness = Rz3.2 or less When using a positioning pin for Effective thread length

 Open the catalog to page 8
LVM series-9

Compact Direct Operated 2/3 Port Solenoid Valve for Chemicals Body Ported Base Mounted • For LVM11, the type with power- saving circuit is standard. Coil voltage -• Wetted part material Wetted part material « Only Option 1 can be selected for Lead wire length «Without a sub-plate, a bracket cannot Sub-plate material/Port size ' Combinations with wetted part

 Open the catalog to page 9
LVM series-10

Series LVM10/100 Specifications Body ported Model Body ported (Tubing type) LVM11 Valve construction LVM10R1 LVM10R2 LVM102R LVM10R3 LVM10R4 LVM10R6 LVM105R Diaphragm type direct operated poppet Diaphragm type direct operated poppet (Rocker type) Valve type N.C. Number of ports N.C. 2 N.O. Universal 2 Fluid Note 1) N.C. Universal 2 3 3 –75 kPa to 0.25 MPa 1.5 mm 1.4 mm Orifice diameter 10 ms or less (at pneumatic pressure) Leakage Zero leakage, either external or internal (at water pressure) Proof pressure Note 2) 0.38 MPa Ambient temperature 0 to 50°C Fluid temperature 0 to 50°C (with no condensation)...

 Open the catalog to page 10
LVM series-11

Compact Direct Operated . » i/n/u n/1 fifi 2/3 Port Solenoid Valve for Chemicals SeneS L VIVI 7 U/1 UU Construction: Body Ported

 Open the catalog to page 11
LVM series-12

Construction: Base Mounted_

 Open the catalog to page 12
LVM series-13

Compact Direct Operated . » ^ n/j00 2/3 Port Solenoid Valve for Chemicals SeneS L VIVI 7 U/1 UU Dimensions: Body Ported KOUT port Mounting hole * The broken lines Indicate "with bracket". Push type /Manual override

 Open the catalog to page 13
LVM series-14

Series LVM10/100 Dimensions: Base Mounted LVM10R3-- (N.C.) LVM10R4-- (N.O.) LVM10R6-- (N.C.) LVM105R-- (Universal) 20.5 16.5 4.5 4 8.5 3x (6.5) (6.5) 8.5 4.5 <18.5> 7 2 x ø2.2 Mounting hole 4 2x ø2. 4 4.5 24.5 ø2 .4 24.5 ∗ Figures in brackets < > indicate the values for the PFA plate material (wetted part material “E, F, G”). In case of the PFA plate material (wetted part material “E, F, G”), there is no ø1.6 positioning hole. UL1007 AWG22 Push type Manual override ø1.6 depth 2.2 2x 4.5 ø2. 4.5 4 4.5 7 24.5 LVM10R3 9.5 24.5 LVM10R6 3 Recommended interface dimensions ∗ Surface roughness = Rz3.2...

 Open the catalog to page 14
LVM series-15

Compact Direct Operated 2/3 Port Solenoid Valve for Chemicals Series LVM10/100 Dimensions: Base Mounted LVM10R3-- (N.C.) LVM10R4-- (N.O.) LVM10R6-- (N.C.) LVM105R-- (Universal) 6 2 x M3 Thread length 5 For direct mounting ≈300 (Lead wire length) Plug (16) 5 IN port LVM10R4 13 UL1007 AWG22 (16) 1 2 3 N.C. N.O. 11 16 11 13 1 2 3 N.C. N.O. IN port 73.5 Push type Manual override 10 OUT port LVM10R6 19 2 (COM) port (LVM105R) Plug (LVM10R6) (16) 11 1 (N.C) port 10 3 (N.O) port LVM105R 24.5 2 x ø3.5 Mounting hole 3 x M6, 1/4-28UNF OUT port (LVM10R3, 10R4) (2) 6 Plug 21 12 5 1 2 3 N.C. N.O. 11 (16) 11...

 Open the catalog to page 15
LVM series-16

Compact Direct Operated 2/3 Port Solenoid Valve for Chemicals Series LVM15/150 How to Order Base Mounted LVM 15R3 Y 5 A Q Symbol Number Symbol of ports Valve type Lead wire length 15R3 N.C. – IN (Symbol 1) 6 10 OUT (Symbol 2) 300 mm 600 mm 1000 mm 2 Wetted part material 15R4 N.O. IN (Symbol 3) Coil voltage OUT (Symbol 2) Symbol 5 6 155R 3 Universal 1 3 2 Voltage 24 VDC 12 VDC Y HY Plate PEEK PEEK PEEK Diaphragm EPDM FKM Kalrez® Specifications Standard (With power-saving circuit) High-pressure type (With power-saving circuit) Specifications Flow Characteristics LVM15R3 Base mounted LVM15R4 LVM155R...

 Open the catalog to page 16

All SMC catalogs and technical brochures

  1. Serie HRR

    64  Pages

  2. Série VP/VG

    33  Pages

  3. Série XL

    27  Pages

  4. Série JXC5H/6H

    36  Pages

  5. JMB series

    13  Pages

  6. JCM series

    21  Pages

  7. PF3A7*H

    40  Pages

  8. PF3W

    34  Pages

  9. Water Treatment

    16  Pages

  10. Vacuum Pad

    16  Pages

  11. Rotary Actuator

    40  Pages

  12. Compact Slide

    24  Pages

  13. Air Cylinder

    124  Pages

  14. JMGP series

    16  Pages

  15. ISO Cylinder

    32  Pages

  16. IZD10

    20  Pages

  17. IZH10

    8  Pages

  18. Check Valves

    4  Pages

  19. Series ZL

    20  Pages

  20. Series CM2

    92  Pages

  21. Series IDGA/IDG

    56  Pages

  22. IDH-A

    12  Pages

  23. CP96-C96-B

    74  Pages

  24. CVQ

    24  Pages

  25. HY

    52  Pages

  26. VNA

    10  Pages

  27. Series MXY

    28  Pages

  28. Series MXP

    39  Pages

  29. Air Slide Table

    132  Pages

  30. S0700

    112  Pages

  31. SYJ

    96  Pages

  32. SY - NEW

    164  Pages

  33. VF

    60  Pages

  34. C(D)55 series

    24  Pages

  35. C(D)Q2 series

    216  Pages

  36. MGP series

    36  Pages

  37. 11-LEFS series

    19  Pages

  38. LECS series

    16  Pages

  39. LECPA series

    4  Pages

  40. KQ series

    80  Pages

  41. IDF series

    16  Pages

  42. ZP series

    69  Pages

  43. MHF series

    32  Pages

  44. MHZ series

    68  Pages

  45. CRB series

    44  Pages

  46. MGJ series

    7  Pages

  47. AC series

    98  Pages

  48. VH series

    14  Pages

  49. LVA series

    43  Pages

  50. VDW series

    28  Pages

  51. VX2 series

    32  Pages

  52. MXH series

    32  Pages

  53. MXF series

    12  Pages

  54. CXW series

    48  Pages

  55. CXS series

    76  Pages

  56. CQS series

    40  Pages

  57. CQM series

    28  Pages

  58. CLQ series

    36  Pages

Archived catalogs

  1. KR

    7  Pages

  2. KF

    16  Pages

  3. AFF

    80  Pages

  4. HAA

    3  Pages

  5. ZFA

    14  Pages

  6. ZA

    13  Pages

  7. D

    117  Pages

  8. RB

    23  Pages

  9. cep

    44  Pages

  10. rsq

    30  Pages

  11. CLK

    51  Pages

  12. MK

    20  Pages

  13. CLJ

    65  Pages

  14. ARG

    48  Pages

  15. VXA

    17  Pages

  16. MXU

    12  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.