Compact Cylinder With Solenoid Valve Valve and compact cylinder integrated for compactness New Bore sizes ø50, ø63 added. Solenoid valve Compact cylinder Labour saving • No need to select size of valve • Less piping work Energy saving Space saving Air consumption between the valve and cylinder reduced by approximately 50%. Small mounting space with valve integrated structure Piping is possible with a single tube. Restrictor with silencer (Mounting example)

Easy Mounting Easy Mounting Height Comparison (Dimensional difference: C) CVQ C B Possible to set wiring and piping entries in the same direction. Standard stroke Sideg pipin Approx. % reduction in air consumption by reducing the piping between the valve and cylinder Selectable Piping Direction Mounting Example • Cylinder bore size: ø32 mm • Piping: I.D. ø4 mm Length 2 m Bore size

Compact Cylinder With Solenoid Valve 5 M Port thread type Mounting Through-hole, Both B ends tapped (Standard) Foot L Rod flange F Head flange G Double clevis D ∗ Mounting brackets are included, (but not assembled). Standard Axial Standard piping Axial piping Cylinder stroke (mm) Please refer to the next page for “Standard Stroke” and “Intermediate Stroke”. Manual override — Body option — Standard (Rod end female thread) With boss in head end Rod end male thread The combination of body options is available. Example) FM Non-locking push type Locking slotted type Surge voltage suppressor Without...

Series CVQ Cylinder Specifications 32 Bore size (mm) Action Double acting, single rod Proof pressure Maximum operating pressure Minimum operating pressure Ambient and fluid temperature Stroke tolerance Mounting method Through-hole / Both ends tapped Piston speed Rubber bumper ∗ Stroke length tolerance does not include variations in the bumper value. Valve Specifications Caution Do not separate the cylinder from the valve. Manual override Non-locking push type / Locking slotted type Pilot exhaust Double acting: single rod With boss in head end Main/Pilot valve common exhaust type Mounting orientation...

Compact Cylinder With Solenoid Valve Weight Weights Unit (g) Calculation: (Example) CVQB32-20M • Basic moving part weight: CVQB32-20 ····················· 88 g • Additional weight: Rod end male thread ······· 43 g 131 g Additional Weight Bore size (mm) Axial piping Male thread Foot (including mounting bolt) Rod flange (including mounting bolt) Head flange (including mounting bolt) Double clevis (including pin, retaining ring, bolt) Rod end male thread With boss in head end Mounting Bolt for CVQ Mounting: Be sure to use it as through-hole when mounting. Mounting bolt Ordering: Add the word, “Bolt”...

Series CVQ Allowable Kinetic Energy Rod End Allowable Lateral Load Lateral load Rod end allowable lateral load (N) The allowable lateral load applied to the rod end is as shown above. Do not use exceeding the value shown by the graph. Relationship between Number of Needle Rotations and Piston Speed ø32, ø40 Stroke + Eccentric distance (mm) 7 Without Fully restrictor opened Number of restrictor’s needle rotations 2 Restrictor: ASN2-M5 Pressure: 0.5 MPa Mounting orientation: Horizontal, with no load, piston extended ∗ The above piston speed is for reference purpose only. 10 Without Fully restrictor...

Compact Cylinder With Solenoid Valve Construction With boss in head end ø50, ø63 Basic Type Component Parts No. Note Hard anodised Cylinder tube Aluminum alloy Aluminum alloy Carbon steel Hard chrome plated Retaining ring Piston seal Solenoid valve Pilot valve Boss ring Aluminum alloy Hard anodised Carbon steel Nickel plated Aluminum alloy casting ø50, ø63, chromate coating Aluminum alloy Carbon tool steel Phosphate coated Bearing alloy Manual button Replacement parts: Seal Kit Bore size ∗ Seal kit includes !0, !1, !2. Order the seal kit, based on each bore size. ∗ Grease pack must be ordered...

Series CVQ Dimensions: ø32, ø40, ø50, ø63 Basic: CVQB H thread effective depth C Manual button Axial piping With boss in head end (mm) Rod end male thread MM (mm) Bore size (mm) Width across flats B1 (mm) Bore size Stroke range (mm) (mm) Bore size Stroke range RA (mm) (mm) Note 1) The dimensions (A + stroke) and (B + stroke) for 5 mm stroke will be the same as those for 10 mm stroke. Note 2) The dimensions (A + stroke) and (B + stroke) for 10 mm stroke will be the same as those for 15 mm stroke.

Compact Cylinder With Solenoid Valve Dimensions: ø32, ø40, ø50, ø63 Foot: CVQL Rod end male thread (mm) Bore size Stroke range (mm) (mm) Foot bracket material: Carbon steel Surface treatment: Nickel plated Note 1) The dimensions (A + stroke), (B + stroke) and (LS + stroke) for 5 mm stroke will be the same as those for 10 mm stroke. Note 2) The dimensions (A + stroke), (B + stroke) and (LS + stroke) for 10 mm stroke will be the same as those for 15 mm stroke. (mm) Bore size Stroke range (mm) (mm) Flange bracket material: Carbon steel Surface treatment: Nickel plated Note 1) The dimensions (A +...

Series CVQ Dimensions: ø32, ø40, ø50, ø63 Head flange: CVQG (mm) Bore size Stroke range (mm) (mm) Flange bracket material: Carbon steel Surface treatment: Nickel plated Note 1) The dimensions (A + stroke) and (B + stroke) for 5 mm stroke will be the same as those for 10 mm stroke. Note 2) The dimensions (A + stroke) and (B + stroke) for 10 mm stroke will be the same as those for 15 mm stroke. Double clevis: CVQD CT 4xN Cap bolt øCD hole H10 Shaft d9 (mm) Bore size Stroke range (mm) (mm) Double clevis bracket material: Cast iron Surface treatment: Coated Note 1) The dimensions (A + stroke), (B...