Catalogs >
SMC >
Compact Cylinder/Clean series

Compact Cylinder/Clean series
16Pages

Catalog excerpts

1-16-4 Shinbashi, Minato-ku, Tokyo 105-8659, JAPAN URL http://www.smcworld.com ©2004 SMC Corporation All Rights Reserved 04-EUS507-UK Issued: June, 2005 D-DNP P-120 (DN) Compact Cylinder/Clean Series 1011- ø80 and ø100 bore sizes are added to Compact Cylinder (CQ2 Series) / Clean Series How to Order Series CQ2 (ø32, ø40, ø50, ø63, ø80, ø100) Number of auto switches Relief type Vacuum type Auto switch - Without auto switch With auto switch (Built-in magnet) Auto switch type (With auto switch) ∗ For the applicable auto switch model, refer to page 2. ∗ Auto switches are shipped together, (but not assembled). Port thread type - Without auto switch (Built-in magnet) ∗ Refer to the table below for the standard stroke. Double acting Standard (Rod end female thread) Rod end male thread Model Type Relief type Vacuum type Relief port Double acting, Single rod Suction flow (l/min (ANR))∗ Grade 2 (Class 10 equivalent) 5 Grade 1 (Class 1 equivalent) Note 1) ø32, without auto switch, M5 is used for 5 stroke only. Specifications Bore size (mm) Item Proof pressure Maximum operating pressure Minimum ooperating pressure Ambient and fluid temperature Without auto switch: –10°C to 70°C, With auto switch: –10°C to 60°C (No freezing) Cushion Piston speed Stroke length tolerance Mounting Grease

Open the catalog to page 1

Auto Switch Specifications/Refer to Best Pneumatics catalogue for further information on auto switches and other applicable auto switches than listed. Type Reed switch Solid state 2-wire switch 3-wire Load voltage 24 VDC, 100 VAC 24 VDC (10 to 28 VDC) 28 VDC or less Load current range 5 to 40 mA, 5 to 20 mA 2.5 to 40 mA 40 mA or less Indication light Applicable load Relay, PLC 24 VDC Relay, PLC IC circuit, Relay, PLC PLC: Programmable Logic Controller Proper Auto Switch Mounting Position (Detection at Stroke End) and Its Mounting Height Precautions Be sure to read before handling. For...

Open the catalog to page 2

10-CQ2B32 to 50, 11-CQ2B32 to 50 Rod end female thread Q M5 (Relief port) H thread effective depth C 2-øN through 2 x 2-øO counterbore Note 1) Intermediate strokes of (55, 60, 65, 70) and (80, 85, 90, 95) can be manufactured by installing spacers (20, 15, 10, 5 mm) in a standard stroke cylinder of 75 stroke or 100 stroke respectively. Therefore, the dimensions are the same as those of 75 or 100 stroke cylinder. Width across flats K Hexagon width across flats B1 Note 1) Intermediate strokes of (55, 60, 65, 70) and (80, 85, 90, 95) can be manufactured by installing spacers (20, 15, 10, 5 mm)...

Open the catalog to page 3

10-CDQ2B32 to 50, 11-CDQ2B32 to 50 Rod end female thread Q M5 (Relief port) H thread effective depth C 2-øN through 2 x 2-øO counterbore Minimum lead wire bending radius 10 Auto switch D-A73, A80 Auto switch shown above is D-A73 type and D-A80 type. Stroke range Note 1) Note 1) Intermediate strokes of (55, 60, 65, 70) and (80, 85, 90, 95) can be manufactured by installing spacers (20, 15, 10, 5 mm) in a standard stroke cylinder of 75 stroke or 100 stroke respectively. Therefore, the dimensions are the same as those of 75 or 100 stroke cylinder. Width across flats K øI Hexagon width across...

Open the catalog to page 4

Compact Cylinder 10-CQ2B63 to 100, 11-CQ2B63 to 100 Rod end female thread 2-P (Rc, NPT, G) (Piping port) F H thread effective depth C 2-øN through 2 x 2-øO counterbore Note 1) Intermediate strokes of (55, 60, 65, 70) and (80, 85, 90, 95) can be manufactured by installing spacers (20, 15, 10, 5 mm) in a standard stroke cylinder of 75 stroke or 100 stroke respectively. Therefore, the dimensions are the same as those of 75 or 100 stroke cylinder. Rod end male thread 2-P (Rc, NPT, G) (Piping port) M5 (Relief port) Width across flats K Hexagon width across flats B1 Note 1) Intermediate strokes...

Open the catalog to page 5

10-CDQ2B63 to 100, 11-CDQ2B63 to 100 Rod end female thread 2-P (Rc, NPT, G) (Piping port) F H thread effective depth C 2-øN through Minimum lead wire bending radius 10 Auto switch D-A73, A80 Auto switch shown above is D-A73 type and D-A80 type. Z Stroke range Note 1) Note 1) Intermediate strokes of (55, 60, 65, 70) and (80, 85, 90, 95) can be manufactured by installing spacers (20, 15, 10, 5 mm) in a standard stroke cylinder of 75 stroke or 100 stroke respectively. Therefore, the dimensions are the same as those of 75 or 100 stroke cylinder. Rod end male thread 2-P (Rc, NPT, G) (Piping...

Open the catalog to page 6

Mounting Bolt for CQ2 Mounting bolt Mounting method: Mounting bolt for through-hole mounting style of CQ2 is available as an option. Ordering: Add the word “Bolt” in front of the bolts to be used. Example) Bolt M5 x 40 l, 2 pcs. Head side mounting style/Without auto switch Rod side mounting style/Without auto switch Model Mounting bolt Mounting bolt

Open the catalog to page 7

Mounting Bolt for CDQ2 Mounting bolt Mounting method: Mounting bolt for through-hole mounting style of CDQ2 is available as an option. Ordering: Add the word “Bolt” in front of the bolts to be used. Example) Bolt M5 x 50 l, 2 pcs. Rod side mounting style/Without auto switch Model Head side mounting style/Without auto switch Mounting bolt Mounting bolt

Open the catalog to page 8

M9B Number of auto switches Relief type Vacuum type Auto switch - Auto switch type Without auto switch With auto switch (Built-in magnet) (With auto switch) - Through-hole/Both ends tapped common (Standard) Without auto switch (Built-in magnet) ∗ For the applicable auto switch model, refer to page 10. ∗ Auto switches are shipped together, (but not assembled). Cylinder stroke (mm) ∗ Refer to the table below for the standard stroke. Standard (Rod end female thread) Rod end male thread Model Type Relief type Vacuum type Double acting Relief port Double acting, Single rod Suction flow (l/min...

Open the catalog to page 9

Auto Switch Specifications/Refer to Best Pneumatics catalogue for further information on auto switches and other applicable auto switches than listed. Type Reed switch Solid state 2-wire switch 3-wire Auto switch part no. D-A93 D-M9B D-M9N, D-M9P Load voltage 24 VDC, 100 VAC 24 VDC (10 to 28 VDC) 28 VDC or less Load current range 5 to 40 mA, 5 to 20 mA 2.5 to 40 mA 40 mA or less Indication light Applicable load Relay, PLC 24 VDC Relay, PLC IC circuit, Relay, PLC PLC: Programmable Logic Controller Proper Auto Switch Mounting Position (Detection at Stroke End) and Its Mounting Height D-A93...

Open the catalog to page 10