Catalogs >
SMC >
Colour Display Digital Pressure Switch

Colour Display Digital Pressure Switch
20Pages

Catalog excerpts

Colour Display Digital Pressure Switch - 1

2-Colour Display Digital Pressure Switch Stainless diaphragm Oil-free (Single-layer diaphragm structure) Stainless steel 630 Fitting parts: Stainless steel 304 Sensor parts: The sensor and fitting parts can be made to order with stainless steel 316L. 2-colour display Irregular value at a glance Choice of 2 piping directions Rear ported Bottom ported Rated pressure range 0.0 to –101.0 kPa and –0.100 to 2.00 MPa added to series Push Adjust to set-value with buttons. Push Finish setting RoHS compliant

Open the catalog to page 1

Colour Display Digital Pressure Switch - 2

b Sensor and fitting parts are electron-beam welded. b Choice of VCR® or Swagelok® fitting is available. Swagelok® compliant Confirmation of the atmospheric pressure of a load lock chamber Applicable Fluid Examples ∗ VCR® and Swagelok® are registered trademarks of Swagelok Company. fluid (JIS-K2 213) b Silicon oil (JIS-K2 213) b Lubricant (JIS-K6301) b Fluorocarbon dioxide b Air-containing drainage b Nitrogen Applications Confirmation of the adsorption of work pieces containing moisture Confirmation of the supply pressure of cleaning lines Confirmation of the working pressure of a hydraulic...

Open the catalog to page 2

Colour Display Digital Pressure Switch - 3

Can select from 4 indicator patterns of colour combinations. Rc1/8 (female threaded) is now available. (VCR® fitting compliant) (Swagelok® fitting compliant) Output display Analogue current output is newly added. It lights when OUT1 or OUT2 outputs. when it is wired a long distance away. is noise resistant.. Convex button is adopted and provides IP65 rating. Improved maneuverability and operability. open collector 1 output Lead wire length open collector 1 output Convex rubber button open collector 2 outputs open collector 2 outputs open collector 2 outputs + Analogue voltage...

Open the catalog to page 3

Colour Display Digital Pressure Switch - 4

2-Colour Display Digital Pressure Switch For General Fluids Series ZSE80/ISE80 How to Order Rated pressure range 80 –0.1 to 1 MPa 80H –0.1 to 2 MPa Made to Order Refer to Table 1 below. For vacuum/ compound pressure Rated pressure range 80 80F Note) Calibration Operating Note) Calibration Symbol Operating manual certificate Symbol manual certificate Rear ported Note) All texts in both English and Japanese With unit display switching function Fixed SI unit Note 2) Initial value PSI Note 1) Under the New Measurement Law, sales of switches with the unit switching function have not been allowed...

Open the catalog to page 4

Colour Display Digital Pressure Switch - 5

2-Colour Display Digital Pressure Switch For General Fluids (Vacuum pressure) (Compound pressure) (Positive pressure) (Positive pressure) Rated pressure range Withstand pressure Pressure sensor: Stainless steel 630, Fitting: Stainless steel 304 Wetted parts material Fluids do not corrode stainless steel 630 and 304 R1/4, NPT1/4, G1/4∗, URJ1/4, TSJ1/4, Rc1/8 Piping direction: Rear/Bottom Applicable fluid Port size 12 to 24 VDC ±10%, Ripple (p-p) 10% or less (with power supply polarity protection) Power supply voltage Current consumption NPN 1 output, NPN 2 outputs, PNP 1 output, PNP 2...

Open the catalog to page 5

Colour Display Digital Pressure Switch - 6

Series ZSE80/ISE80 Analogue Output Current output Analogue output [mA] Voltage output Range For vacuum pressure For compound pressure For positive pressure Rated pressure range Note) Analogue output is 0.8 [V] or 3.2 [mA] at pressure A. Descriptions LCD Output (OUT1) display (Orange) Lights up when OUT1 is turned ON. Output (OUT2) display (Orange) Displays the current pressure, set mode, selected display unit, and error code. Always use red or green display; or switch between green and red according to the output. Four different display settings are available. Lights up when OUT2 is turned...

Open the catalog to page 6

Colour Display Digital Pressure Switch - 7

2-Colour Display Digital Pressure Switch For General Fluids Internal Circuits and Wiring Examples -N Main circuit Main circuit Main circuit Max. 28V, 80 mA Residual voltage 1 V or less Max. 80 mA Residual voltage 1 V or less Max. 28V, 80 mA Residual voltage 1 V or less NPN (2 outputs) + Analogue voltage output NPN (2 outputs) + Auto-shift input Grey Analogue output Grey Auto-shift input + Black OUT1 Load – White OUT2 Main circuit Main circuit Main circuit Black OUT1 Load – White OUT2 Max. 80 mA Residual voltage 1 V or less Max. 28V, 80 mA Residual voltage 1 V or less Max. 28V, 80 mA...

Open the catalog to page 7

Colour Display Digital Pressure Switch - 8

Atmospheric vent port ø2.6 Piping port G1/4 Piping port Rc1/8

Open the catalog to page 8

Colour Display Digital Pressure Switch - 9

2-Color Display Digital Pressure Switch For General Fluids Atmospheric vent port ø2.6

Open the catalog to page 9

Colour Display Digital Pressure Switch - 10

Series ZSE80/ISE80 Dimensions With bracket (Rear ported) A With bracket (Rear ported) With bracket (Bottom por

Open the catalog to page 10

Colour Display Digital Pressure Switch - 11

2-Colour Display Digital Pressure Switch For General Fluids Dimensions Panel mount (Rear ported) Panel-cut dimensions

Open the catalog to page 11

Colour Display Digital Pressure Switch - 12

Series ZSE80/ISE80 Dimensions Panel mount (Bottom ported) Panel-cut dimensions

Open the catalog to page 12

Colour Display Digital Pressure Switch - 13

2-Colour Display Digital Pressure Switch For General Fluids F in brackets stand for the function codes. Refer to the operating manual for how to operate and function codes in detail. Function Details A Auto-shift function (F4) When there are large fluctuations in the supply pressure, the switch may fail to operate correctly. The auto-shift function compensates such supply pressure fluctuations. It measures the pressure at the time of auto-shift signal input and uses it as the reference pressure to correct the set-value on the switch. Auto-preset function, when selected in the initial...

Open the catalog to page 13

Colour Display Digital Pressure Switch - 14

Series ZSE80/ISE80 Function Details I Unit display switching function (F0) G Error indication function Display units can be switched with this function. Error name Error code Overcurrent error Residual pressure error Applied pressure error Auto-shift error Supply pressure exceeds the maximum set pressure. The value measured at the time of auto-shift input is outside the set pressure range. ∗ After displaying the error code for one second, the switch returns to the measuring mode. It is still applied with pressure that is ±10% over the atmospheric pressure and the upper limit of the rated...

Open the catalog to page 14

Colour Display Digital Pressure Switch - 15

Made to Order Please contact SMC for detailed dimensions, specifications, and lead times. 1 Wetted parts: Stainless steel 316L 2 Lead wire length 3 m This pressure switch has better corrosion resistance that uses stainless steel 316L for the wetted parts (pressure sensor and fitting). ∗ Refer to How to Order on page 1 for standard specifications. It has a lead wire extended to 3 meters. ∗ Refer to How to Order on page 1 for standard specifications. Option∗ Note 1) Not applicable to the rated pressure –0.1 to 2 MPa specifications (ISE80H). Note 2) A restrictor (equivalent to -X510) is...

Open the catalog to page 15