NAMUR Interface 5 Port Solenoid Valve Single solenoid Double solenoid Note 1) Use dry-air at low temperature. Note 2) Use turbine oil Classi (ISO VG32), if lubricated. Single solenoid NAMUR Interface—I Double solenoid Electrical entry Thread type Non-locking push type (Flush) Non-locking push type (Extended) Locking type (Tool required) '-• Light/Surge voltage suppressor With light/surge voltage suppressor With surge voltage suppressorNo,e' Note) Available for grommet type only.

NAMUR Interface 5 Port Solenoid Valve Single solenoid Double solenoid Note 1) Use dry-air at low temperature. Note 2) Use turbine oil Classi (ISO VG32), if lubricated. Single solenoid NAMUR Interface Double solenoid Electrical entry Thread type Manual override/Classification Non-locking push type (Flush) Non-locking push type (Extended) Locking type (Tool required) <-» Light/Surge voltage suppressor With light/surge voltage suppressor With surge voltage suppressor Note) Available for grommet type only.

NA MUR Interface 5 Port Solenoid Valve Series VFN2000N/3000N NAMUR Mounting Pattern with or without insert Axis A-A' can be aligned to suit. Coding stud. Solenoid valve flange face The solenoid valve can be attached with 2 mounting bolts. The positioning of the coding stud hole is left up to the manufacture and thus also determines the location of the coding stud.

Specific Product Precautions Be sure to read before handling. 1. When piping, please use I.D. equivalent to or larger than N.B. 2. Before piping, flush the system to remove dust, scale, chips, seal tape etc. in the pipe line both on the supply side (supply pressure port side) and secondary side (operation equipment port side). 3. For 3 position closed center, perfect check valve, check for leakage from piping and fittings in-between valve and cylinder by means of soapy water to ensure that there is no leakage. Also check the leakage from cylinder rod seal and piston seal. If there is any leakage,...