Improved pilot valve Pilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M2. •Flow Rate Characteristics

Rubber Seal 3 Port Solenoid Valve Type of actuation Voltage Electrical entry Option Manual Light/Surge override voltage suppressor For DC ■ With surge voltage suppressor ■ With light/surge voltage suppressor ■ Nonlocking push type ■ With light/surge voltage suppressor ■ Push-turn locking slotted type ■ Push-turn locking lever type Note) All AC voltage models have built-in surge voltage suppressor.

Manifold Variations

Rubber Seal 3 Port Pilot Solenoid Valve SYJ300 Series [Option] Specifications Fluid SymbolInternal pilot * Based on IEC60529 Note 1) Based on dynamic performance test, JIS B 8419: 2010. (Coil temperature: 20°C, at rated voltage, without surge voltage suppressor.) Note 2) Impact resistance: No malfunction occurred when it is tested in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Value in the initial state) Vibration resistance: No malfunction occurred in one sweep test between 45 and 2000 Hz....

Rubber Seal 3 Port Pilot Solenoid Valve STU3UU Series Flow Rate Characteristics/Weight Valve model Note) Value for DC. Add 1 g for AC. ( ): Without sub-plate. SYJ300R Pilot valve pressure is supplied separately from the main valve pressure through the use of a separate supply port. It can be used in the vacuum (up to -100 kPa) or low pressure line with 0.15 MPa or less. Note 1) For manifold base, refer to page 1166. Note 2) External pilot type body ported valves (SYJ3D2R) can only be used on the manifold.

C€ Note) CE-compliant: For DC only. [Option] Light/Surge voltage suppressor Rated voltage DC * For AC voltage valves there is no “S” option. It is already built-in to the rectifier circuit. * For type R, U, DC voltage is only available. * Power saving circuit is only available in the "Z" type. Bracket * For type WD, DC voltage is only available. Note) CE-compliant: For DC only. Body ported Base mounted SYJ3 1 2 SYJ3 1 4 * Bracket is mounted. * Brackets cannot be retrofitted. * External pilot type is not available. For sub-plate type, manifold type 41, S41 42, S42, 42R, S42R Body option • Nil:...

nuuuei Seal 3 Port Pilot Solenoid Valve SYUJUU beneS N.O. Component Parts Replacement Parts No. Note) Add suffix “-Q” for the CE-compliant product. How to Order Pilot Valve Assembly SYJ Note) Since V111 is CE-compliant as standard, the suffix "-Q” is not necessary.

SYJ300 Series Body Ported G: Approx. 300 H: Approx. 600 (Lead wire length) Manual override (Light/surge voltage suppressor) Approx. 300 (Lead wire length) Approx. 300 (Lead wire length)

Rubber Seal 3 Port Pilot Solenoid Valve Base Mounted (With Sub-plate) Manual override G: Approx. 300 H: Approx. 600 (Lead wire length) (Light/surge voltage suppressor) Approx. 300 (Lead wire length) Approx. 300 (Lead wire length) ∗ Refer to page 1217 for dime

ISYJ300 Series Manifold Specifications [Option] Manifold Specifications Model Note) Only for external pilot Flow Rate Characteristics Manifold Note) Value at manifold base mounted, 2 position single acting assembly) The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc.

Rubber Seal 3 Port Pilot Solenoid Valve Combinations of Solenoid Valve, Manifold Gasket and Manifold Base Blanking Plate Assembly Body ported (Type SYJ32(R)(-Q)) Base mounted (Type SYJ34(R)(-Q)) Round head combination screw SY100-33-3 (M1.7 x 17, Matt nickel plated) Round head combination screw SY100-33-3 (M1.7 x 17, Matt nickel plated) Round head combination screw Blanking plate Applicable base SS3YJ3-20(-Q) Manifold SS3YJ3-20R(-Q) base Manifold base Manifold base Note) Add suffix “-Q” for the CE-compliant product. Caution Mounting screw tightening torques M1.7: 0.12 N·m Use caution to the...

Manifold for Internal Pilot Type Note) CE-compliant: For DC only. Applicable solenoid valve SYJ312-nnnn-M3(-Q) SYJ312M-nnnn-M3(-Q) SYJ322-nnnn-M3(-Q) SYJ322M-nnnn-M3(-Q) Applicable blanking plate assembly Refer to page 1167. Note) For more than 10 stations, supply air to both sides of P port and exhaust air from both sides of R port. Type 42Type 42 Valve mounting direction P, R port thread type Rc G Applicable solenoid valve SYJ314R-nnnn(-Q) SYJ324R-nnnn(-Q) Applicable blanking plate assembly Refer to page 1167. Note) For more than 8 stations, supply/exhaust air to/from both sides of P port and...

Rubber Seal 3 Port Pilot Solenoid Valve Type 20 Manifold: Top Ported/SS3YJ3-20- Stations -00 (-F) L2 M3 x 0.5 (Bracket mounting screw) Manual override Approx. 300 (Lead wire length) (Light/surge voltage suppressor) Approx. 300 (Lead wire length) Approx. 300 (Lead wire length) ∗ Refer to page 1217 for dimensions with connector cable.

SYJ300 Series Type 41 Manifold: Side Ported/SS3YJ3-41- Stations -M3 Grommet (G) Type S41 Manifold: Side Ported (Pilot valve is on the A port side) / SS3YJ3-S41- Stations -M3 L1 Approx. 300 (Lead wire length) (Station n) Approx. 300 (Lead wire length) Approx. 300 (Lead wire length) Manual override Manual override 2 x ø3.5 (For mounting) Approx. 300 (Lead wire length) (Light/surge voltage suppressor) ∗ Refer to page 1217 for dimensions with connector cable.

Rubber Seal 3 Port Pilot Solenoid Valve Type 42 Manifold: Side Ported/SS3YJ3-42- Stations -M5, C4  N3 For C4  (Built-in One-touch fitting) One-touch fitting (A port) Applicable tubing O.D.: ø4, ø5/32" Approx. 300 (Lead wire length) Manual override Approx. 300 (Lead wire length) (Light/surge voltage suppressor) Approx. 300 (Lead wire length) ∗ Refer to page 1217 for dimensions with connector cable. Type S42 Manifold: Side Ported (Pilot valve is on the A port side) / SS3YJ3-S42- Stations -M5, C4  N3 (Light/surge voltage suppressor) (Light/surge voltage suppressor) -+ -+ One-touch fitting (A,...