*mydirectindustry

SY

Product catalog summary

Overview: The document provides comprehensive technical specifications and configurations for the SY3000, SY5000, and SY7000 series manifolds and valves. It covers manifold types, wiring systems, valve specifications, and actuation options, emphasizing flexibility and customization for industrial applications.

Manifold Types: Different manifold configurations are detailed, including Type 50 (Side Ported), Type 51 (Bottom Ported), and Type 52 (Top Ported), each with specific connector types like D-sub connectors and flat ribbon cables.

Wiring Specifications: The EX510 Gateway-type Serial Transmission System is highlighted, with specifications for various ported types and sub-plate specifications with M12 connectors. Wiring options include lead wire and terminal block box configurations.

Valve Specifications: Specifications for the SY3000, SY5000, and SY7000 series include fluid type, operating pressure ranges, temperature limits, and maximum operating frequency. Different seal types and actuation types are also specified.

Performance Parameters: Common conditions for valve operation are specified, such as pressure, piping length, load ratio, and stroke. Guidance is provided on selecting the appropriate cylinder speed and main valve seal type.

Valve Construction: Construction materials include zinc and aluminum die-casted components, special resin, and HNBR. The document describes valve construction for different porting options.

Additional Features: Information on valve weight, response time, and product precautions is included. A chart for optimum actuation size of air cylinders and the importance of using SMC Model Selection Software are highlighted.

Electrical Wiring Specifications: Specifications focus on the minimum bending radius of cables and lead wire configurations, with specific measurements provided.

Manifold and Valve Options: Detailed information on manifold and valve options for Series SY3000/5000/7000 is provided, including plug-in types, manifold exploded views, and one-touch fittings.

Ordering and Assembly Instructions: Instructions for ordering manifold assemblies and valves are provided, emphasizing the importance of selecting the correct power-saving circuit type for continuously energized valves.

Dimensions and Mounting Details: Dimensions for Series SY3000, SY5000, and SY7000 are provided, with specific measurements for different configurations and mounting options.

Key Notes and Recommendations: The document emphasizes specifying the correct layout on a manifold specification sheet and provides notes on avoiding interference with body or piping.

Specifications: The document outlines specifications for the SY3000/5000/7000 series manifolds, detailing configurations for various valve types and part numbers.

Procedures: Instructions for ordering manifolds and manifold assemblies are provided, including the need to specify arrangements on a manifold specification sheet.

Standards and Recommendations: Compatibility with common valve specifications is emphasized, along with selecting appropriate port sizes and configurations.

Key Data from Tables and Diagrams: Detailed dimensions for various configurations and mounting options are provided.

Critical Information: Key points include ensuring a match with valve specifications, ordering communication connectors separately, and selecting appropriate port sizes.

Best Practices: Consideration of actuation type, mounting screw type, and manual override options is advised when ordering.

Assembly Instructions: Instructions emphasize shutting off power and air supplies before disassembly and provide torque specifications for various components.

Component Details: Descriptions and part numbers for various components are provided, along with details on manifold block assembly and accessories.

Mounting and Configuration: Instructions for increasing connector type manifold stations and details on wiring types, port sizes, and piping directions are included.

Additional Notes: Cautionary notes on potential air leakage if assembly is not performed correctly are included.

Specifications: Part numbers for name plate and bracket assemblies are outlined, along with applicable tube outer diameters for one-touch fittings.

Assembly Procedures: Instructions emphasize the importance of shutting off power and air supplies before mounting assemblies.

Manual Override: Descriptions of manual override mechanisms and warnings about excessive torque are provided.

Environmental Considerations: Guidelines for using valves in corrosive environments and products with IP67 enclosures are provided.

Product Precautions: Specific precautions for back pressure check valves and exhaust throttles are outlined.

Key Recommendations: Proper assembly and tightening to prevent air leaks and the use of protective covers in harsh environments are recommended.

Electrical Connections: Details on electrical circuit diagrams for solenoid configurations and the importance of correct polarity and voltage levels are provided.

Power Saving Features: Valves are equipped with power-saving circuits to reduce power consumption, crucial for continuous energization applications.

Surge Voltage Protection: Recommendations for protecting against surge voltage intrusion are provided.

Mounting and Maintenance: Instructions for changing connector entry directions and replacing One-touch fittings are included, emphasizing proper tightening torque.

Handling Precautions: Cautions regarding the handling and installation of valves and manifolds are included.

Catalog excerpts

5 Port Solenoid Valve Plug-in Thanks to the flow increase, valve size can be reduced! Saves energy and space . SY3000 fittings are connectable. ∗ Type M10/M11 manifold Existing Valve Possible to drive cylinders ∗ Up to Possible to drive cylinders ∗ Up to Sub-plate newly added! Possible to drive cylinders ∗ Up to ∗ Values based on comparison with the existing SMC model. For details, refer to page 1. Power consumption ∗ Refer to Features 2. (With power saving circuit) New¡The SY7000 newly added ¡ Plug-in Sub-plate ¡With residual pressure release valve ¡With safety slide locking manual override ¡D-sub connector [IP67] manifold ¡PC wiring (with power supply terminal) manifold Rubber seal (Service life: 70 million cycles) Metal seal (Service life: 200 million cycles) ∗ According to SMC life test conditions

Open the catalog to page 1

5 Port Solenoid Valve Metal Base [IP40] Side ported From page 29 Bottom ported From page 29 Top ported From page 49 Connector Connecting Base [IP67 Note)] Note) Refer to page 77 for details on IP67. Manifold Side ported From page 81 Bottom ported From page 81 Compatible sub-plate type Connector type manifold Top ported From page 93 ¡IP67 enclosure in standard specifications ¡M12 waterproof connector type ensuring easy attaching/detaching and wiring ¡Applicable to the side, top and bottom ported. (4A, 2B port) Connector type manifold 32 outputs Wiring D-sub connector Lead wire Flat ribbon cable...

Open the catalog to page 2

Power saving Power consumption Applied voltage 0.1 w 0.35 w With power saving circuit Power consumption is reduced by power saving circuit. [Electrical power waveform with power saving circuit] Power consumption is decreased by approx. 1/3 by reducing the wattage required to hold the valve in an energized state. (Effective energizing time is over 67 ms at 24 VDC.) Refer to the electrical power waveform as shown on the left. 0V Standard With power saving circuit Space saving/Improved operability 4-position dual 3-port valve available Wiring, piping and operation are integrated on one side. Multiple...

Open the catalog to page 3

5 Port Solenoid Valve Improved safety Back pressure check valve This prevents actuator and air operated valve malfunctions caused by the exhaust from other valves.∗ Built-in valve type Back pressure check valve (Check seal) (A) (B) 4 2 Retrofit or pre-installed type If the product is affected by back pressure after installation, the back pressure check Page valve assembly can be added. ∗ For back pressure check valve precautions, refer to the Specific Product Precautions on page 243. Back pressure check valve assembly New With residual pressure release valve (Only SY5000) Indicator For residual...

Open the catalog to page 4

Improved safety New With safety slide locking manual override Double action manual override prevents incorrect operation! Double action operation Before operation The slide manual overrides cannot be turned ON with the safety slide cover. (OFF status: Locked) Operates the safety slide cover upward. (Unlocked) The slide manual overrides can be operated. Safety slide cover Slide manual overrides ∗ The safety slide cover cannot be locked when the slide manual override is turned ON. Visual check Red lines in three directions can be checked whether the safety slide cover is unlocked (FREE). Safety...

Open the catalog to page 5

5 Port Solenoid Valve Variations Wiring Top ported Bottom ported Side ported Top ported Bottom ported Side ported Metal Base Plug-in Plug-in Connector Connecting Base Plug-in Serial transmission Standard Option Made-to-Order (Refer to page 14.) D-sub connector Flat ribbon cable PC wiring Terminal block box Lead wire Circular connector M12 connector EX510 EX500 EX600 EX250 EX260 EX126 EX120 Positive common Negative common Blanking plate Individual SUP spacer Individual EXH spacer SUP stop valve spacer with residual pressure release valve Double check spacer with residual pressure release valve...

Open the catalog to page 6

Mixed fitting sizes External Individual External Pilot SUP Pilot External Individual External Pilot SUP Pilot External Individual External Pilot SUP Pilot Reverse pressure Different pressures External Individual External Pilot SUP Pilot — External Pilot — External Pilot Vacuum/Low pressure specification Elbow piping Note 1) Straight piping Straight piping Elbow piping Note 1) Elbow piping Note 1) Elbow piping Note 1) Elbow piping Note 1) Straight piping Straight piping Straight piping Oil resistant (Other than designated turbine oil) One-touch fittings Valve Options SY3000/5000 mixed mounting...

Open the catalog to page 7

Manifold Variations ············································ Features 5 Valve Replacement Parts ······································ Page 11 Optimum Actuation Size Chart of Air Cylinder ········· Page 1 With Residual Pressure Release Valve ················· Page 13 Valve Specifications ················································· Page 3 (Specifications, Response Time, Weight) Made-to-Order for Valve ········································ Page 14 Valve Construction ··················································· Page 7 Page 16 M12 connector Plug-in Sub-plate Specifications (M12...

Open the catalog to page 8

SY

SY

Catalog excerpts

All SMC PNEUMATIC catalogs and technical brochures

Archived catalogs