Vacuum Release Valve with Restrictor Plug-in Type Connector Connection D-sub Connector Flat Ribbon Cable Non Plug-in Type Individual Wiring Individual Wiring

Vacuum Release Valve with Restrictor Common Specifications Vacuum Release X pressure port pressure port Response Time Manifold Valve Specifications Note 1 ) Can be used with positive pressure to suit the application. Note 2) Please use with pilot X port pressure equal to or higher than the release port 1 (P) pressure. Note 3) Impact resistance: No malfunction occurred when it is tested in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction...

Vacuum Release Valve with Restrictor Series Release pressure side filter Component Parts Note) Set the operating torque of the restrictor of the restrictor block assembly Component Parts Vacuum pressure side fllter_ <FMter replacement instructions> If there are situations such as filter clogging, a drop In suction force, or slow re- sponse time, stop operation and replace the filter. 1. Using a precision driver, remove the filter assembly (© or ®) from the main 2. Turn the filter guide by hand and remove. 3. Replace the filter (© or ©) and gently hand tighten the filter guide. At this time, check...

Connector Type Vacuum Release Valve with Restrictor • Vacuum release valve manifold with restrictor Vacuum release valve with restrictor type Connector type Note) Refer to pages 26, 42, 50, and 58 for details. Connector entry With parallel wiring specifications, it is necessary to select the connector entry direction (1: upward, 2: lateral). (Only upward is available for GD.) For details, refer to pages 26 and 42. How to Order Valve Manifold Assembly_ Individual wiring/lead wire length 300 mm, with plug (24 VDC) With switch, plug (24 VDC) Non-polar type, with plug (24 VDC) SUP/EXH block (D side...

Connector Type Vacuum Release Valve with Restrictor How to Order Solenoid Valves (3 Position 3 Port with Restrictor) With switch Individual wiring [For plug-in mixed mounting] "* Note 1 ) Refer to pages 90 and 91 for the dedicated non-plug-in individual Coil spec. ■ Be sure to select "with power saving circuit" when the solenoid valve will be energized continuously for long period. Rated voltage* manifolds compatible with serial Connector entry C: Dedicated for centralized wiring M: Individual wiring, With lead wire MN: Individual wiring, Without lead wire (With connector, socket) MO: Individual...

P0011-P0100-E.qxd 08.9.1 1:54 PM Page 88 Series SJ3A6 Dimensions One-touch fitting (X: External pilot port) Applicable tubing O.D: ø4, ø5/32" (9.1) (L4) Switch for locking a connector 46.5 (with plug) 43.5 F2 vacuum pressure side Filter body assembly With plug D side With slotted locking needle type (8) 1 F1 L3 8 F1 release pressure side Filter body assembly Connector entry upward M5 x 0.8 (with plug) [PS pressure detection port] U side 59.8 52 1 F1 One-touch fitting [PE: Pilot EXH port] Applicable tubing O.D: ø4, ø5/32" F1 6.2 F1 20.5 F1 One-touch fitting [1(P) release pressure port] Applicable...

Individual Wiring Vacuum Release Valve with Restrictor • Individual wiring manifold Vacuum release valve with restrictor type Valve stations SUP/EXH block mounting position DIN rail length specified t Specify the valve stations not exceeding SUP/EXH block fitting spec. t Specify the required specifications (Includ- ing port sizes other than 08) by means of the manifold specification sheet. How to Order Valve Manifold Assembly « There is no need to enter anything when the SUP/EXH block mounting position "M" is selec- ted. Also, this manifold comes standard with ex- ternal pilot specifications....

Vacuum Release Valve with Restrictor O0/76S Ol/v/lO How to Order Solenoid Valves (3 Position 3 Port with Restrictor) Coil spec. ■ Be sure to select "with power saving circuit" when the solenoid valve will be energized continuously for long period. Rated voltage Connector entry M: Individual wiring, With lead wire MN: Individual wiring, Without lead wire (With connector, socket) MO: Individual wiring, Without < When ordering a connector assembly sep- arately, refer to page 99. With light/surge voltage suppressor Needle operation Manual override Nil: Non-locking push type slotted type

P0011-P0100-E.qxd 08.9.1 1:54 PM Page 92 Series SJ3A6 Dimensions SS3J3-V60- Stations U/D/B One-touch fitting (X: External pilot port) Applicable tubing O.D: ø4, ø5/32" F1 release pressure side Filter body assembly M5 x 0.8 (with plug) [PS pressure detection port] 46.5 (with plug) (L4) 8 When with-plug is selected. When slotted locking needle type is selected. When manual needle type is selected. 43.5 56.2 (3) 17.2 10 20.8 1 L3 PE X AB AB AB AB Manual override (Locking type: Press, then rotate.) 4(A) port side: Blue 2(B) port side: Yellow L2 Approx. 300 (Lead wire length) DIN rail holding screw...

Vacuum Release Valve with Restrictor Manifold Exploded View Type V60P (Vacuum release valve with restrictor) manifold Note) Refer to page 66 for "How to Add Manifold Stations." Integrated type (for output) serial transmission system) manifold PC wiring with power supply terminal) manifold Component Parts / Plug-in Connector Block Assembly Part No. Note) SI unit is not included. Component Parts / Non-plug-in Note 1) For the SJ3A6 series, valve block and manual switches are not available. Note 2) The valves cannot be operated only with the SUP/EXH block assembly for different pressure, select in...

Specific Product Precautions 1 Be sure to read before handling. Refer to front matters 58 and 59 for Safety Instructions and pages 3 to 7 for 3/4/5 Port Solenoid Valve Precautions. Manual Override Switch Operation For manual override operation, move the manual override switch to a position where letters A and B can be seen. [Manual override switch release status (refer to the figure below)] Operation with the manual override switch in a locked status can cause damage to the manual override and air leakage, so be sure to release the manual override switch before use. After manual override opera-...