SMC Corporation Akihabara UDX 15F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, JAPAN http://www.smcworld.com Information ©2012 SMC Corporation All Rights Reserved 12-E585 D-SZ Printing QW 8150SZ Electric Actuator/Slider Type Belt Drive AC Servo Specification Series LEFB RoHS Added AC servo specification to the belt drive type! Max. speed: 2000 mm/s Max. stroke: 3000 mm Max. acceleration/deceleration: 20000 mm/s2 Added motor bottom mounting type Application Example Series LEFB Workpiece Workpiece does not interfere with the motor Variations Belt drive LEFB Size Stroke [mm] Work load [kg] Horizontal Speed [mm/s] 25 300 to 2000 5 2000 32 300 to 2500 15 2000 40 Series 300 to 3000 25 2000 Positioning repeatability [mm] 0.08 Offering 4 types of driver Incremental Type Pulse input type/ Positioning type Series LECSA Absolute Type Pulse input type Series LECSB CC-Link direct input type Series LECSC SSCNET III type Series LECSS 1

Electric Actuator/Slider Type Belt Drive AC Servo Specification/Series LEFB Model Selection Selection Procedure Check the work load-speed. Check the cycle time. Check the allowable moment. Selection Example- 1 Mounting orientation: Horizontal upward Workpiece mounting condition: Check the work load-speed. <Speed-Work load graph> (Page 3) Select the target model based on the workpiece mass and speed with reference to the <Speed-Work load graph>. Selection example) The LEFB40S4S-2000 is temporarily selected based on the graph shown on the right side. Check the cycle time. Calculate the cycle time...

Model Selection Series LcrD Speed-Work Load Graph (Guide) LEFBD/Belt Drive Area where the regeneration option is required. ■ The shaded area in the graph requires the regeneration option (LEC-MR-RB032) Cycle Time Graph (Guide) LEFBD/Belt Drive * Cycle time is for when maximum speed. Work Load-Acceleration/Deceleration Graph (Guide) LEFBD/Belt Drive: Horizontal_

Series LEFB Dynamic Allowable Moment Load overhanging direction Me: Dynamic allowable moment [Nm] L: Overhang to the work load center of gravity [mm]

Model Selection Series LcrD Table Accuracy Table Displacement (Reference Value) Note) Traveling parallelism does not include the mounting surface Note) This displacement is measured when a 15 mm aluminum plate is mounted and fixed on the table.

Electric Actuator/Slider Type Belt Drive AC Servo Specification Series LEFB Motor mounting positionn Equivalent lead * Refer to the applicable stroke table. Motor option Motor type : For motor type S2 and S6, the compatible driver part number suffixes are Applicable stroke table Driver type "Cable length The length of the motor, encoder and lock Cable type * The motor and encoder cables are included. (The lock cable is included when the motor with lock option is selected.) •Standard/OProduced upon receipt of order

Electric Actuator/Slider Type _ a CCD Belt Drive AC Servo Specification o6f/6S LElD Compatible Drivers Refer to the SMC Information (11-E579) for details. Note 1) For positioning type, setting needs to be changed to use with maximum set values. Setup software (MR Configurator) LEC-MR-SETUP221 is required. Note 2) Available when the Mitsubishi motion controller is used for the master equipment.

Series LEFB Specifications LEFB25, 32, 40 AC Servo Motor (100/200/400 W) LEFB25 LEFB32 LEFB40 9 Model Belt width Belt pitch [mm] Deceleration ratio Equivalent lead [mm] Max. work load [kg] Max. speed [mm/s] Max. acceleration/deceleration [mm/s2] Positioning repeatability [mm] Max. stroke [mm] Motor capacity [W] Dimensions [mm] Width Height (Guide) Overall length includes full stroke. Overall length 15 3 1/1 54 15 2,000 20,000 0.08 2,500 200 70 60 Stroke + 290 20 5 2,000 100 58 48 Stroke + 252 25 3,000 400 90 68 Stroke + 341.5 Weight LEFB25S S Series Stroke [mm] 300 Product weight [kg] 3.00 Additional...

Electric Actuator/Slider Type _ Belt Drive AC Servo Specification SOflOS * Motor bottom mounting type is the same. Component Parts Component Parts

Series LEFB Construction LEFB32/40S S A A A-A Motor bottom mounting type is the same. Component Parts No. Description Component Parts Material Note No. Material Note Aluminum alloy Anodized 15 Return flange Description Aluminum alloy Coating Coating 1 Body 2 Rail guide 16 Housing Aluminum alloy 3 Belt 17 Motor mount Aluminum alloy Coating 4 Belt holder 5 6 Carbon steel Chromate treated 18 Motor cover Aluminum alloy Anodized Belt stopper Aluminum alloy Anodized 19 Motor end cover Aluminum alloy Anodized Table Aluminum alloy Anodized 20 Band stopper Stainless steel 7 Blanking plate Aluminum alloy...