kj mm
1 / 9Pages

Catalog excerpts

Miniature One-touch Fittings One-touch Mini Series KJ ø4, ø6 Applicable Tubing: ø2, ø3.2, Release button (Light gray) Guide 1 Guide 2 Chuck Light force for removal When the fitting is removed from the tubing, the chuck and collet are released, thus preventing them from biting into the tube to an unnecessary degree. Unique shape allows easy tube release. Suitable for use with nylon, soft nylon and urethane. Large retaining force. The chuck provides a secure bite, while retaining force is increased. Seal Can be used for a wide range of pressures from a low vacuum up to a pressure of 1 MPa. Tube Body (White) O-ring The use of a special profile ensures sealing and reduces resistance when the tube is inserted. Stud Effective when piping in a confined space. • The body and the threaded portion can rotate (for positioning to some extent). • Stud is electroless nickel plated. • Standard with preapplied sealant for R 1/8 thread Optimum piping in less space with 20% reduction of the outside diameter. Thread with sealant is standard. Copper-free specifications (With electroless nickel plated.) Possible to use in vacuum to –100 kPa. Applicable Tubing FEP, PFA, Nylon, Soft nylon(1), Polyurethane ø2, ø3.2, ø4, ø6 Tubing material Tubing O.D. Note 1) Soft nylon tubing is not compatible with water. Specifications Fluid Operating pressure range (3) Proof pressure Ambient and fluid temperature Thread Mounting section Nut section Seal on the threads (Standard) Copper-free (Standard) Air/Water (2) –100 kPa to 1 MPa 3 MPa –5 to 60°C, Water: 0 to 40°C (No freezing) JIS B0203 (Taper thread for piping), JIS B0205 (Metric coarse thread) JIS B0205 (Metric fine thread) With sealant Brass parts are all electroless nickel plated. Note 2) The surge pressure must be under the maximum operating pressure. Note 3) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage. Principal Parts Material Body Stud Chuck, Guide 2 Release button Seal, O-ring Gasket Guide, Guide 1 Guide for ø2 Made to Order (Refer to page 26 for details.) Stainless steel 303, C3604, PBT C3604 (Thread portion) Stainless steel 304 POM NBR PVC, Stainless steel 304, NBR PBT C3604

Open the catalog to page 1

Miniature One-touch Fitting Model Hex. socket head male connector KJS Internal hex. allows thread connection by using an allen wrench for confined spaces. Use to connect tubes through a panel. Extended male elbow KJW Universal male elbow allows thread connection by using a socket wrench for confined spaces. Use to pipe in the same direction from female thread. Most general style. Use to pipe from male thread such as pressure gauge. Plug-in elbow Use to change by 90° in a tube fetching direction from Onetouch fittings. Use to change by 90° in a tube fetching direction from One-touch fittings...

Open the catalog to page 2

Male Connector: KJH Applicable Applicable tubing Applicable tubing ∗ Reference dimensions after R thread installation. (With sealant) Hexagon Socket Head Male Connector: KJS H Applicable Connection Note) (width Applicable tubing Applicable tubing ∗ Reference dimensions after R thread installation. Note) øD: Max. diameter Female Connector: KJF Applicable Connection tubing O.D. thread (mm) T M3 x 0.5 3.2 M5 x 0.8 M3 x 0.5 4 M5 x 0.8 6 M5 x 0.8 H Note) (width øD across flats) Applicable tubing Straight Union: KJH Applicable tubing O.D. (mm) 2 3.2 4 6

Open the catalog to page 3

Miniature One-touch Fitting Different Diameter Straight: KJH Applicable tubing O.D. (mm) 2 3.2 4 Applicable tubing Male Elbow: KJL Applicable H Note) (width across øD flats) 5.5 6 7 ∗ Reference dimensions after R thread installation. Note) øD: Max. diameter Applicable tubing (With sealant) Union Elbow: KJL Applicable tubing O.D. (mm) 3.2 4 6 Applicable tubing Plug-in Elbow: KJL Applicable Applicable tubing O.D. fitting size (mm) ød 3.2 3.2 4 4 6 6 Mass (g) 1 1.2 2 Applicable tubing Applicable fitting

Open the catalog to page 4

Reducer Elbow: KJL Applicable Applicable tubing O.D. fitting size (mm) ød 4 3.2 6 4 6 Note) øD1: Max. diameter Applicable tubing Applicable fitting Extended Male Elbow: KJW Applicable Connection tubing O.D. (mm) 2 3.2 Applicable tubing ∗ Reference dimensions after R thread installation. Note) øD: Max. diameter Applicable tubing (With sealant) Male Branch Tee: KJT Applicable Connection tubing O.D. (mm) 2 3.2 ∗ Reference dimensions after R thread installation. Note) øD: Max. diameter (With sealant)

Open the catalog to page 5

Miniature One-touch Fitting Union Tee: KJT Applicable tubing O.D. (mm) 2 3.2 4 6 Different Diameter Tee: KJT Applicable tubing O.D. (mm) Applicable tubing Male Run Tee: KJY Applicable tubing O.D. (mm) 2 3.2 Applicable tubing H Note) (width øD L1 across flats) 5.5 6 10 7 7 Applicable tubing ∗ Reference dimensions after R thread installation. Note) øD: Max. diameter (With sealant)

Open the catalog to page 6

Union “Y”: KJU Applicable tubing O.D. (mm) 2 3.2 4 6 Different Diameter Union “Y”: KJU Applicable tubing O.D. (mm) Plug-in “Y”: KJU Applicable Applicable tubing O.D. fitting size (mm) ød 3.2 3.2 4 4 6 6 Applicable fitting Different Diameter Plug-in “Y”: KJX Applicable Applicable tubing O.D. fitting size (mm) ød 3.2 4 4 6 Applicable fitting

Open the catalog to page 7

Miniature One-touch Fitting H Note) (width across øD1 øD2 flats) ∗ Reference dimensions after R thread installation. Note) øD1: Max. diameter (With sealant) Plug-in Reducer: KJR Applicable Applicable tubing O.D. fitting size (mm) ød 2 4 4 3.2 6 6 4 Applicable tubing Applicable fitting Bulkhead Union: KJE Applicable tubing O.D. (mm) 2 3.2 4 6 H (width across flats) 9 10 11 14 Mounting hole Mounting plate thickness 6 mm or less Applicable fitting size ød

Open the catalog to page 8

Made to Order Specifications Please contact SMC for detailed dimensions, specifications, and delivery. 1 Grease-free Specifications Symbol Grease-free Rubber material: NBR (With fluorine coating) Release button color: Light blue Grease-free Rubber material: NBR (With fluorine coating) Release button color: Light blue Clean (Copper-free, air blow, double package) Grease-free Rubber material: FKM (With fluorine coating) Release button color: Light blue Suffix “-X17” to the end of part number. Example) KJH06-01S-X17 2 Other Specifications Symbol Specifications Lubricant: White Vaseline Release...

Open the catalog to page 9