Rotary Actuator Vane Type Standard Type Free Mount Type Many combinations available! Standard type/Series CRB2 ¡Piping ports are located on the flat surface. Fittings can be secured firmly, piping is also improved. Flat surface ¡Many variations of shaft-end shape (6 types) Piping port Shaft-end shape With angle adjuster unit With auto switch unit With angle adjuster unit With auto switch unit Possible to adjust the angle as desired Rotating angle Rotating angle adjustment range 270° 90° Auto switch unit Angle adjuster unit Free mount type/Series CRBU2 is added. ¡12% weight reduction ¡Possible to move the plate mounting position as desired ¡Many mounting variations Vertical mounting Lateral mounting With angle adjuster unit With auto switch unit With angle adjuster unit With auto switch unit Rotating angle: 90°, 180°, 270° All series can rotate up to 270°. Interchangeable mounting pitch with the existing model The use of specially designed seals and stoppers now enables our compact vane type rotary actuators to rotate up to 270°. (Single vane type) Mounting pitches A to C shown on the right and D mounting hole diameters are interchangeable with the existing model. D: Height is reduced compared to the existing model. Mounting hole

Shaft type variations Six shaft options available (∗ The figures below show size 30 actuators.) Single shaft Single flat Double shaft Double shaft Double shaft Round shaft Single flat Single flat Single flat Round shaft Single shaft Round shaft Round shaft Double shaft Single flat Single flat Direct mounting The rotary actuator body can be mounted directly. ∗ Not possible for size 10 to 40 with unit(s) The mounting position of the auto switch can be set freely. The switch can be fixed in the desired position in the circumferential direction. Side ported Axial ported Connecting port location:...

Rotary Actuator/Vane Type Possible to change the starting position as desired to suit the installation conditions. Conventional: 4 directions → 8 directions Starting point Rotation range Rotation range Starting point New Starting point Port surface Port surface Rotation range Port surface Port surface Rotation range Starting point Port surface Starting point Starting point (Single flat) Port surface Port surface Rotation range Rotation range Port surface Starting point Port surface Starting point Starting point ∗ For single vane 90° 4 directions are used for size 10. Rotation range Rotation range...

Rotary Actuator/Vane Type Series CRB2 /CRBU2 Free mount type With auto switch Axial ported Axial ported Axial ported Axial ported Axial ported Side ported (Nil) Axial ported (E) Side ported Port location Side ported S : Single vane D: Double vane Side ported Vane type Simple Specials Double shaft Long shaft with round shaft & Short shaft with single flat Same length double long shaft with single flat on both shafts Single shaft With Auto Switch Angle Adjustment Component Unit Setting Rotating angle With auto switch Shaft type With auto switch With auto switch Standard/Free mount type Free mount...

Rotary Actuator Vane Type With auto switch q With auto switch Symbol Shaft type w Mounting Mounting Basic type Flange type Single shaft Double shaft Double shaft Double shaft Single shaft Double shaft r Size Shaft-end shape Long shaft Short shaft Single flat* — Single flat* Single flat Round shaft Single flat Round shaft Round shaft Round shaft — Single flat* Long shaft with single flat * t Rotating angle y Vane type S D !0 Number of auto switches 1 pc.* 2 pcs.** * S: A right-hand auto switch is shipped. ** il: A right-hand switch and a left-hand N switch are shipped. Side ported Axial ported...

Rotary Actuator Vane Type Single Vane Specifications Flange Assembly Part No. (For details, refer to page 12.) Model Note 1) ake sure to operate within the speed regulation range. Exceeding the maximum speed M (0.3 sec/90°) can cause the unit to stick or not operate. Note 2) he upper numbers in this section in the table indicate the energy factor when the rubber T bumper is used (at the end of the rotation), and the lower numbers indicate the energy factor when the rubber bumper is not used. Note 3) Adjustment range in the table is for 270°. For 90° and 180°, refer to page 14. (For details, refer...

Series CRB2 Effective Output Size 15 Reference Screw Size Dimension “L” of the actuators is provided in the table below for JIS standard hexagon socket head cap screws. If these types of screw are used, their heads will fit in the mounting hole. Direct Mounting of Body * nly the size 10 actuators have different L O dimensions for single and double vane. Double vane: L = 20.5 * Refer to page 7 for Q1 and Q2 dimensions. Chamfered Position and Rotation Range: Top View from Long Shaft Side Chamfered positions shown below illustrate the conditions of actuators when B port is pressurized. Single vane...

Rotary Actuator Vane Type Construction ¡ igures for 90° and 180° show the condition of the actuators when B port is pressurized, F and the figure for 270° shows the position of the ports during rotation. (Viewed from the output shaft side) Single vane (Viewed from the output shaft side) (Viewed from the output shaft side) (Output shaft) !1 Internal rubber bumper (Not applicable to size 10) i Single shaft type (Short shaft side) Double shaft type Double vane Size: 10 Component Parts (Long shaft side) Description Material Body (A) Aluminum alloy Body (B) Aluminum alloy Vane shaft Stainless steel*...

Series CRB2 Construction (With Auto Switch) Single vane (The unit is common for single vane type and double vane type.) Following figures show actuators for 90° and 180° when B port is pressurized. Double vane Following figures show the intermediate rotation position when A or B port is pressurized. Description Cover (A) Cover (B) Magnet lever Holding block Holding block (B) Switch block (A) Switch block (B) Switch block Magnet Material Resin Resin Resin Stainless steel Aluminum alloy Resin Resin Resin Description Hexagon socket head set screw Cross recessed round head screw Cross recessed round...