Liquid Collector Ejector Type Resource Saving/Labor Saving Collects and reuses leaked fluids such as valuable cutting oil and grinding oil Specifications Collects leaked fluids such as valuable cutting oil and grinding oil. This equipment collects cutting oil and grinding oil that sticks to and leaks from pumps or processed materials, shavings, etc. Model Fluid Collected fluid Minimum Operating pressure Collected flow rate L/min Port size∗ No need for workers to carry out tasks such as collecting fluid. Freedom from the troublesome task of collecting leaked fluid. IN Liquid collector OUT Leaked fluid suction inlet Strainer Strainer filtration This equipment is compact, uses minimal space, and not only are mounting and operation simple, but also maintenance is not needed. Can be driven by an alreadyinstalled pump Already-installed pumps can power these collectors. There is no need to provide a fresh source of energy. Liquid collector Strainer Compact – easy mounting and operation Liquid collector Strainer HEP500-04 Water-soluble Cutting oil/Grinding oil Non-water soluble Cutting oil/Grinding oil 20 kPa or more (0.02 MPa or more) 0.8 to 2.7 0.01 to 1 1/2 (Female thread) Nylon tube ø12/ø9 With fitting (H06-01) With fitting (H06-02) 60 mesh gauze Brass, Electroless Ni-P alloy plated Cast iron, Electroless Ni-P alloy plated 500 gf 200 gf *Use nylon tube T0645 to connect the liquid collector with the strainer. Liquid leaked from pump Liquid leaked during cutting Processed object Liquid stuck to processed object and leaked Liquid stuck to shavings and leaked

Collected flow rate L/min Collected flow rate L/min Non-water soluble cutting oil: Dynamic viscosity 50cSt Operating pressure and operating flow rate Operating flow rate L/min Non-water soluble cutting oil: Dynamic viscosity 20cSt Collected flow rate L/min Diluted water-soluble cutting oil Conditions: 1. Lifting range 1m 2. Collection tube (T0645) length Working Principle Dimensions Width across flats 27 Leaked liquid suction inlet Operating fluid Throat part Defuser part When the operating fluid is released from the IN side (nozzle, throat part, defuser part) at or above a certain flow rate,...