Liquid Collector Exhaust Pressure Type Resource Saving/Energy Saving/Labor Saving Uses exhaust pressure to collect and reuse leaked lubricant and hydraulic fluid Specifications Resource Saving/Collects leaked lubricant and hydraulic fluid These collectors help prevent waste by collecting valuable hydraulic fluid and lubricant that has leaked and built up in the vicinity of the machinery. Energy Saving/Driven by exhaust pressure These collectors save energy by employing the exhaust air from the switching valve, which would otherwise be simply released into the atmosphere. Labor Saving/No need for workers to collect fluid Model Collected fluid Fluid Operating pressure Fluid temperature Collected fluid temperature Collected fluid discharge volume AEP100-02 Hydraulic fluid / Lubricant Air 200 to 700 kPa (0.2 to 0.7 MPa) 5 to 60 C 5 to 60 C 10 m L/one time (at 0.5 MPa) Collected fluid lifting range Exhaust port effective area Port size These collectors contribute to efficiency by eliminating the need for workers to carry out tasks such as collecting fluid and wiping down machinery.

AEP100-02 Operating Conditions Bore size Cylinder Working Principle Piston speed 100 mm/s or more Tubing length on IN side Circuit Example Nylon tube ø6/4.5 Max. length 10 m ø8/6 Max. length 5 m Silencer AN20-02 Tank When the exhaust pressure from the switching valve enters into port u, the piston i and diaphragm y compress and displace spring r, the exhaust pressure is released into the atmosphere from exhaust port o, and at the same time the diaphragm is returned to its original condition by the recovery power of the spring. At this time, the diaphragm interior !0 is under negative pressure,...