High-Precision Digital Pressure Switch Settings can be copied to up to 10 slave sensors at once. The settings of the master sensor can be copied to the slave sensors. • Reduced setting efforts • Reduced chance of set-value input error Master Slave -> Unit 1 Unit 2 [ Finish setting Added vacuum range. Rated pressure range: 0.0 to -101.0 kPa Expanded pressure range Rated pressure range: -0.100 to 1.000 MPa NPN or PNP open collector 2 outputs NPN or PNP open collector 1 output + Analog output

% Replaceable One-touch fittings Bracket configuration allows mounting in four orientations. Panel mount Mountable side by side without clearance The clip type allows easy removal of fittings. Fitting's type and size can be changed. • Lead wire Added the connector cover. Connector cover 4-digit display allows easy reading of displayed values. asMC PRESSURE Possible to check set-value during Series 5 ZSE30A (vacuum) ¿ZSE30AF (compound)^ ISE30A (positive) OSHC PRESSURE Rated pressure range Minimum unit setting NPN or PNP open collector 1 output NPN or PNP open collector 2 outputs NPN or PNP open...

Digital Pressure Switch Rated pressure range compound pressure Rated pressure ranged One-touch fitting 04 mm, 05/32 inch One-touch fitting 0I/4 Inch One-touch fitting 04 mm, 05/32 Inch One-touch fitting 0I/4 Inch Display unit* Note 1) Under the New Measure- ment Law, sales of switches with the unit switching func- tion have not been allowed Note 2) Fixed unit kPa, MPa pre-wired connector Available only for output "A" or "B". Without lead wire Lead wire with connector (Lead wire length 2 m) No,e> Lead wire with connector (Lead wire length 2 m) Nole> With connector cover Connector cover Note) For...

Note 1) If applied pressure fluctuates near the set value, set the hysteresis above the fluctuation range to prevent chattering. Note 2) When analog voltage output is selected, analog current output cannot be used together. Note 3) When analog current output is selected, analog voltage output cannot be used together. Piping Specifications When optional parts are required separately, use the following part numbers to place an order.

High-Precision Digital Pressure Switch Analog Output Voltage output Current output Unit display Displays present unit (only for units of kPa and Output (OUT1) display (Green) Lights up when switch output (OUT1) is turned ON. Use this button to select the mode or increase the ON/OFF set-value. It is also used for switching to the peak display Use this button to change the mode or confirm the Functions (Refer to pages 10 and 11 for details.) Displays the current pressure, set mode, and error code. Always use red or green display; or switch between green and red according to the output. Four different...

Internal Circuits and Wiring Examples Residual voltage 1 V or less Residual voltage 1 V or less Residual voltage 1 V or less Residual voltage 1 V or less * The FUNC terminal Is connected using a dedicated lead wire (ZS-38-5L or ZS-38-U) when the copy function is used. (Refer to "Copy function" on page 10.)

High-Precision Digital Pressure Switch NPN (1 output) + Analog voltage output Residual voltage 1 V or less Analog voltage output Output impedance: Approx. 1 kQ PNP (1 output) + Analog voltage output Residual voltage 1 V or less Analog voltage output Output impedance: Approx. 1 kQ NPN (1 output) + Analog current output Residual voltage 1 V or less Analog current output Power supply voltage 12 V: 300 Q. Power supply voltage 24 V: 600 Q. PNP (1 output) + Analog current output Residual voltage 1 V or less Analog current output Power supply voltage 12 V: 300 a Power supply voltage 24 V: 600 Q * The...

One-touch fitting o1/4 inch One-touch fitting o1/4 inch

High-Precision Digital Pressure Switch Series ZSE30A(F)/ISE30A With bracket (Option unit part no.: ZS-38-A1) (Option unit part no.: ZS-38-A2) (Option unit part no.: ZS-38-A3) : Bracket configuration allows mounting : Bracket configuration allows mounting

Panel mount Panel mount adapter (Option unit part no.: ZS-27-C) Panel mount adapter + Front protection cover (Option unit part no.: ZS-27-D)

2-Color Display High-Precision Digital Pressure Switch Series ZSE30A(F)/ISE30A Panel-cut dimensions 1 pc. mounting Multiple (2 pcs. or more) horizontal mounting 0 31 –0.4 0 31 –0.4 0 31 –0.4 31 x n pcs. + 3.5 x (n pcs. – 1) x R2 R2 or or le s les ss Multiple (2 pcs. or more) vertical mounting 0 31 –0.4 24 or more 31 x n pcs. + 3.5 x (n pcs. – 1) 4x 24 or more 4 4 x R2 or le ss 9

Function Details The settings of the master sensor can be copied to the slave sensors. It is to reduce the time taken for setting and prevent the input of wrong values. Settings can be copied to up to 10 slave sensors at once. Unit! Unit 2 Unit 10 Slave-side sensor 1) The sensors are connected by a dedicated lead wire master and up to 10 slaves)). Copying is performed through a dedicated communication line. 2) Make the slave sensor which needs to be the master into the master by button operation. (Initially all sensors are 3) Press the [~S~l button on the master sensor to start copy- Auto-preset...

High-Precision Digital Pressure Switch FD in brackets stand for the function codes. Refer to the operating manual for how to operate and function codes in detail. Error indication function If the switch will not recover to normal even after all of the above-mentioned solutions have been applied, consult SMC for investigation. Available response time settings A large bore cylinder or ejector consumes a large volume of air in operation and may ex- perience a temporary drop in the supply pressure. This function prevents detection of such temporary drops in the supply pressure as an error. This function...

Please contact SMC for detailed dimensions, specifications, and lead times. IM12 4-pin pre-wired connector (Lead wire length 100 mm) Output specifications A: NPN open collector 2 outputs B: PNP open collector 2 outputs Option cable