Compact Pressure Switch Series ZSE1/ISE1 For Vacuum For Positive Pressure ZSE ISE For General Pneumatics PSE Z I SE3 PS Z I SE 1 2 ZSP ISA2 IS ZSM PF2 IF Data Can be integrated with ZM ejector system. Variable hysteresis 1 to 10% of set pressure (Variable) Easy and simple wiring 16-6-1

Series ZSE1/ISE1 How to Order Operating pressure range/ Setting pressure range Nil L Piping specifications 01 T1 0 to 1 MPa 0 to 100 kPa R 1/8 NPTF 1/8 Note) M5 x 0.8 (female) threaded. Positive pressure ISE1 Vacuum ZSE1 Piping specifications Wiring specifications Grommet type (Lead wire: 0.6 m) 00 For mounting on ZM ejector Nil 01 Single mounting R 1/8 L Grommet type (Lead wire: 3 m) T1 Single mounting NPTF 1/8 C Connector type (Lead wire: 0.6 m) CL Connector type (Lead wire: 3 m) CN Without connector Note) Single mounting style: M5 x 0.8 (female) threaded. Output specifications 14 NPN open...

Compact Pressure Switch Series ZSE1/ISE1 Output Specifications

Calibration Procedure • Set the ON-pressure by the pressure setting trimmer. Turning clockwise can set the high pressure/high vacuum pressure. • In the event of setting, use a flat head screwdriver suited for the groove of a trimmer, and rotate it lightly with a fingertip. • Switches with variable hysteresis can be adjusted by means of the HYS potentiometer in the range 1 to 10% of the setting pressure range. • Readjust it when the hysteresis setting trimmer was changed after setting the ON Pressure selling trimmer Hysteresis selling trimmer Indicator light • With pressure setting trimmer 1 (SET...

Compact Pressure Switch Series ZSE1/ISE1 Grommet type: Hysteresis setting trimmer Indicator light (Red, Green) Pressure setting trimmer Connector type: Hysteresis setting trimmer Indicator light (Red, Green) Pressure setting trimmer Pressure setting trimmer 2/ \ Pressure setting trimmer 1 Pressure setting trimmer 2 Pressure setting trimmer 1 Pressure supply Pressure supply Grommet type: Connector type: Pressure setting trimmer Hysteresis setting trimmer Pressure setting trimmer Hysteresis setting trimmer Pressure setting trimmer 1 Pressure setting trimmer 2 Indicator light (Red, Green) Piping...

Safety Instructions These safety instructions are intended to prevent a hazardous situation and/or equipment damage. These instructions indicate the level of potential hazard by labels of "Caution", "Warning" or "Danger". To ensure safety, be sure to observe ISO 4414 Note 1), JIS B 8370 Note 2) and other safety practices. Caution : Operator error could result in injury or equipment damage. Warning : Operator error could result in serious injury or loss of life. Danger : In extreme conditions, there is a possible result of serious injury or loss of life. Note 1) ISO 4414: Pneumatic fluid power--General...

Common Precautions Be sure to read before handling. For detailed precautions on every series, refer to main text. Products represented in this catalog are designed for use in compressed air applications only (including vacuum), unless otherwise indicated. Do not use the product outside their design parameters. Please contact SMC when using the products in applications other than compressed air (including vacuum). Install the products and operate them only after reading the instruction manual carefully and understanding its contents. Also keep the manual where it can be referred to as 2. Securing...

Quality Assurance Information Reliable quality of products in the global market To enable our customers throughout the world to use our products with even greater confidence, SMC has obtained certification for international structure for quality assurance and products pursue to meet its customers' expectations while also considering company's contribution in Quality management system This is an international standard for quality control and quality assurance. SMC has obtained a large number of certifications in Japan and overseas, providing assurance to our customers throughout SMC's quality...

SMC Product Conforming to Inter SMC products complying with EN/ISO, CSA/UL standards are supporting CE Mark The CE mark indicates that machines and components meet essential requirements of all the EC Directives applied. It has been obligatory to apply CE marks indicating conformity with EC Directives when machines and components are exported to the member Nations of the EU. Once “A manufacturer himself” declares a product to be safe by means of CE marking (declaration of conformity by manufacturer), free distribution inside the member Nations of the EU is permissible. í CE Mark SMC provides...

SMC Product Conforming to International Standards national Standards you to comply with EC directives and CSA/UL standards. Mark of compliance for CSA/UL Mark of compliance for CSA í CSA Standards & UL Standards UL and CSA standards have been applied in North America (U.S.A. and Canada) symbolizing safety of electric products, and are defined to mainly prevent danger from electric shock or fire, resulting from trouble with electric products. Both UL and CSA standards are acknowledged in North America as the first class certifying body. They have a long experience and ability for issuing product...

SMC's Global Service Network 3011 North Franklin Road Indianapolis, IN 46226, U.S.A. CANADA SMC Pneumatics (Canada) Ltd. 6768 Financial Drive Mississauga, Ontario, L5N 7J6 Canada MEXICO SMC Corporation (Mexico), S.A. DE C.V. Carr. Silao-Trejo K.M. 2.5 S/N, Predio San Jose del Duranzo CHILE SMC Pneumatics (Chile) S.A. Av. La Montana 1,115 km. 16,5 P. Norte Parque Industrial Valle Grande, Lampa Santiago, Chile Teodoro Garcia 3860 (1427) Buenos Aires, Argentina BOLIVIA SMC Pneumatics Bolivia S.R.L. Avenida Beni Numero 4665 Santa Cruz de la Sierra-Casilla de Correo 2281, Bolivia VENEZUELA SMC Neumatica...

SMC's Global Service Network FINLAND SMC Pneumatics Finland OY PL72, Tiistinniityntie 4, SF-02231 ESPOO, Finland NORWAY SMC Pneumatics Norway A/S Vollsveien 13C, Granfoss Naeringspark N-1366 LYSAKER, Norway BELGIUM (Distributor) SMC Pneumatics N.V./S.A. Nijverheidsstraat 20 B-2160 Wommelgem Belguim POLAND SMC Industrial Automation Polska Sp.z.o.o. ul. Konstruktorska 11 A, PL-02-673 Warszawa, Poland TURKEY (Distributor) Entek Pnomatik San.ve Tic. Ltd. Sti PerpaTic. Merkezi Kat:11 No. 1625 80270 Okmeydani Istanbul, Tiirkiye 36/40 Sredny prospect V.O. St. Petersburg 199004, Russia CZECH SMC Industrial...