Vacuum Pad with Ejector Pad Diameter: ø63, ø80 Ejector and pad are integrated. Space saving and reduced piping labor! Bellows type with groove Two-stage ejector More efficient ejector Suction flow rate ∗ 1) Compared with SMC single stage ejector Two-stage ejector First ejector Flat type with groove Second ejector Q2 = Suction flow rate With One-touch fitting Metric: ø4, ø6 Inch: ø5/32", ø1/4" Prevents entry of foreign matter at the pad suction port. Improved ease ∗2 of removal With groove Dents and bumps on the adsorption surface prevent the workpiece from sticking to it. This facilitates easy removal. Through-hole silencer The exhaust is discharged directly to atmosphere, cutting off the unpleasant frequency while exhibiting the maximum possible vacuum performance. (Exhaust noise when the nozzle diameter is ø0.7) ¡Structure designed to minimize clogging Port/For Vacuum release, Pressure sensor, Daisy-chain piping Daisy-chain vacuum piping is possible. Shot-blasted Micro-dents and bumps are formed on the adsorption surface. Workpieces can be removed easily. ∗2 Compared with current ZP series With ejector Without ejector

Easier maintenance Mounting with the lock plate reduces the pad replacement work steps! Lock plate Uses an isolated structure. ¡A lock plate is used to facilitate separation. ¡Rubber and metal parts can be disposed of separately. Remove the lock screw and slide the lock plate. Bellows type with groove Flat type with groove from w Remove theofstud pad. the bottom the Nozzle nominal size *2 [mm] Metric size (Male thread/Female thread) M8 NBR (Black) *1 Silicone rubber (White) M10 Urethane rubber (Brown) Inch size (Male thread/Female thread) FKM (Black) *1 5/16-18UNC 3/8-16UNC R *1 efer to the back...

Vacuum Pad with Ejector Without ejector With ejector BM Bellows type with groove UM Flat type with groove NBR (Black)* N S Silicone rubber (White) U Urethane rubber (Brown) FKM (Black)* F ∗ Refer to the back cover for identification method. Mounting Symbol Thread Male Metric thread size Female thread Male Inch thread size Female thread Silencer exhaust Type Metric Inch Port size ø4 One-touch fitting ø6 One-touch fitting ø5/32" One-touch fitting ø1/4" One-touch fitting Ejector/ Nozzle nominal size [mm] 07 10 12 15 Nozzle: ø0.7 Nozzle: ø1.0 Nozzle: ø1.2 Nozzle: ø1.5 Ejector Specifications Recommended...

Exhaust Characteristics/Flow-rate Characteristics (Representative Value) Exhaust Characteristics Flow-rate Characteristics Vacuum pressure Suction flow Suction flow [L/min(ANR)] Air consumption [L/min(ANR)] Suction flow Suction flow [L/min(ANR)] Air consumption [L/min(ANR)] 40 Suction flow [L/min(ANR)] Suction flow Suction flow [L/min(ANR)] Air consumption [L/min(ANR)] Vacuum pressure Suction flow [L/min(ANR)] Vacuum pressure Suction flow [L/min(ANR)] Air consumption [L/min(ANR)]

Vacuum Pad with Ejector Component Parts Check valve Mounting bracket Lock plate 2 pcs. included for male thread mounting (Not included for female thread mounting) Replacement Parts No. Description 8 Pad Note Flat/Bellows type with groove Included for metric size Included for inch size One-touch fitting Ejector assembly Silencer assembly Lock screw ∗ 3 pieces are included in one product. (The part numbers are for 1 piece.) Replacement Parts/How to Order o!0 Plate assembly∗ Size (Applicable pad dia./form) NBR Silicone rubber Urethane rubber FKM 1 ø63/ø80: Flat type, ø63: Bellows type ø80: Bellows...

In the case of Flat type Female thread mounting Lock screw PD port size Metric size: Rc1/8 Inch size: NPT1/8 Adapter Dimensions (by Mounting Style) J G ZHPmmmA-mmS ZHPmmmB-mmS ZHPmmmC-mmS ZHPmmmD-mmS ZHPmmmE-mmS ZHPmmmF-mmS ZHPmmmG-mmS ZHPmmmH-mmS For symbols G and H (inch-type female thread), the dimension K becomes the width across flats.

ZHP Specific Product Precautions 1 Be sure to read this before handling. For Safety Instructions and Vacuum Equipment Precautions, refer to “Handling Precautions for SMC Products” and the Operation Manual on SMC website, http://www.smcworld.com 1. Use the product while strictly observing the precautions on vacuum equipment and taking the safety into consideration. Additionally, select a pad size and material suitable for the workpiece to be adsorbed and the atmosphere. Take safety measures so that any accident, such as workpiece drop does not occur during adsorption transfer. For details, refer...

ZHP Specific Product Precautions 2 Be sure to read this before handling. For Safety Instructions and Vacuum Equipment Precautions, refer to “Handling Precautions for SMC Products” and the Operation Manual on SMC website, http://www.smcworld.com 8. When supplying the vacuum release air to the PD port, select an appropriate product suitable for the specifications so that the R port of the 2 port or 3 port valve to be used is blocked not to leak the vacuum in the closed state. 9. When using the male thread mounting type product, do not loosen the bottom nut shown in the figure below. (The bottom...