Nylon Tubing Series T/TIA tubing, Nylon tubing Burst Pressure Characteristics Curve and Operating Pressure I Be sure to read before handling. Refer i I to front matters 58 and 59 for Safety I 1 Fittings and Tubing Precautions. 1 . Applicable for general industrial water. Please consult with SMC if using other kinds of fluid. Surge pressure must be under the max. operating pressure. If the surge pressure exceeds the maximum operating pressure, it will result in damage to fittings and tubes. . The value of the max. operating pressure is at a temperature of 20°C. Refer to the burst pressure characteristics curve for other temperatures. Furthermore, abnormal temperature rises caused by adiabatic compression may result in the burst of the tube. . Please exercise caution when using this item in a clean room. There is a possibility of plasticizer and other materials precipitating on the tube surface and detracting from the cleanliness -20 m roll □ — 100 m roll (T1613 is reel.) Burst pressure Applicable fittings Operating temperature Nominal size (inch) Refer to the burst pressure characteristics curve. One-touch fittings, Insert fittings, Self-align fittings, Miniature fittings Tubing model (Please contact SMC for specifications in detail, dimensions, delivery and specifications other than those mentioned above.) Metric size and Inch size except 016: Suffix "-X3" to the end of part number. Ex.) T0425R-100-X3 Longer length reel Metric size: Suffix "-X3" to the end of part number. Ex.) T0425G-500-X3 Inch size: Suffix "-X4" to the end of part number. Ex.) TIA01BU-20-X4 Made to Order Availability