Catalogs >
SMC Corporation of America >
Special Fittings

Special Fittings
14Pages

Catalog excerpts

Rotary One-touch Fittings Standard Type/High Speed Type Series KS/KX Slide bearing Smooth operation and longer life from an oil containing slide bearing. Rotary seal_ A special rotary seal minimizes friction while providing an excellent seal. Standard nickel plated allows copper-free applications. Ball bearing A ball bearing ensures low torque rotation. Standard nickel plated allows copper-free applications. Thread sealant is standard. The male connector is equipped with a "tuberotation prevention mechanism". Series AGf (High speed) Prevents chips from intruding into bearing parts. Rotary seal X ring shape minimizes friction while providing an excellent seal. Seal is fire and shock proof fluorine rubber. Proves against high friction heat in high speed rotation and longer life. Ball bearing A ball bearing ensures low torque rotation. Stainless steel 440C improves corrosion resistance. > Other parts' specifications are same as those Low torque rotation style Rotary One-touch fittings Copper-free specifications electroless nickel plated. Thread seal is standard. Applicable Tubing Note) Use caution about the max. operating pressure for soft nylon and polyurethane. Rotating Torque/Allowable Number of Rotations Note) Rotating torque under pressure 0.5 MPa Male connector

Open the catalog to page 1

Rotary One-touch Fittings Series KS/KX I Be sure to read before handling. Refer to pages 15-18-3 to 15-18-4 fori I Safety Instructions and Common Precautions on the products mentioned j I in this catalog, and refer to pages 15-1-10 to 15-1-11 for Precautions on { 1. Implement the tube piping in such a way that laterial load should not be applied on the ball bearings, otherwise it may adversely affect the life expectancy. A flexible polyurethane tube is recommended when the lateral load is applied.

Open the catalog to page 2

Series KS/KX Male connector: KSH (Standard) * Reference dimensions after R thread installation. Male Connector: KXH (High speed) (With seal) Effective area Nylon Urethane * Reference dimensions after R thread installation. Applicable tubing Applicable tubing \Connection thread (With seal)

Open the catalog to page 3

Rotary One-touch Fittings Series KS/KX Male Elbow: KSL (Standard) * Reference dimensions after R thread installation. (With seal) Male Elbow: KXL (High speed) * Reference dimensions after R thread installation.

Open the catalog to page 4

Inch-size Rotary One-touch Fittings Standard Type Applicable Tubing: Inch Size Slide bearing Smooth operation and longer life from an oil containing slide bearing. Rotary seal A special rotary seal minimizes friction while providing an excellent seal. Standard nickel plated allows copper-free Ball bearing_ A ball bearing ensures low torque rotation. equipped with a 'lube rotation prevention mechanism." Standard nickel plated allows copper-free Thread seal is standard. Low-torque rotation style rotary One-touch fittings type (With electroless nickel Thread seal is standard. Male elbow...

Open the catalog to page 5

Inch-size Rotary One-touch Fittings 1 Be sure to read before handling. Refer to pages 15-18-3 to 15-18-4 fori 1 Safety Instructions and Common Precautions on the products mentioned 1 1 in this catalog, and refer to pages 15-1-10 to 15-1-11 for Precautions on 1 1. Implement the tube piping in such a way that the lateral load should not be applied. Although ball bearing is adopted, however if the lateral load were applied on it, it may adversely affect the life expectancy. A flexible polyurethan tube is recommended when the lateral load is applied.

Open the catalog to page 6

Male Connector: KSH (Standard) * Reference dimensions after NPT thread installation. Connection thread (With seal) Male Elbow: KSL (Standard) * Reference dimensions after NPT thread installation. (With seal)

Open the catalog to page 7

Safety Instructions These safety instructions are intended to prevent a hazardous situation and/or equipment damage. These instructions indicate the level of potential hazard by labels of "Caution", "Warning" or "Danger". To ensure safety, be sure to observe ISO 4414 Note 1), JIS B 8370 Note 2) and other safety practices. Caution : Operator error could result in injury or equipment damage. Warning : Operator error could result in serious injury or loss of life. Danger : In extreme conditions, there is a possible result of serious injury or loss of life. Note 1) ISO 4414: Pneumatic fluid...

Open the catalog to page 8

Common Precautions Be sure to read before handling. For detailed precautions on every series, refer to main text. Products represented in this catalog are designed for use in compressed air applications only (including vacuum), unless otherwise indicated. Do not use the product outside their design parameters. Please contact SMC when using the products in applications other than compressed air (including vacuum). Install the products and operate them only after reading the instruction manual carefully and understanding its contents. Also keep the manual where it can be referred to as 2....

Open the catalog to page 9

Quality Assurance Information Reliable quality of products in the global market To enable our customers throughout the world to use our products with even greater confidence, SMC has obtained certification for international structure for quality assurance and products pursue to meet its customers' expectations while also considering company's contribution in Quality management system This is an international standard for quality control and quality assurance. SMC has obtained a large number of certifications in Japan and overseas, providing assurance to our customers throughout SMC's...

Open the catalog to page 10

SMC Product Conforming to Inter SMC products complying with EN/ISO, CSA/UL standards are supporting CE Mark The CE mark indicates that machines and components meet essential requirements of all the EC Directives applied. It has been obligatory to apply CE marks indicating conformity with EC Directives when machines and components are exported to the member Nations of the EU. Once “A manufacturer himself” declares a product to be safe by means of CE marking (declaration of conformity by manufacturer), free distribution inside the member Nations of the EU is permissible. í CE Mark SMC...

Open the catalog to page 11