§|\/|Qe Shock Absorber Self Compensating Model Maximum Energy Absorption: 25-500 In.Lbs/Cycle Resistant to Load Deviation Withstands Impact Speeds of 16 fL/sec. Double Seal Enclosure Eliminates Oil Leakage

Shock AbSOrblki Series NRB Automatic adjustment absorption performance Specially designed orifice can absorb energy comprehensively and most appropriately in many different applications These range from high speed low load, to low speed high load; without requiring additional adjustment of the shock absorber. Piston stroke/displacement wave pattern Double seal enclosure Scraper and rod seal combine to form a double seal enclosure preventing oil leakage, thus maintaining the long life amping to meet the high odern world. Improved resistance against deviation Due to a newly designed high load capability...

Shock Absorber Shock absorber ——Basic type Cap type spare part numbers Applicable model* leap Construction/Parts List Parts List

How To Select An Applicable Model Ensure that both the impact velocity and the ambient temperature fall within the specifications of S Calculation of kinetic energy (E,) Calculate kinetic energy E, using the equation suitable for the classification of impact._ In the case of cylinder with load and free horizontal impact, substitute respective figures for graph @ in order to calculate E,. [5] Calculation of work energy (E2) Select any shock absorber as a provisional model and calculate work energy E2. In the case of work energy of cylinder, substitute respective figures for table @ or graph I...

Table ® Work energy of cylinder (F«S) In/lb (Operating pressure 80 psi) Operation pressure other than 80 PSI :muKiply by following coefficient Graph® Operation Range Impact Velocity (V) in/sec Note 1: Impacting object speed is momentary velocity at which object is impacting against shock a Note 2: All energy of object being equal with all of kinetic energy, the weight of object is equal with corresponding weight of impacting object We, thus giving the equation. E=—^-V2

Cap * Additional dimensions for cap type. Basic type / NRBOSO • NRB056 Cap $ Additional dimensions for cap type. Spare Parts Material : Polyurethane

©Load should always be aligned with the axis of piston rod. (In the case of eccentricity of 3° or more, please contact ©For rotational impact, load should always be aligned perpendicular to the axis of shock absorber and allowable rotation angle at stroke end should always be 92<3° (In the case of rotation angle of 3° or more, please ©Adjustment of the stopper nut (to adjust the length a) will control the suspension time of the impacting object. S: Stroke of Shock absorber (Figures specified on cataioaue) ©Avoid applications where the shock absorber rod is in direct contact with cutting oil,...

World Wide 0SMC Support... North American Branch Offices 1750 Corporate Drive, Suite 740 461 Boston Street, Suite B6 5015-C West W.T. Harris Blvd. 555 Kirk Road, Suite A 2305 East Aurora Road 990 Lone Oak Road, Suite 162 5377 Glen Alden Drive 336 Summit Point Drive HONG KONG SMC Pneumatics (Hong Kong) Ltd. North America South America SMC Pneumatics (Chile) Ltda. SMC offers the same quality and engineering expertise in many other pneumatic components Directional Control Valves Manual Valves Exhaust Cleaners Quick Exhaust Valves Proportional Valves Mechanical Valves Miniature Valves Fluid Valves...