video corpo cad

MGJ
7Pages

{{requestButtons}}

Catalog excerpts

MGJ - 1

Miniature Guide Rod Cylinder > Integral wiring/piping Series Variations

Open the catalog to page 1
MGJ - 2

Miniature Guide Rod Cylinder /limature Guide Miniature Guide Rod Cylinder Bore size Number of auto switches Auto switch type Refer to the following table ® and (2). Without auto switch (Built-in magnet) * Select the applicable auto switch from the table below. Table © Standard Strokes Table 2 Intermediate Stroke (by the 1 mm stroke) * The minimum auto switch mounting stroke is 4 mm. Applicable Auto Switches/Refer to pages 1719 to 1827 for detailed auto switch specifications. * Auto switches marked with o are produced upon receipt of order. * When using non-applicable auto switches, please...

Open the catalog to page 2
MGJ - 3

Miniature Guide Rod Cylinder Series MG J This product should not be used as a stopper. Note) Within allowable kinetic energy use only Theoretical Output Allowable Rotational Torque of Plate For the rotational torque (T) added to the plate (rod end), use a value no more than the values in the table. Operation outside of this range may cause excessive impact, which may result in the damage to the devices. Plate Non-rotating Accuracy * When extending the cylinder (initial value), non-rotating accuracy 9, without loads and deflection of guide rods, it should be a value no more than the value in...

Open the catalog to page 3
MGJ - 4

Allowable Kinetic Energy Plate Allowable Lateral Load When driving the cylinder with inertial load, keep kinetic energy no more than the allowable value. The area between bold lines in the below graphic shows the relation between load mass and maximum speed. When the eccentric distance (L) generates from the plate (rod end), be sure to keep the load mass (W) no more than a value in the below graphic. Operation outside of this range may cause excessive impact, which may result Allowable Eccentric Load Make sure that the load mass (W) is within the range in the graph below when there is an...

Open the catalog to page 4
MGJ - 5

P0255-P0352-E.qxd 08.11.17 2:18 PM Page 259 Miniature Guide Rod Cylinder Series MGJ Dimensions ø6 23 + Stroke 2 x M2.5 x 0.45 through 3.5 [≅ 23.3] 18.5 + Stroke 9 + Stroke 2 x ø3.3 through Counterbore ø6.2 depth 0.5 6 4 x M3 x 0.5 depth 5 29 20.5 2 ø5 20.5 ø3 [≅ 6.7] 9 28 20.5 ø5 2 x ø1.2 (Guide air release) [Auto switch] 8.4 6.1 + Stroke 2 x M3 x 0.5 (port size) 6 9 12 14.5 MGJ ø10 2 x M3 x 0.5 through 5 [≅ 24.5] 25 + Stroke 19 + Stroke 10.5 + Stroke 2 x ø4.3 through Counterbore ø8 depth 0.5 8 4 x M4 x 0.7 depth 5 2 x ø2 through (Guide air release) MGQ ø6 MGG 3 23 23 33 MGC ø5 [≅ 6.7] MGF...

Open the catalog to page 5
MGJ - 6

Auto Switch Proper Mounting Position (Detection at Stroke End) Auto Switch Mounting Watchmaker's screwdriver Use a watchmaker's screwdriver with a handle about 5 to 6 mm in diameter when tightening the auto switch mounting screw. Tightening torque of auto switch mounting screw should be set 0.10 to 0.20 N-m.

Open the catalog to page 6
MGJ - 7

Specific Product Precautions Be sure to read before handling. Refer to front matters 42 and 43 for Safety Instructions and pages 3 to 11 for Actuator and Auto Switch Precautions. 1. Do not put hands or fingers, etc. between the Care should be taken that hands or fingers do not get caught in between the cylinder body and the plate when air pressure is 1. Do not scratch or dent the sliding parts of the piston rod and guide rods. Damage to seals can cause air leakage or malfunction, etc. 2. When mounting the miniature guide rod cylinder with screws, do not exceed the maximum tightening torque....

Open the catalog to page 7

All SMC Corporation of America catalogs and technical brochures

  1. IFW5 series

    5 Pages

  2. ASG

    4 Pages

  3. IDG

    49 Pages

  4. CXSJ_M

    2 Pages

  5. JLV20/30

    8 Pages

  6. Series NCQ2/CQ2

    252 Pages

  7. KQG2

    18 Pages

  8. IDF*E

    48 Pages

  9. SYJ300

    60 Pages

  10. 3000 Series

    272 Pages

  11. MTS8

    23 Pages

  12. CXS-A

    60 Pages

  13. CXSL

    60 Pages

  14. MXQR

    36 Pages

  15. NC(D)Q2-Z

    252 Pages

  16. LEY series

    88 Pages

  17. MXH series

    18 Pages

  18. KQ2

    214 Pages

  19. MXQ series

    198 Pages

  20. CQ2 series

    25 Pages

  21. ISG

    10 Pages

  22. ISE3

    8 Pages

  23. ISE2

    7 Pages

  24. ISE1

    5 Pages

  25. ISA

    59 Pages

  26. IS3000

    2 Pages

  27. IS10/10M/10E

    4 Pages

  28. PSE series

    44 Pages

  29. ISE70/75/75H

    10 Pages

  30. ISE80

    17 Pages

  31. ISE40A

    29 Pages

  32. HED series

    16 Pages

  33. HEC series

    32 Pages

  34. HEB series

    9 Pages

  35. HRG series

    85 Pages

  36. HRZ series

    52 Pages

  37. HRW series

    28 Pages

  38. LQ series

    35 Pages

  39. PA series

    37 Pages

  40. LER series

    62 Pages

  41. LEJ series

    58 Pages

  42. LAT3 series

    24 Pages

  43. LEH series

    103 Pages

  44. CQS series

    59 Pages

  45. CH series

    175 Pages

  46. ARX series

    12 Pages

  47. HRS series

    47 Pages

  48. LES

    59 Pages

  49. MHS

    74 Pages

  50. MHY

    27 Pages

  51. MHC

    27 Pages

  52. MHR

    30 Pages

  53. MHZ series

    78 Pages

  54. MSQ

    37 Pages

  55. MGP

    127 Pages

  56. MXS

    38 Pages

  57. NRB

    10 Pages

  58. MXW

    22 Pages

  59. MHT

    11 Pages

  60. MY3

    54 Pages

  61. CQM

    15 Pages

  62. NCA1

    63 Pages

  63. CM2

    152 Pages

  64. NCM

    91 Pages

  65. NCG

    96 Pages

  66. NCRA1

    5 Pages

  67. CS2

    32 Pages

  68. T/TIA

    1 Pages

  69. KR

    7 Pages

  70. KF

    16 Pages

  71. KQ

    80 Pages

  72. AFF

    80 Pages

  73. AMG

    80 Pages

  74. IDF

    16 Pages

  75. HAA

    3 Pages

  76. ZFA

    14 Pages

  77. ZA

    13 Pages

  78. MHF

    32 Pages

  79. CRB

    44 Pages

  80. D

    117 Pages

  81. RB

    23 Pages

  82. CEP

    44 Pages

  83. rsq

    30 Pages

  84. CLK

    51 Pages

  85. MK

    20 Pages

  86. CLJ

    65 Pages

  87. ZSE30A

    17 Pages

  88. IDFB*E

    89 Pages

  89. ISE10

    16 Pages

  90. ITV1000/2000

    50 Pages

  91. AW

    27 Pages

  92. NVFM200

    12 Pages

  93. NVM100

    32 Pages

  94. LLA*A

    36 Pages

  95. VX3*

    41 Pages

  96. SY3000

    158 Pages

  97. CH(D)2

    175 Pages

  98. LEHZ

    82 Pages

  99. M(D)SUB

    31 Pages

  100. CXSJ

    58 Pages

  101. CY3B

    39 Pages

  102. C(D)Q2W-Z

    208 Pages

Archived catalogs

  1. ZSE1 series

    12 Pages

  2. VV061 series

    11 Pages

  3. SX series

    138 Pages

  4. ACG series

    25 Pages

  5. Shock Absorber

    16 Pages

  6. Silencer

    4 Pages