2-Color Display Digital Pressure Switch > Stainless diaphragm Oil-free (Single-layer diaphragm structure) sensor parts: stainless steel 630 Fitting parts: stainless steel 304 The sensor and fitting parts can be made to order with stainless steel 316L. Irregular value at a glance FI?>J|] ■i>I|] ■iMij ■i>I|j with ©©buttons. Choice of 2 piping directions i:Ull.imfc imi.J.l.lUU.fc J Rated pressure range RoHS compliant

b Sensor and fitting parts are electron-beam welded. b Choice of VCR® or Swagelok® fitting is available. VCR® compliant Swagelok® compliant Confirmation of the atmospheric pressure of a load lock chamber Applicable Fluid Examples ∗ VCR® and Swagelok® are registered trademarks of Swagelok Company. fluid (JIS-K2 213) b Silicon oil (JIS-K2 213) b Lubricant (JIS-K6301) b Fluorocarbon dioxide drainage b Nitrogen b Air-containing Applications Confirmation of adsorption of work pieces containing moisture Confirmation of supply pressure of cleaning lines Confirmation of working pressure of hydraulic...

Can select from 4 indicator patterns of color combinations. Rc1/8 (female threaded) is now available. b R1/4 (VCR® fitting compliant) (Swagelok® fitting compliant) Output display Analog current output is newly added. It lights when OUT1 or OUT2 outputs. Convex rubber button when it is wired for a long distance. is resistant against noise. Convex button is adopted and provides IP65 rating. Improved maneuverability and operability. open collector 1 output open collector 2 outputs Lead wire length open collector 1 output open collector 2 outputs open collector 2 outputs + Analog voltage output/Auto-shift...

2-Color Display Digital Pressure Switch For General Fluids Series ZSE80/ISE80 How to Order Rated pressure range 80 –0.1 to 1 MPa 80H –0.1 to 2 MPa Made to Order Refer to Table 1 below. For vacuum/ compound pressure Rated pressure range 80 80F Note) Calibration Operating Note) Calibration Symbol Operating manual certificate Symbol manual certificate Nil b (Booklet) — b (Booklet) b K — — — b T Y b (CD-ROM) — b (CD-ROM) b R W Rear ported Note) All texts in both English and Japanese Option 1 Note) Fixed unit ISE80H: MPa Others : MPa, kPa With unit display switching function Fixed SI unit Note) Initial...

2-Color Display Digital Pressure Switch For General Fluids (Vacuum pressure) (Compound pressure) (Positive pressure) (Positive pressure) Rated pressure range Withstand pressure Pressure sensor: Stainless steel 630, Fitting: Stainless steel 304 Wetted parts material Fluids do not corrode stainless steel 630 and 304 R1/4, NPT1/4, G1/4∗, URJ1/4, TSJ1/4, Rc1/8 Piping direction: Rear/Bottom Applicable fluid Port size 12 to 24 VDC ±10%, Ripple (p-p) 10% or less (with power supply polarity protection) Power supply voltage Current consumption NPN 1 output, NPN 2 outputs, PNP 1 output, PNP 2 outputs Maximum...

Series ZSE80/ISE80 Analog Output Current output Analog output [mA] Voltage output Rated pressure range Note) Analog output is 0.8 [V] or 3.2 [mA] at the pressure A. Range For vacuum pressure Descriptions LCD Output (OUT1) display (Orange) Lights up when OUT1 is turned ON. Output (OUT2) display (Orange) Displays the current pressure, set mode, selected display unit, and error code. Always use red or green display; or switch between green and red according to the output. Four different display settings are available. Lights up when OUT2 is turned ON. SET button button Use this button to select...

2-Color Display Digital Pressure Switch For General Fluids Internal Circuits and Wiring Examples -N Main circuit Main circuit Main circuit Max. 28V, 80 mA Residual voltage 1 V or less Max. 80 mA Residual voltage 1 V or less Max. 28V, 80 mA Residual voltage 1 V or less NPN (2 outputs) + Analog voltage output NPN (2 outputs) + Auto-shift input Gray Analog output Gray Auto-shift input Black OUT1 Load – White OUT2 Main circuit Main circuit Main circuit Black OUT1 Load – White OUT2 Max. 80 mA Residual voltage 1 V or less Max. 28V, 80 mA Residual voltage 1 V or less Max. 28V, 80 mA Residual voltage...

Atmospheric vent port ø2.6 Piping port Rc1/8 Piping port G1/4

2-Color Display Digital Pressure Switch For General Fluids Atmospheric vent port ø2.6

Series ZSE80/ISE80 Dimensions With bracket (Rear ported) A With bracket (Rear ported) With bracket (Bottom ported) 4 x ø4.5

2-Color Display Digital Pressure Switch For General Fluids Dimensions Panel mount (Rear ported) Panel-cut dimensions

Series ZSE80/ISE80 Dimensions Panel mount (Bottom ported) Panel-cut dimensions

2-Color Display Digital Pressure Switch For General Fluids F in brackets stand for the function codes. Refer to the operating manual for how to operate and function codes in detail. Function Details A Auto-shift function (F4) When there are large fluctuations in the supply pressure, the switch may fail to operate correctly. The auto-shift function compensates such supply pressure fluctuations. It measures the pressure at the time of auto-shift signal input and uses it as the reference pressure to correct the set-value on the switch. Auto-preset function, when selected in the initial setting,...

Series ZSE80/ISE80 Function Details I Unit display switching function (F0) G Error indication function Display units can be switched with this function. Error name Error code Overcurrent error Residual pressure error Applied pressure error Auto-shift error Supply pressure exceeds the maximum set pressure. The value measured at the time of auto-shift input is outside the set pressure range. ∗ After displaying the error code for one second, the switch returns to the measuring mode. It is still applied with pressure that is ±10% over the atmospheric pressure and the upper limit of the rated pressure...

Made to Order Please contact SMC for detailed dimensions, specifications, and lead times. 1 Wetted parts: Stainless steel 316L 2 Lead wire length 3 m This pressure switch has better corrosion resistance that uses stainless steel 316L for the wetted parts (pressure sensor and fitting). ∗ Refer to How to Order on page 732 for standard specifications. It has a lead wire extended to 3 meters. ∗ Refer to How to Order on page 732 for standard specifications. Option∗ Note 1) Not applicable to the rated pressure –0.1 to 2 MPa specifications (ISE80H). Note 2) A restrictor (equivalent to -X510) is installed...