ISE70/75/75H
10Pages

Catalog excerpts

2-Color Display Digital Pressure Switch Series ISE70/75/75H New NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. Rated Pressure For General Fluids For Air Metal Body Type (Die-cast aluminum) • Selectable from four patterns ON Easily identifiable abnormal readings • Lead wire with M12 connector (5 m) • Straight and right-angled connectors Functions With Bracket • User-selectable mounting orientation • Anti-chattering • Display calibration • Zero-out • Key lock • Unit display switching (Fixed SI unit in Japan) • Withstand pressure: Rated pressure x 3 • Model with initial display settings of PSI is also available as standard. • Port size PRESSURE SWITCH PRESSURE SWITCH PRESSURE SWITCH

Open the catalog to page 1

2-Color Display Digital Pressure Switch For Air With bracket 2 settings NPN open collector 2 outputs ((Pin no.: 2, 4) Fixed setting: NPN open collector 1 output (Pin no.: 4) + PNP open collector 1 output (Pin no.: 2) PNP open collector 1 output (Pin no.: 4) 2 settings PNP open collector 2 outputs (Pin no.: 2, 4) Note) Mounting screws are not included. With unit display switching function Fixed SI unit Note) Pressure unit: psi (Initial value) With unit display switching function Lead wire with M12 connector (5 m), straight Lead wire with M12 connector (5 m), right-angled Note) Fixed unit:...

Open the catalog to page 2

2-Color Display Digital Pressure Switch For Air Rated pressure range Set pressure range Withstand pressure Applicable fluid Power supply voltage 12 to 24 VDC±10%, Ripple (p-p) 10% or less (with power supply polarity protection) Current consumption Switch output Output -27: 2 settings; NPN open collector 2 outputs (Pin no.: 2, 4) Output -43: Fixed setting; NPN open collector 1 output (Pin no.: 4) + PNP open collector 1 output (Pin no.: 2) Note 1) Output -65: PNP open collector 1 output (Pin no.: 4) Output -67: 2 settings; PNP open collector 2 outputs (Pin no.: 2, 4) 80 mA Max. load current...

Open the catalog to page 3

2-Color Display Digital Pressure Switch For General Fluids None With bracket 2 settings NPN open collector 2 outputs (Pin no.: 2, 4) Fixed setting: NPN open collector 1 output (Pin no.: 4) + PNP open collector 1 output (Pin no.: 2) PNP open collector 1 output (Pin no.: 4) 2 settings PNP open collector 2 outputs (Pin no.: 2, 4) None Lead wire with M12 connector (5 m), straight With unit display switching function Display unit Lead wire with M12 connector (5 m), right-angled Pressure unit: psi (Initial value) With unit display switching function Note) Fixed unit: MPa Optional Part No. When...

Open the catalog to page 4

2-Color Display Digital Pressure Switch For General Fluids Withstand pressure Model Rated pressure range Set pressure resolution Applicable fluid 0.1 MPa Fluid or gas that will not corrode stainless steel 304, 430 and 630 Power supply voltage 12 to 24 VDC±10%, Ripple (p-p) 10% or less (with power supply polarity protection) Current consumption Switch output Output -27: 2 settings; NPN open collector 2 outputs (Pin no.: 2, 4) Output -43: Fixed setting; NPN open collector 1 output (Pin no.: 4) + PNP open collector 1 output (Pin no.: 2) Note 1) Output -65: PNP open collector 1 output (Pin no.:...

Open the catalog to page 5

Indication light (Green) MPa Displays the switch operation status. Lights up when OUT1 is turned ON. Use this button to switch the mode and set the set value. Displays the current pressure condition, set mode and error code. The display mode can be selected from four options: fixed green single-color reading, fixed red single-color reading, green reading interlocked with output for switching to red reading, or red reading interlocked with output for switching to green reading. UP button Use this button to change the mode or increase the ON/OFF set value. It also allows you to switch to the...

Open the catalog to page 6

2-Color Display Digital Pressure Switch For General Fluids Functions Error function This function eliminates slight differences in the output values and allows uniformity in the numbers displayed. Displayed values of the pressure sensor can be calibrated to within ±5% of their readings. Take the following corrective solutions when error occurs. Displayed pressure value Display calibration function Error description Overcurrent error : Factory setting display value set prior to shipment : Display calibration range Note) When the display calibration function is used, the set pressure value...

Open the catalog to page 7

PRESSURE SWITCH Note) The connector faces down (toward the piping). Do not attempt to rotate the connector, as it is not rotatable. Output -43 (Color: Gray) 1 Brown Output -65 (Color: Black) 2 White PRESSURE SWITCH Output -27 and -67 (Color: Gray) (31) (38.7)

Open the catalog to page 8

Specific Product Precautions 1 Be sure to read before handling. Refer to front matters 58 and 59 for Safety Instructions and pages 687 to 691 for Pressure Switch Precautions. Pressure Source 1. Do not drop, bump, or apply excessive impacts (980 m/s2) while handling. 1. Use of poisonous and deleterious substances, corrosive or combustible fluids Although the body of the sensor may not be damaged, the internal parts of the sensor could be damaged and lead to a malfunction. Do not use fluids such as poisonous and deleterious substances or corrosive gases. Also, note that the switch is not...

Open the catalog to page 9

Specific Product Precautions 2 Be sure to read before handling. Refer to front matters 58 and 59 for Safety Instructions and pages 687 to 691 for Pressure Switch Precautions. Set Pressure Range and Rated Pressure Range Caution 1. Set the pressure to within the rated pressure range. The set pressure range is the range of pressure that is possible in setting. The rated pressure range is the range of pressure that satisfies the specifications (accuracy, linearity, etc.) on the switch. Although it is possible to set a value outside the rated pressure range, the specifications will not be...

Open the catalog to page 10