Compact Pressure Switch Series ZSE2 (For Vacuum) / ISE2 (For Positive Pressure) For General Pneumatics Can be integrated with ZX or ZR ejector system. ZSP PS ISA PSE IS ISG ZSM Easy and simple wiring Connector type

Compact Pressure Switch Series ZSE2/ISE2 How to Order Piping specifications Operating pressure range/ Setting pressure range Nil L Positive pressure Note 1) M5 x 0.8 (female) threaded. Single mounting R 1/8 Note 1) Single mounting NPTF 1/8 Note 1) Wiring specifications Single mounting R 1/8 Note 2) Single mounting NPTF 1/8 Note 2) Grommet type (Lead wire: 3 m) W/suction filter (Mounting on ZX unit) M5 x 0.8 Connector type (Lead wire: 0.6 m) W/suction filter (Mounting on ZX unit) M6 x 1 (Option) Connector type (Lead wire: 3 m) Base mounting (Mounting on ZR unit) Without connector Grommet type...

Compact Pressure Switch Specifications Model Rated pressure range/Set pressure range 0 to –101 kPa 0 to 100 kPa 0 to 1 MPa Proof pressure 500 kPa 1.5 MPa Air/Non-corrosive, non-flammable gas Fluid Power supply voltage 12 to 24 VDC ±10%, Ripple (P-P) 10% or less (With power supply polarity protection) Current consumption 17 mA or less at 24 VDC Response time 5 ms or less Repeatability ±1% F.S. or less Enclosure IP40 Operating temperature range Operating: 0 to 60°C, Stored: –10 to 60°C (With no condensation and no freezing) Operating humidity range Operating/Stored: 35 to 85%RH (With no condensation)...

Calibration Procedure Internal Circuit and Wiring Example • Set the ON-pressure by the pressure setting 1. Attaching and detaching connectors • When assembling the connector to the switch • Pressure setting trimmer housing, push the connector straight onto the pins until the lever locks into the housing slot. When removing the connector from the switch housing, push the lever down to unlock it from the slot and then withdraw the connector straight off of the pin. Lead wire 0.2 to 0.33 mm2 Max. coating O.D. ø1.7 mm Main circuit trimmer. Turning clockwise can set the high pressure/high vacuum pressure....

Compact Pressure Switch Dimensions/With Suction Filter: ZSE2-0X Grommet type: ZSE2-0X-15 Pressure setting trimmer Vacuum pad connection port Vacuum supply port Pneumatic circuit Vacuum supply port M5 x 0.8 Vacuum pad connection port M5 x 0.8 Vacuum supply port Vacuum pad connection port Pressure setting trimmer Pneumatic circuit 10 Vacuum supply port M5 x 0.8 5.5 Vacuum pad connection port M5 x 0.8

Connector type: ZSE2- 01 -15C T1 Pressure setting trimmer Pressure setting trimmer SET H L Piping port M5 x 0.8 depth 5 Piping port M5 x 0.8 depth 5 Dimensions/Base Mount Type: ZSE2-0R Grommet type: ZSE2-0R-15 Pressure setting trimmer Connector type: ZSE2-0R-15C Indicator light (Red) Pressure setting trimmer Vacuum supply port ø3.3 Vacuum supply port ø3.3

Compact Pressure Switch Grommet type: ISE2- 01-15 T1 Pressure setting trimmer Pressure setting trimmer SET H L Piping port M5 x 0.8 depth 5 Piping port M5 x 0.8 depth 5