HAA
3Pages

Catalog excerpts

Series HAA can cool high from compressors down to remove moisture from the does not require cooling equipment and is free from concerns such as water supply cut-off or freezing- running cost is reasonable. Compact size and lightweight Uses minimal floor space Built-in drain separator Dust-protecting filter optional Model/Standard Specifications Working Principle Push button switch" Note 1) ANR indicates the flow rate converted to the value at 20°C under the atmospheric pressure and the state of relative humidity 65%. Note 2) Based on discharge rate and discharge temperature (70°C) of screw type compressors. Note 3) The accessories should be mounted by user. Option Specifications ■ HAA37 has an external push button with terminal. Accessory (Option) * The accessories should be mounted by user. Model Selection (Flow Capacity ¿/min (ANR)) Conditions: Outlet temperature 40°C, Ambient temperature 32°C, Air pressure 0.7 MPa

Open the catalog to page 1

Port size « Accessory (Option) Source voltage How to Calculate Outlet Air Temperature Outlet air temperature can be calculated with Inlet air temperature, ambient temperature and amount of air in the following procedure. (Example) Inlet air temperature: 100°C, Ambi- í/min (ANR), Air pressure: 0.7 MPa, Model: Outlet Air Temperature at Above Conditions (1) Use outlet air temperature of 38.5°C from outlet air temperature table. At this time cor- rection factor line becomes @. (2) To get correction factor of 1.35 use ambient ^ temperature correction factor® at 20°C. (3) To get outlet air...

Open the catalog to page 2

Air Cooled Aftercooler Series H AA Flow Characteristics (Example) To get pressure drop at 0.3 MPa of air pressure, 2000 ¿/min (ANR) of air flow, and model HAA22, use AP = 0.0007 MPa at 0.7 MPa from the table and convert Pi to 0.3 Ball valve Power source

Open the catalog to page 3