C(D)Q2W-Z
208Pages

Catalog excerpts

Compact Cylinder Remodeled with a new body to get more flexibility!D Can mount small auto switches on 4 surfaces. Auto switches can be mounted on any of the 4 surfaces, depending on the installation conditions. (0I2 to o25: 2 surfaces) Improved flexibility of system design. Auto switch mounting rail removed A round slot for mounting small auto switches (o12: One slot for each surface) No projection of auto switch ■ Prevention of damage to auto switch ■ Sleeves cannot get caught in the auto switch and its mounting rail. Improved ease of work and safety ■ Reduction in labor for design There is no need to check for interference with a machine, because the outer dimensions of the cylinder do not change when the auto switch is mounted. intermediate strokes (50 st or more) now kept in inventory*, enabling shorter delivery times. * Formerly produced upon receipt of order ♦ Standard stroke O Currently stocked intermediate stroke

Open the catalog to page 1

Series CQ2 Compact Cylinder The body strength (kinetic energy, allowable load, withstand pressure, etc.) is the same as the existing product. (Stroke 50 mm, built-in magnet, female thread and with ( ): With male thread 2-color indication solid state auto switch O Appropriate setting of the mounting position can be performed without mistakes. Optimum operating range at the optimum operating range. irEven if 2-color indication solid state auto switches areTixed at"he optimum operating range (the green light lights up), the operation mayT i become unstable depending on the installation...

Open the catalog to page 2

■ Reduction in number of components ■ No loss of components ^^r^ ©Insert the auto ^^✓^tos^ch @Fjx the ^ Takes a lot of labor and time because there are many components Highly likely to lose components Auto switch Auto switch The nuts and screws may fall out when installed vertically. The auto switch can be replaced with the foot brackets mounted. Auto switch interfere with the slot. Auto switch Port side Auto switch side Auto switch side Port side and auto switch side are near each other for easy handling. The rail mounting type auto switch can be mounted. Refer to page 174 for further...

Open the catalog to page 3

Compact Cylinder series CQ2 With a short overall length, the space-saving cylinder helps to make various jigs and equipment more compact. Series Variations Spring return/ Spring extend Axial Piping (Centralized piping type) Spring return/ Spring extend Water Resistant

Open the catalog to page 4

Combinations of Standard Products and Made Note 1) 012 with auto switch: With rubber bumper (Standard) Note 4) 012 to 032: (O), for 040 to 063 only Note 2) With rubber bumper (Standard) Note 5) 012: (-) Note 3) 012 to 016: (O), for 020 to 0100 only (up to 050 for single acting type) Note 6) 020 to 032: (O), for 040 to 0100 only

Open the catalog to page 5

Note 7) 020 to 025: (O), for 032 to 0100 only □ Note 10) With boss on rod end (Standard)D Note 8) Rod end lock: (-), for head end lock onlyD Note 11) 0180 to 0200: (O), for 0125 to 0160 onlyD Note 9) Head end lock: (-), for rod end lock only Note 12) The body shape Is the same as the existing product.

Open the catalog to page 6

Compact Cylinder: Standard Double Acting, Single Rod Without auto switch Without auto switch With auto switch With auto switch (Built-in magnet) * Mounting brackets are shipped together, (but not assembled). * Cylinder mounting bolts are not included. Order them separately referring to "Mounting Bolt for C(D)Q2B" on pages Note 1) Bore sizes available for air- Bore size*- Port thread type Auto switch Without auto switch * Refer to the below table for applicable auto switches. Auto switch mounting groove auto switches Note 5) The made-to-order, heat resistant auto switch -XB14 Refer to the...

Open the catalog to page 7

Compact Cylinder: Standard Double Acting, Single Rod Series Double acting, (For details, refer to pages 177 to 207.) Note) -XB14: The body shape Is the same as the existing Refer to pages 169 to 175 for the specifications of cylinders with auto switches. > Auto switch proper mounting position (detection at stroke end) and its mounting > Minimum stroke for auto switch mounting > Auto switch mounting brackets/Part no. Pneumatic type Note) Stroke length tolerance does not Include the amount of bumper change. Air-hydro type Note) Refer to "Handling Precautions for SMC Products" (M-E03-3) for...

Open the catalog to page 8

Manufacture of Intermediate Strokes (Except air-hydro type) 1. Spacer-installed type 1: Standard model number Intermediate stroke with ©: Available in 1 mm intervals A spacer is installed on tubes with a stroke longer than the specified stroke (♦). Ordering example (when ordering 032-57 mm stroke (with through-hole (standard), without switch) 2. Spacer-installed type 2: Suffix "-XB10A' Intermediate stroke with ®: Available in 1 mm intervals A spacer is installed on tubes with a stroke longer than the specified stroke (#) ♦ : Standard stroke 0 : Stroke in stock Bore size Ordering example...

Open the catalog to page 9

Compact Cylinder: Standard Double Acting, Single Rod Series Allowable Kinetic Energy Load Mass and Piston Speed ml : Mass of cylinder movable parts kg Mass of Cylinder Movable Parts/Without Built-in Magnet (g) Mass of Cylinder Movable Parts/With Built-in Magnet (g) Allowable Lateral Load at Rod End Without Auto Switch With Auto Switch If an allowable lateral load at rod end is exceeding the value in the graph, we recommend anti-lateral load type cylinder Theoretical Output (Mounting orientation:

Open the catalog to page 10

Additional Weight Mounting Bolt for CQ2B/Without Auto Switch Mounting method: Mounting bolt for through-hole mounting of the CQ2B is available as an option. Refer to the following for ordering procedures. Order the actual number of bolts that will be used. Material: Chromium molybdenum steel Surface treatment: Nickel plated Mounting bolt

Open the catalog to page 11

Compact Cylinder: Standard . /^/"^o Double Acting, Single Rod Senes ÜUZ With rubber bumper With boss on head end Built-in one-touch fittings Rod end male thread Component Parts Replacement Parts/Seal Kit (Pneumatic type) * Seal kit includes ©, ©, ®. Order the seal kit, based on each bore size. * Since the seal kit does not include a grease pack, order it separately. Grease pack part no.: GR-S-010 (10 g) Replacement Parts/Seal Kit (Air-hydro type) * Seal kit includes ©, ©, ®. Order the seal kit, based on each bore size. * Since the seal kit does not include a grease pack, order it...

Open the catalog to page 12