Modular Type Filter Regulators Filter Regulator Filter Regulator with Backflow Function Series AWDK Mist Separator Regulator Micro Mist Separator Regulator Port size Float type auto drain Square embedded type pressure gauge Round type pressure gauge Digital pressure switch Panel mount

Filter Regulator Filter Regulator with Backflow Function Filter Regulator Filter Regulator with Backflow Function • Integrated filter and regulator units save space and require less piping. • With the backflow function it incorporates a mechanism to exhaust the air pressure in the outlet side reliably and quickly. When the air supply is cut off and releasing the inlet pressure to the atmosphere, the residual pressure release of the outlet side can be ensured for a safety purpose. Refer to pages 374 through • Option/Semi-standard: Select one each for a to i. • Option/Semi-standard symbol: When...

Filter Regulator Series AW10 tO A W60 Filter Regulator with Backflow Function Seríes A W20K to A W60K Body size Note 1 ) The AW10 type comes with a backflow function as a standard feature. (K Is not available.) When using the AW10 type as w/ backflow function, backflow may not occur with the set pressure 0.15 MPa or less. Please set the Inlet pressure to at least 0.05 MPa higher than the set pressure. Note 2) Drain guide Is NPT 1/8 (applicable to the AW30(K) to AW60(K)). The auto drain port comes with 03/8" one-touch fitting (applicable to the Note 3) Drain guide Is G 1/8 (applicable to the AW20(K))...

Semi-standard/Bowl Assembly Part No. Note 1 ) Assembly of a bracket and set nuts Note 2) □ in part numbers for a round pressure gauge indicates a type of connection thread. No indication is necessary for R; however, indicate N for NPT. Please contact SMC regarding the connection thread NPT and pressure gauge supply for psi unit specifications. Note 3) Standard pressure gauge Note 4) Including one O-ring and 2 mounting screws. [ ]: Pressure gauge cover only Note 5) Lead wire with connector (2 m), adapter, lock pin, O-ring (1 pc), mounting screw (2 pes.) are attached. [ ]: Switch body only. Also,...

Specific Product Precautions Be sure to read before handling. Refer to front matters 42 and 43 for Safety Instructions 1. Residual pressure disposal (outlet pressure removal) is not possible for the AW20 to AW60 even though the inlet pressure is exhausted. When the residual pressure disposal is per- formed, use the filter regulator with backflow function (AW20K 1. Replace the element every 2 years or when the pressure drop becomes 0.1 MPa, whichever comes first, to prevent damage 1. Set the regulator while verifying the displayed values of the in- let and outlet pressure gauges. Turning the regulator...

Flow Characteristics (Representative values) Condition: Inlet pressure 0.7 MPa Flow rate (tímin (ANR)) Flow rate (tímin (ANR))_ Flow rate (tímin (ANR))_ Pressure Characteristics (Representative values) Conditions: Inlet pressure 0.7 MPa, Outlet pressure 0.2 MPa, Flow rate 20 ¿/min (ANR)

Filter Regulator Series AW10 tO A W60 Filter Regulator with Backflow Function Seríes A W20K to A W60K Component Parts (Filter Regulator with Backflow Function) Replacement Parts Note 1 ) The AW10 is a piston type. Assembly of a piston and a seal (KSYP-13). Note 2) Bowl O-ring is included for the AW20(K) to AW60(K). Please contact SMC regarding the bowl assembly supply for psi and °F unit specifications. Note 3) Bowl assembly for the AW30(K) to AW60(K) models comes with a bowl guard (steel band material). Note 4) Check valve assembly is applicable for a filter regulator with backflow function...

Working Principle (Filter Regulator with Backflow Function) When the inlet pressure is higher than the regulating pressure, the check valve operates as a normal regulator (Figure 1). When the inlet pressure is shut off and exhausted, any inlet pressure applied to the valve © will be lost. The force for seating the valve © is the valve spring force @ only. When the valve © is opened using the outlet force, the outlet pressure will be exhausted at the inlet When the set pressure is 0.15 MPa or less, valve © may not open due to the valve spring @ force. Pressure in Inlet pressure Pressure In Inlet...

Filter Regulator Series AW10 tO A W60 Filter Regulator with Backflow Function Seríes A W20K to A W60K Panel fitting dimension Plate thickness Panel fitting dimension Plate thickness Applicable model Square embedded type pressure gauge Digital pressure switch Round type pressure gauge Round type pressure gauge (with color zone) Applicable model With drain guide With auto drain (N.OJN.C. Metal bowl Metal bowl with level gauge With drain guide Drain cock with barb fitting Note) The total length of B dimension Is the length when the filter regulator knob Is unlocked.

Filter Regulator Made to Order Specifications: Please contact SMC for detailed dimensions, specifications, and lead times. CD Special Temperature Environment Special materials are used in the manufacturing of seals and resin parts to allow them to withstand various temperature conditions in cold Applicable Model • Option/Seml-standard: Select one each for a to g. • Optlon/Semi-standard symbol: When more than one specification is required, indicate In alphanumeric order. Metal bowl Note 1) Option B, G, H are not assembled and supplied loose at the time of shipment. Note 2) Assembly of a bracket...

Filter Regulator Series A W20 tO A W60 Strong materials are used in the manufacturing of air filters intended for high pressure operation. Also, construction modification allows a wider regulating pressure range. Applicable Model • Optlon/Seml-standard: Select one each for a to f. • Optlon/Seml-standard symbol: When more than one specification is required, indicate in alphanumeric order. Note 1 ) Option B, G, H are not assembled and supplied loose at the time of shipment. Note 2) Assembly of a bracket and set nuts (AW20 to AW40) Including 2 mounting screws for the AW60 Note 3) Mounting thread...