Catalogs >
SMC Corporation of America >
AC Series - Modular F.R.L. Units

AC Series - Modular F.R.L. Units
70Pages

Catalog excerpts

Modular F.R.L. Units RoHS Modular Design with Uniform Body Style Better visibility & environmental resistance 2-layer construction The bowl is covered with a transparent bowl guard! * Body size 30 or more ¡The inside is visible from 360°. ¡ he bowl is completely T protected from the environment. Safety improved Transparent bowl guard Material: Polycarbonate Inner bowl Material: Polycarbonate

Open the catalog to page 1

Modular F.R.L. Units AC Series Transparent bowl guard M Better environmental resistance: Transparent bowl guard can protect the inner bowl! Windows on the bowl guard have been removed and the inner bowl is instead covered with a polycarbonate transparent bowl guard. Now, even if the environment changes and the bowl is exposed to corrosive chemical or oil splash, the foreign matter will not stick directly to the pressurized bowl. This can reduce risk of bowl breakage. Transparent bowl guard Previous model Cracks may occur in a portion where the internal pressure is applied. Inner bowl...

Open the catalog to page 2

Modular F.R.L. Units AC Series Selection of pressure gauges Square embedded type pressure gauge Round type pressure gauge Digital pressure switch Open/close type gauge cover q pen the O gauge cover. w djust the indicator to a A specified position. e lose the gauge cover. C Open the gauge cover in the direction of the arrow with fingertips. Adjust the indicator using a flat blade screwdriver. Close the gauge cover in the direction of the arrow and push it in until it clicks in place. Easy to handle Easy to hold when unlocked Finger grip Pressure regulation while unlocked Interchangeability...

Open the catalog to page 3

Modular F.R.L. Units AC Series Filter Regulator © Lubricator

Open the catalog to page 4

Modular F.R.L. Units AC Series Mist Separator Micro Mist Separator p. 30 ] Port size IT Interchangeable with existing model • New spacer can be connected to the existing AF-A, AR-B, AL-A, AW-B series. • Existing spacer can be connected to the new AF-D, AR(K)-D, AL-D, AW(K)-D series.

Open the catalog to page 5

Air Filter + Regulator + Lubricator TT • Option/Semi-standard: Select one each for a to i. • Option/Semi-standard symbol: When more than one specification is required, indicate in alphanumeric order. Example) AC30-F03DE1-16NR-D

Open the catalog to page 6

Body size *1 Drain guide is NPT1/8 (applicable to the AC20-D) and NPT1/4 (applicable to the AC30-D to AC40-D). The auto drain port comes with a 03/8" One-touch fitting (applicable to the AC30-D to AC40-D). *2 Drain guide is G1/8 (applicable to the AC20-D) and G1/4 (applicable to the AC30-D to AC40-D). *3 Options G and M are not assembled and supplied loose at the time of shipment. *4 When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl. Releasing the residual condensate before ending operations for the day is recommended. *5 If the...

Open the catalog to page 7

AC20-D to AC40-D Series Inlet pressure of 0.1 MPa Inlet pressure of 0.7 MPa Flow Rate Characteristics (Representative values) AC20-D Flow rate [L/min (ANR)] Flow rate [L/min (ANR)] Flow rate [L/min (ANR)] Pressure Characteristics (Representative values) Inlet pressure of 0.7 MPa, Outlet pressure of 0.2 MPa, Flow rate 20 L/min (ANR)

Open the catalog to page 8

r — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — t Be sure to read this before handling the products. Refer to the back cover for safety instructions. For F.R.L. units I precautions, refer to the “Handling Precautions for SMC Products” and the “Operation Manual”, https://www.smcworld.com 1. Use an air filter with 5 pm or less filtration rating on the inlet side of the valve to avoid any damage to the seat caused by dust when mounting a pressure relief 3-port valve on the inlet side. 1. When the bowl is installed on the air filter, filter...

Open the catalog to page 9

P2 (Pressure gauge port size) (Pressure gauge port size) (Pressure gauge port size)

Open the catalog to page 10

Filter Regulator + Lubricator • Option/Semi-standard: Select one each for a to i. • Option/Semi-standard symbol: When more than one specification is required, indicate in alphanumeric order. Example) AC30A-F03DE1-16NR-D

Open the catalog to page 12

*1 Drain guide is NPT1/8 (applicable to the AC20A-D) and NPT1/4 (applicable to the AC30A-D to AC40A-D). The auto drain port comes with a 03/8" One-touch fitting (applicable to the AC30A-D to AC40A-D). *2 Drain guide is G1/8 (applicable to the AC20A-D) and G1/4 (applicable to the AC30A-D to AC40A-D). *3 Options G and M are not assembled and supplied loose at the time of shipment. *4 When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl. Releasing the residual condensate before ending operations for the day is recommended. *5 If the...

Open the catalog to page 13

P2 (Pressure gauge port size) (Pressure gauge port size) (Pressure gauge port size)

Open the catalog to page 14

AC130B 03DE 6 © © © • Option/Semi-standard: Select one each for a to h. • Option/Semi-standard symbol: When more than one specification is required, indicate in alphanumeric order. Example) AC30B-F03DE1-16NR-D

Open the catalog to page 16

*1 Drain guide is NPT1/8 (applicable to the AC20B-D) and NPT1/4 (applicable to the AC30B-D to AC40B-D). The auto drain port comes with a 03/8" One-touch fitting (applicable to the AC30B-D to AC40B-D). *2 Drain guide is G1/8 (applicable to the AC20B-D) and G1/4 (applicable to the AC30B-D to AC40B-D). *3 Options G and M are not assembled and supplied loose at the time of shipment. *4 When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl. Releasing the residual condensate before ending operations for the day is recommended. *5 If the...

Open the catalog to page 17

(Pressure gauge port size) (Pressure gauge port size) (Pressure gauge port size)

Open the catalog to page 18

Air Filter + Mist Separator + Regulator • Option/Semi-standard: Select one each for a to h. • Option/Semi-standard symbol: When more than one specification is required, indicate in alphanumeric order. Example) AC30C-F03DE1-16NR-D

Open the catalog to page 20