*mydirectindustry

Catalogs
smartGAS Mikrosensorik GmbH
Sulfuryl Flouride SO2F2 6 Vol.-%

Sulfuryl Flouride SO2F2 6 Vol.-%

Product catalog summary

Product Overview
The FLOWEVO Infrared Gas Sensor by smartGAS Mikrosensorik GmbH is designed for detecting Sulfuryl Fluoride (SO2F2) with a measurement range of 0 to 6 Vol.-%. It features a pre-calibrated, compact design with a 3/5 mm gas line connector and operates on a 3.3–6 V DC supply voltage. The sensor supports Modbus ASCII or RTU communication and indicates status via an LED. It is suitable for applications such as fumigation monitoring, pest control, and process control.

Specifications

Measurement Principle: Non-Dispersive Infra-Red (NDIR), dual wavelength
Measurement Range: 0 ... 6 Vol.-% Full Scale (FS)
Flow Rate: 0.1 ... 1.0 l/min
Mounting Dimensions: 70 mm x 60 mm x 40 mm
Warm-up Time: < 2 minutes (start-up), < 30 minutes (full specification)

Measuring Response

Digital Resolution: 0.001 Vol.-%
Response Time: t90 ≤ 12.6 s (standard), ≤ 1.2 s (fast)
Detection Limit: ≤ 0.02 Vol.-% (standard), ≤ 0.04 Vol.-% (fast)
Repeatability: ≤ ± 0.03 Vol.-%
Linearity Error: ≤ ± 0.08 Vol.-%
Long Term Stability: Zero ≤ ± 0.025 Vol.-% over 1000 h, Span ≤ ± 0.050 Vol.-% over 1000 h

Environmental and Electrical Parameters

Operating Temperature: 0 … +50 °C
Storage Temperature: -20 … +60 °C
Air Pressure: 800 … 1150 hPa
Humidity: 0 … 95 % relative humidity (not condensing)
Supply Voltage: 3.3 V ... 6.0 VDC
Power Consumption: < 800 mW

Additional Information
The sensor requires a stable gas dew point of < +5°C and a clean, particle-free sample gas. Calibration is recommended at first initiation and periodically thereafter. The sensor's performance may vary based on application, target gas, and measurement range. For further details, visit the smartGAS website or contact their sales team.

Catalog excerpts

FLOWEVO Infrared gas Sensor Sulfuryl Flouride SO2F2 6 Vol.-% smartGAS item number: F3-412606-05000 Pre calibrated Compact Design 3/5 mm gas line connector 3.3–6 V DC supply voltage Modbus ASCII or RTU Status indicated by LED Low drift Application examples Fumigation monitoring Pest control Process control Available equipment Gas cooler Particle filter Gas pump Calibration Software Mounting equipment smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I [email protected] I www.smartgas.eu Available design in support Mechanical Installation Data communication Gas pre-treatment

Open the catalog to page 1

FLOWEVO I Sulfuryl Flouride SO2F2 I F3-412104-05000 General features Measurement principle: Non-Dispersive Infra-Red (NDIR), dual wavelength Measurement range: by flow (nearly atmospheric pressure) Flow rate: Mounting dimensions: Warm-up time: < 2 minutes (start-up time) < 30 minutes (full specification) Measuring response* Digital resolution: Linearity error (straight line deviation): Long term stability (zero): Long term stability (span): Influence of T, P, flow rate, other* Temp. dependence (zero): Temp. dependence (span): Pressure dependence: Flow rate dependence: Cross sensitivity (zero)...

Open the catalog to page 2

Sulfuryl Flouride SO2F2 6 Vol.-%

Sulfuryl Flouride SO2F2 6 Vol.-%

Catalog excerpts

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures