*mydirectindustry

Catalogs
smartGAS Mikrosensorik GmbH
Sulfuryl Flouride SO2F2 4 Vol.-%

Sulfuryl Flouride SO2F2 4 Vol.-%

Product catalog summary

Product Overview
The FLOWEVO Infrared Gas Sensor for Sulfuryl Fluoride (SO2F2) is a pre-calibrated, compact device designed for applications such as fumigation monitoring, pest control, and process control. It features a 3/5 mm gas line connector and operates on a 3.3–6 V DC supply voltage. The sensor communicates via Modbus ASCII or RTU and indicates status through an LED.

Specifications

Measurement Principle: Non-Dispersive Infra-Red (NDIR), dual wavelength
Measurement Range: 0 ... 4 Vol.-% Full Scale (FS)
Flow Rate: 0.1 ... 1.0 l/min
Mounting Dimensions: 70 mm x 60 mm x 40 mm
Warm-up Time: Less than 2 minutes for start-up, less than 30 minutes for full specification

Measuring Response

Digital Resolution: 0.001 Vol.-%
Response Time: Standard t90 ≤ 12.6 s, Fast t90 ≤ 1.2 s
Detection Limit: ≤ 0.004 Vol.-% (Standard), ≤ 0.008 Vol.-% (Fast)
Repeatability: ≤ ± 0.02 Vol.-%
Linearity Error: ≤ ± 0.04 Vol.-%
Long Term Stability: Zero ≤ ± 0.025 Vol.-% over 1000 hours, Span ≤ ± 0.045 Vol.-% over 1000 hours

Environmental and Electrical Parameters

Operating Temperature: 0 to +50 °C
Storage Temperature: -20 to +60 °C
Air Pressure: 800 to 1150 hPa
Humidity: 0 to 95% relative humidity (non-condensing)
Supply Voltage: 3.3 V to 6.0 VDC
Power Consumption: Average < 800 mW

Additional Information
The sensor requires a stable gas dew point of less than +5°C and a clean, particle-free sample gas. Calibration is recommended at first initiation and periodically thereafter. The device is made in Germany and all specifications are subject to change without notice. For further details, visit the smartGAS website or contact their sales team.

Catalog excerpts

FLOWEVO Infrared gas Sensor Sulfuryl Flouride SO2F2 4 Vol.-% smartGAS item number: F3-412406-05000 Pre calibrated Compact Design 3/5 mm gas line connector 3.3–6 V DC supply voltage Modbus ASCII or RTU Status indicated by LED Low drift Application examples Fumigation monitoring Pest control Process control Available equipment Gas cooler Particle filter Gas pump Calibration Software Mounting equipment smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I [email protected] I www.smartgas.eu Available design in support Mechanical Installation Data communication Gas pre-treatment

Open the catalog to page 1

FLOWEVO I Sulfuryl Flouride SO2F2 I F3-412406-05000 General features Measurement principle: Non-Dispersive Infra-Red (NDIR), dual wavelength Measurement range: by flow (nearly atmospheric pressure) Flow rate: Mounting dimensions: Warm-up time: < 2 minutes (start-up time) < 30 minutes (full specification) Measuring response* Digital resolution: Linearity error (straight line deviation): Long term stability (zero): Long term stability (span): Influence of T, P, flow rate, other* Temp. dependence (zero): Temp. dependence (span): Pressure dependence: Flow rate dependence: Cross sensitivity (zero)...

Open the catalog to page 2

Sulfuryl Flouride SO2F2 4 Vol.-%

Sulfuryl Flouride SO2F2 4 Vol.-%

Catalog excerpts

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures