*mydirectindustry

Catalogs
smartGAS Mikrosensorik GmbH
Sulfur Hexafluoride SF6 50 ppm

Sulfur Hexafluoride SF6 50 ppm

Product catalog summary

Product Overview
The FLOWEVO Infrared Gas Sensor for Sulfur Hexafluoride (SF6) is a pre-calibrated, compact device designed for detecting SF6 gas leaks and analyzing SF6 in various applications such as high voltage cables, transformers, and laboratories. It features a 3/5 mm gas line connector, operates on a 3.3–6 V DC supply voltage, and supports Modbus ASCII or RTU communication protocols. The sensor's status is indicated by an LED, and it is designed to have low drift.

Specifications

Measurement Principle: Non-Dispersive Infra-Red (NDIR), dual wavelength
Measurement Range: 0 to 50 ppm Full Scale (FS)
Flow Rate: 0.1 to 1.0 l/min
Mounting Dimensions: 156 mm x 30 mm x 50 mm
Warm-up Time: Less than 2 minutes for start-up, less than 30 minutes for full specification

Performance

Digital Resolution: 0.01 ppm
Response Time: t90 ≤ 11.6 s, ton ≤ 15.9 s at 0.7 l/min
Detection Limit: ≤ 0.5 ppm
Repeatability: ≤ ± 0.5 ppm
Linearity Error: ≤ ± 0.7 ppm
Long Term Stability: Zero ≤ ± 6 ppm, Span ≤ ± 7 ppm over 240 hours

Environmental and Electrical Parameters

Operating Temperature: 0 to +50 °C
Storage Temperature: -20 to +60 °C
Air Pressure: 800 to 1150 hPa
Humidity: 0 to 95% relative humidity (non-condensing)
Supply Voltage: 3.3 V to 6.0 VDC
Power Consumption: Average < 800 mW

Additional Features
The sensor includes options for gas coolers, particle filters, gas pumps, calibration software, and mounting equipment. It requires a clean, particle-free sample gas with a dew point below +5°C.

Important Notes
All specifications are subject to change without notice. Calibration and recalibration are recommended depending on application and ambient conditions. For more information, visit the smartGAS website or contact their sales team.

Catalog excerpts

FLOWEVO Infrared gas Sensor Sulfur Hexafluoride SF6 50 ppm smartGAS item number: F3-602503-05000 Pre calibrated Compact Design 3/5 mm gas line connector 3.3–6 V DC supply voltage Modbus ASCII or RTU Status indicated by LED Low drift Application examples Fix and portable SF6 leakage detection Tracer gas measurement SF6 analysis High voltage cables and transformers Laboratories Available equipment Gas cooler Particle filter Gas pump Calibration Software Mounting equipment smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I [email protected] I www.smartgas.eu Available design in support Mechanical Installation Data communication Gas pre-treatment

Open the catalog to page 1

FLOWEVO I Sulfur Hexafluoride SF6 I F3-602503-05000 General features Measurement principle: Non-Dispersive Infra-Red (NDIR), dual wavelength Measurement range: by flow (nearly atmospheric pressure) Flow rate: Mounting dimensions: Warm-up time: < 2 minutes (start-up time) < 30 minutes (full specification) Measuring response* Digital resolution: Linearity error (straight line deviation): Long term stability (zero): Long term stability (span): Influence of T, P, flow rate, other* Temp. dependence (zero): Temp. dependence (span): Pressure dependence: Flow rate dependence: Cross sensitivity (zero)...

Open the catalog to page 2

Sulfur Hexafluoride SF6 50 ppm

Sulfur Hexafluoride SF6 50 ppm

Catalog excerpts

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures