video corpo

F3-042157-05005

F3-042157-05005

F3-042157-05005

Product catalog summary
General Overview: The document provides technical specifications for the smartGAS FLOW EVO infrared gas sensor, specifically designed for detecting methane (CH4) and bromomethane (CH3Br). The sensor is pre-calibrated, compact, and features a low drift design with LED status indication.
Specifications:
  • Measurement Principle: Non-Dispersive Infra-Red (NDIR), dual wavelength.
  • Measurement Range: 0 to 15 Vol.-% for CH4.
  • Gas Supply: By flow at nearly atmospheric pressure with a flow rate of 0.1 to 1.0 l/min.
  • Mounting Dimensions: 116 mm x 30 mm x 50 mm.
  • Warm-up Time: Less than 2 minutes for start-up, less than 30 minutes for full specification.
Performance:
  • Digital Resolution: 0.001 Vol.-%.
  • Response Time: t90 ≤ 10.8 s, ton ≤ 16.5 s at 0.7 l/min.
  • Detection Limit: ≤ 0.015 Vol.-%.
  • Repeatability: ≤ ± 0.05 Vol.-%.
  • Linearity Error: ≤ ± 0.1 Vol.-%.
  • Long Term Stability: Zero ≤ ± 0.1 Vol.-% over 1000 hours, Span ≤ ± 0.9 Vol.-% over 1000 hours.
Environmental and Electrical Specifications:
  • Operating Temperature: 0 to +50 °C.
  • Storage Temperature: -20 to +60 °C.
  • Air Pressure: 800 to 1150 hPa.
  • Humidity: 0 to 95% relative humidity (non-condensing).
  • Supply Voltage: 3.3 to 6.0 VDC.
  • Power Consumption: Average < 800 mW.
  • Output Signal: Modbus ASCII/RTU via UART.
Recommendations:
  • Recalibration is recommended at first initiation and periodically depending on application and ambient conditions.
  • Consult smartGAS for parts with different temperature and measurement ranges.
Legal and Contact Information: All rights reserved by smartGAS Mikrosensorik GmbH. For more information, visit their website or contact [email protected].
See more

Catalog excerpts

F3-042157-05005-1

Infrared gas sensor CH4 // Methane // 15 Vol.-% // (also applicable for CH3Br // Bromomethane // Appr. 35 Vol.-%) smartGAS item number: F3-042157-05005 • Pre calibrated • Compact design • 3/5 mm gas line connectors • 3.3 – 6.0 V DC supply voltage • Modbus ASCII or RTU • Status indication by LED • Low drift *Illustration similar (gold coated) similar (gold coated) smartGAS Mikrosensorik GmbH |Huenderstr. 1 | 74080 Heilbronn | Germany phone: +49 7131/797553-0 | fax: +49 7131/797553-10 | www.smartgas.eu|[email protected]

 Open the catalog to page 1
F3-042157-05005-2

F3-042157-05005 General features Measurement principle: Measurement range: Gas supply: Flow rate: Mounting dimensions: Warm-up time: CH4 // Methane // 15 Vol.-% // (CH3Br // Bromomethane // Appr. 35 Vol.-%) Non Dispersive Infra-Red (NDIR), dual wavelength 0 ... 15 Vol.-% Full Scale (FS) CH4 by flow (nearly atmospheric pressure) 0.1 ... 1.0 l / min 116 mm x 30 mm x 50 mm (L x W x H) < 2 minutes (start up time) < 30 minutes (full specification) Measuring response (@CH4)* Digital resolution: 0.001 Vol.-% Response time @ 0.7 l / min**: Standard: Fast: t90 (10 to 90 % FS): ≤ 10.8 s ≤ 0.7 s ton (0...

 Open the catalog to page 2

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures

  1. Ethylene C2H4

    2  Pages

  2. PAS

    4  Pages

  3. SILAREX

    4  Pages

  4. FLOW EVO

    2  Pages

  5. ANAREX

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.