*mydirectindustry

Catalogs
smartGAS Mikrosensorik GmbH
CH4 gas sensor FLOW EVO CH4 5000 ppm

CH4 gas sensor FLOW EVO CH4 5000 ppm

Product catalog summary

Product Overview
The FLOWEVO Infrared Gas Sensor for Methane (CH4) by smartGAS Mikrosensorik GmbH is a pre-calibrated, compact device designed for gas analysis, biogas applications, and environmental monitoring. It features a 3/5 mm gas line connector and operates on a 3.3–6 V DC supply voltage. The sensor supports Modbus ASCII or RTU communication and indicates status via an LED.

Specifications

Measurement Principle: Non-Dispersive Infra-Red (NDIR), dual wavelength
Measurement Range: 0 ... 4.4 Vol.-% Full Scale (FS)
Flow Rate: 0.1 ... 1.0 l/min
Mounting Dimensions: 156 mm x 30 mm x 50 mm
Warm-up Time: < 2 minutes (start-up), < 30 minutes (full specification)

Measuring Response

Digital Resolution: 0.001 Vol.-%
Response Time: t90 ≤ 11.6 s, ton ≤ 15.9 s
Detection Limit: ≤ 0.03 Vol.-%
Repeatability: ≤ ± 0.05 Vol.-%
Linearity Error: ≤ ± 0.05 Vol.-%
Long Term Stability: Zero ≤ ± 0.044 Vol.-%, Span ≤ ± 0.335 Vol.-% over 1000 hours

Environmental and Electrical Parameters

Operating Temperature: 0 … +50 °C
Storage Temperature: -20 … +60 °C
Air Pressure: 800 … 1150 hPa
Humidity: 0 … 95 % relative humidity (non-condensing)
Supply Voltage: 3.3 V ... 6.0 VDC
Power Consumption: < 800 mW

Additional Information
The sensor requires a stable gas dew point of < +5°C and a clean, particle-free sample gas. Calibration is recommended at first initiation and periodically thereafter. The device's specifications are subject to change, and users should consult smartGAS for specific applications and recalibration needs.

Catalog excerpts

FLOWEVO Infrared gas Sensor Methane CH4 4.4 Vol.-% smartGAS item number: F3-042446-05000 Pre calibrated Compact Design 3/5 mm gas line connector 3.3–6 V DC supply voltage Modbus ASCII or RTU Status indicated by LED Low drift Application examples Gas analysis Biogas application Environmental monitoring Available equipment Gas cooler Particle filter Gas pump Calibration Software Mounting equipment smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I [email protected] I www.smartgas.eu Available design in support Mechanical Installation Data communication Gas pre-treatment

Open the catalog to page 1

FLOWEVO I Methane CH4 I F3-042446-05000 General features Measurement principle: Non-Dispersive Infra-Red (NDIR), dual wavelength Measurement range: by flow (nearly atmospheric pressure) Flow rate: Mounting dimensions: Warm-up time: < 2 minutes (start-up time) < 30 minutes (full specification) Measuring response* Digital resolution: Linearity error (straight line deviation): Long term stability (zero): Long term stability (span): Influence of T, P, flow rate, other* Temp. dependence (zero): Temp. dependence (span): Pressure dependence: Flow rate dependence: Cross sensitivity (zero) other gases:...

Open the catalog to page 2

CH4 gas sensor FLOW EVO CH4 5000 ppm

CH4 gas sensor FLOW EVO CH4 5000 ppm

Catalog excerpts

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures