*mydirectindustry

Catalogs
smartGAS Mikrosensorik GmbH
Carbon monoxide CO 50 Vol.-%

Carbon monoxide CO 50 Vol.-%

Product catalog summary

Product Overview: The FLOWEVO Infrared Gas Sensor for Carbon Monoxide (CO) by smartGAS Mikrosensorik GmbH is a pre-calibrated, compact device designed for various applications including gas analysis, biogas applications, environmental monitoring, process control, and emission monitoring. It features a 3/5 mm gas line connector, operates on a 3.3–6 V DC supply voltage, and supports Modbus ASCII or RTU communication.

Specifications: The sensor uses a Non-Dispersive Infra-Red (NDIR) dual wavelength measurement principle with a range of 0 to 50 Vol.-% Full Scale. It requires a gas flow rate of 0.1 to 1.0 l/min and has mounting dimensions of 76 mm x 30 mm x 50 mm. The warm-up time is less than 2 minutes for start-up and less than 30 minutes for full specification.

Measuring Response: The digital resolution is 0.01 Vol.-%, with a response time of ≤ 9.9 s for standard and ≤ 0.7 s for fast settings at 0.7 l/min. The detection limit is ≤ 0.2 Vol.-% for standard and ≤ 0.38 Vol.-% for fast settings. Repeatability is ≤ ± 0.3 Vol.-%, and linearity error is ≤ ± 0.6 Vol.-%.

Environmental and Electrical Parameters: The sensor operates within a temperature range of 0 to +50 °C and can be stored between -20 to +60 °C. It functions under air pressure conditions of 800 to 1150 hPa and ambient humidity of 0 to 95% (non-condensing). The supply voltage ranges from 3.3 V to 6.0 VDC, with a peak supply current of < 400 mA at 3.3 V and < 240 mA at 5.0 V.

Additional Features: The sensor includes status indication via LED and requires calibration for zero and span by software. It is recommended to consult smartGAS for parts with different temperature and measurement ranges and to perform recalibration cycles based on application and ambient conditions.

Disclaimer: All specifications are subject to change without notice, and the data provided is for guidance only. No liability is accepted for any consequential losses, injury, or damage resulting from the use of this document.

Catalog excerpts

FLOWEVO Infrared gas Sensor Carbon monoxide CO 50 Vol.-% smartGAS item number: F3-222507-05000 Pre calibrated Compact Design 3/5 mm gas line connector 3.3–6 V DC supply voltage Modbus ASCII or RTU Status indicated by LED Low drift Application examples Gas analysis Biogas application Environmental monitoring Process control Emission monitoring Available equipment Gas cooler Particle filter Gas pump Calibration Software Mounting equipment smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I [email protected] I www.smartgas.eu Available design in support Mechanical Installation Data communication Gas pre-treatment

Open the catalog to page 1

FLOWEVO I Carbon monoxide CO I F3-222507-05000 General features Measurement principle: Non-Dispersive Infra-Red (NDIR), dual wavelength Measurement range: by flow (nearly atmospheric pressure) Flow rate: Mounting dimensions: Warm-up time: < 2 minutes (start-up time) < 30 minutes (full specification) Measuring response* Digital resolution: Linearity error (straight line deviation): Long term stability (zero): Long term stability (span): Influence of T, P, flow rate, other* Temp. dependence (zero): Temp. dependence (span): Pressure dependence: Flow rate dependence: Cross sensitivity (zero) other...

Open the catalog to page 2

Carbon monoxide CO 50 Vol.-%

Carbon monoxide CO 50 Vol.-%

Catalog excerpts

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures