*mydirectindustry

Catalogs
smartGAS Mikrosensorik GmbH
Carbon monoxide CO 30 Vol.-%

Carbon monoxide CO 30 Vol.-%

Product catalog summary

Product Overview: The FLOWEVO Infrared Gas Sensor for Carbon Monoxide (CO) by smartGAS Mikrosensorik GmbH is a pre-calibrated, compact sensor designed for various applications including gas analysis, biogas applications, environmental monitoring, process control, and emission monitoring. It features a 3/5 mm gas line connector, operates on a 3.3–6 V DC supply voltage, and supports Modbus ASCII or RTU communication.

Specifications: The sensor uses a Non-Dispersive Infra-Red (NDIR) dual wavelength measurement principle with a range of 0 to 30 Vol.-% Full Scale (FS). It requires a gas flow rate of 0.1 to 1.0 l/min and has mounting dimensions of 76 mm x 30 mm x 50 mm. The warm-up time is less than 2 minutes for start-up and less than 30 minutes for full specification.

Measuring Response: The sensor offers a digital resolution of 0.01 Vol.-% and a response time of ≤ 9.9 seconds for standard and ≤ 0.7 seconds for fast response at 0.7 l/min. It has a detection limit of ≤ 0.1 Vol.-% and repeatability of ≤ ± 0.15 Vol.-%. Linearity error is ≤ ± 0.3 Vol.-%, with long-term stability of ≤ ± 0.35 Vol.-% for zero and ≤ ± 1.65 Vol.-% for span over 1000 hours.

Environmental and Electrical Parameters: The sensor operates within a temperature range of 0 to +50 °C and can be stored between -20 to +60 °C. It functions under air pressure of 800 to 1150 hPa and ambient humidity of 0 to 95% (non-condensing). The supply voltage ranges from 3.3 V to 6.0 VDC, with a peak supply current of < 400 mA at 3.3 V and < 240 mA at 5.0 V. Average power consumption is < 800 mW.

Additional Information: The sensor's performance is influenced by temperature, pressure, and flow rate, with specific dependencies outlined. It requires a gas dew point of < +5°C and a clean, particle-free sample gas. Calibration is performed via software for zero and span adjustments. The document emphasizes the need for recalibration based on application and ambient conditions.

Catalog excerpts

FLOWEVO Infrared gas Sensor Carbon monoxide CO 30 Vol.-% smartGAS item number: F3-222307-05000 Pre calibrated Compact Design 3/5 mm gas line connector 3.3–6 V DC supply voltage Modbus ASCII or RTU Status indicated by LED Low drift Application examples Gas analysis Biogas application Environmental monitoring Process control Emission monitoring Available equipment Gas cooler Particle filter Gas pump Calibration Software Mounting equipment smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I [email protected] I www.smartgas.eu Available design in support Mechanical Installation Data communication Gas pre-treatment

Open the catalog to page 1

FLOWEVO I Carbon monoxide CO I F3-222307-05000 General features Measurement principle: Non-Dispersive Infra-Red (NDIR), dual wavelength Measurement range: by flow (nearly atmospheric pressure) Flow rate: Mounting dimensions: Warm-up time: < 2 minutes (start-up time) < 30 minutes (full specification) Measuring response* Digital resolution: Linearity error (straight line deviation): Long term stability (zero): Long term stability (span): Influence of T, P, flow rate, other* Temp. dependence (zero): Temp. dependence (span): Pressure dependence: Flow rate dependence: Cross sensitivity (zero) other...

Open the catalog to page 2

Carbon monoxide CO 30 Vol.-%

Carbon monoxide CO 30 Vol.-%

Catalog excerpts

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures