*mydirectindustry

Catalogs
smartGAS Mikrosensorik GmbH
Carbon monoxide CO 20 Vol.-%

Carbon monoxide CO 20 Vol.-%

Product catalog summary

Product Overview: The FLOWEVO Infrared Gas Sensor by smartGAS Mikrosensorik GmbH is designed for detecting carbon monoxide (CO) with a measurement range of 0 to 20 Vol.-%. It features a compact design, pre-calibration, and supports Modbus ASCII or RTU communication.

Specifications: The sensor operates on a Non-Dispersive Infra-Red (NDIR) dual wavelength principle. It requires a supply voltage of 3.3–6 V DC and has a digital resolution of 0.01 Vol.-%. The sensor's response time varies with flow rate, with a standard t90 response time of ≤ 9.9 seconds at 0.7 l/min.

Performance: The sensor exhibits low drift and high repeatability (≤ ± 0.1 Vol.-%). It maintains long-term stability with a zero drift of ≤ ± 0.3 Vol.-% over 1000 hours. Temperature and pressure dependencies are minimal, ensuring reliable performance across varying conditions.

Applications: Suitable for gas analysis, biogas applications, environmental monitoring, process control, and emission monitoring. Additional equipment such as gas coolers, particle filters, and calibration software are available to support these applications.

Installation and Operation: The sensor is designed for easy mechanical installation with dimensions of 76 mm x 30 mm x 50 mm. It requires a warm-up time of less than 2 minutes for start-up and less than 30 minutes for full specification.

Environmental Conditions: The sensor operates effectively within a temperature range of 0 to +50 °C and can be stored between -20 to +60 °C. It functions optimally at air pressures between 800 and 1150 hPa and in ambient humidity levels of 0 to 95% (non-condensing).

Recommendations: Regular recalibration is advised, especially upon initial setup and depending on application conditions. For specific applications or different measurement ranges, consultation with smartGAS sales is recommended.

Catalog excerpts

FLOWEVO Infrared gas Sensor Carbon monoxide CO 20 Vol.-% smartGAS item number: F3-222207-05000 Pre calibrated Compact Design 3/5 mm gas line connector 3.3–6 V DC supply voltage Modbus ASCII or RTU Status indicated by LED Low drift Application examples Gas analysis Biogas application Environmental monitoring Process control Emission monitoring Available equipment Gas cooler Particle filter Gas pump Calibration Software Mounting equipment smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I [email protected] I www.smartgas.eu Available design in support Mechanical Installation Data communication Gas pre-treatment

Open the catalog to page 1

FLOWEVO I Carbon monoxide CO I F3-222207-05000 General features Measurement principle: Non-Dispersive Infra-Red (NDIR), dual wavelength Measurement range: by flow (nearly atmospheric pressure) Flow rate: Mounting dimensions: Warm-up time: < 2 minutes (start-up time) < 30 minutes (full specification) Measuring response* Digital resolution: Linearity error (straight line deviation): Long term stability (zero): Long term stability (span): Influence of T, P, flow rate, other* Temp. dependence (zero): Temp. dependence (span): Pressure dependence: Flow rate dependence: Cross sensitivity (zero) other...

Open the catalog to page 2

Carbon monoxide CO 20 Vol.-%

Carbon monoxide CO 20 Vol.-%

Catalog excerpts

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures