*mydirectindustry

Catalogs
smartGAS Mikrosensorik GmbH
Carbon monoxide CO 10 Vol.-%

Carbon monoxide CO 10 Vol.-%

Product catalog summary

Product Overview: The FLOWEVO Infrared Gas Sensor for Carbon Monoxide (CO) by smartGAS Mikrosensorik GmbH is designed for applications such as gas analysis, biogas applications, environmental monitoring, process control, and emission monitoring. It features a compact design, pre-calibration, and supports Modbus ASCII or RTU communication.

Specifications: The sensor operates on a Non-Dispersive Infra-Red (NDIR) dual wavelength principle with a measurement range of 0 to 10 Vol.-% Full Scale. It requires a supply voltage of 3.3–6 V DC and has a flow rate of 0.1 to 1.0 l/min. The sensor dimensions are 76 mm x 30 mm x 50 mm.

Performance: The sensor offers a digital resolution of 0.001 Vol.-% and a response time of ≤ 9.9 seconds for standard and ≤ 0.7 seconds for fast response at 0.7 l/min. It has a detection limit of ≤ 0.05 Vol.-% and repeatability of ≤ ± 0.05 Vol.-%. Long-term stability is ≤ ± 0.3 Vol.-% for zero and ≤ ± 1.5 Vol.-% for span over 1000 hours.

Environmental and Electrical Parameters: The operating temperature range is 0 to +50 °C, with storage temperatures from -20 to +60 °C. It can operate in air pressure conditions of 800 to 1150 hPa and relative humidity of 0 to 95% (non-condensing). The sensor's power consumption is < 800 mW, with a peak supply current of < 400 mA at 3.3 V.

Installation and Calibration: The sensor requires mechanical installation and gas pre-treatment. Calibration is performed via software for zero and span adjustments. The gas dew point requirement is < +5°C, with a clean and particle-free sample gas.

Additional Information: The document emphasizes the need for recalibration depending on application and ambient conditions. It also notes that specifications are subject to change and advises consulting smartGAS for specific requirements.

Catalog excerpts

FLOWEVO Infrared gas Sensor Carbon monoxide CO 10 Vol.-% smartGAS item number: F3-222107-05000 Pre calibrated Compact Design 3/5 mm gas line connector 3.3–6 V DC supply voltage Modbus ASCII or RTU Status indicated by LED Low drift Application examples Gas analysis Biogas application Environmental monitoring Process control Emission monitoring Available equipment Gas cooler Particle filter Gas pump Calibration Software Mounting equipment smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I [email protected] I www.smartgas.eu Available design in support Mechanical Installation Data communication Gas pre-treatment

Open the catalog to page 1

FLOWEVO I Carbon monoxide CO I F3-222107-05000 General features Measurement principle: Non-Dispersive Infra-Red (NDIR), dual wavelength Measurement range: by flow (nearly atmospheric pressure) Flow rate: Mounting dimensions: Warm-up time: < 2 minutes (start-up time) < 30 minutes (full specification) Measuring response* Digital resolution: Linearity error (straight line deviation): Long term stability (zero): Long term stability (span): Influence of T, P, flow rate, other* Temp. dependence (zero): Temp. dependence (span): Pressure dependence: Flow rate dependence: Cross sensitivity (zero) other...

Open the catalog to page 2

Carbon monoxide CO 10 Vol.-%

Carbon monoxide CO 10 Vol.-%

Catalog excerpts

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures