*mydirectindustry

Catalogs
smartGAS Mikrosensorik GmbH
Carbon dioxide CO2 10.000 ppm

Carbon dioxide CO2 10.000 ppm

Product catalog summary

Product Overview: The FLOWEVO Infrared Gas Sensor by smartGAS Mikrosensorik GmbH is designed for detecting carbon dioxide (CO2) concentrations up to 10,000 ppm. It features a pre-calibrated, compact design with a 3/5 mm gas line connector and operates on a 3.3–6 V DC supply voltage. The sensor supports Modbus ASCII or RTU communication and includes an LED status indicator.

Applications: The sensor is suitable for gas analysis, process control, and environmental monitoring. Additional equipment available includes a gas cooler, particle filter, gas pump, calibration software, and mounting equipment.

Technical Specifications:

Measurement Principle: Non-Dispersive Infra-Red (NDIR), dual wavelength.
Measurement Range: 0 to 10,000 ppm Full Scale (FS).
Flow Rate: 0.1 to 1.0 l/min.
Response Time: t90 ≤ 9.9 s (standard), ≤ 0.7 s (fast).
Detection Limit: ≤ 30 ppm (standard), ≤ 38 ppm (fast).
Repeatability: ≤ ± 50 ppm.
Linearity Error: ≤ ± 100 ppm.
Long Term Stability: Zero: ≤ ± 200 ppm over 1000 hours; Span: ≤ ± 800 ppm over 1000 hours.

Environmental and Electrical Parameters:

Operating Temperature: 0 to +50 °C.
Storage Temperature: -20 to +60 °C.
Humidity: 0 to 95% relative humidity (non-condensing).
Supply Voltage: 3.3 V to 6.0 VDC.
Power Consumption: Average < 800 mW.

Additional Notes: The sensor requires a stable gas dew point of < +5°C and a clean, particle-free sample gas. Calibration is recommended at first initiation and periodically thereafter. The sensor's performance may vary based on application and environmental conditions. For further details, visit the smartGAS website or contact their sales team.

Catalog excerpts

FLOWEVO Infrared gas Sensor Carbon dioxide CO2 10.000 ppm smartGAS item number: F3-212106-05000 Pre calibrated Compact Design 3/5 mm gas line connector 3.3–6 V DC supply voltage Modbus ASCII or RTU Status indicated by LED Low drift Application examples Gas analysis Process control Environmental monitoring Available equipment Gas cooler Particle filter Gas pump Calibration Software Mounting equipment smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I [email protected] I www.smartgas.eu Available design in support Mechanical Installation Data communication Gas pre-treatment

Open the catalog to page 1

FLOWEVO I Carbon dioxide CO2 I F3-212106-05000 General features Measurement principle: Non-Dispersive Infra-Red (NDIR), dual wavelength Measurement range: by flow (nearly atmospheric pressure) Flow rate: Mounting dimensions: Warm-up time: < 2 minutes (start-up time) < 30 minutes (full specification) Measuring response* Digital resolution: Linearity error (straight line deviation): Long term stability (zero): Long term stability (span): Influence of T, P, flow rate, other* Temp. dependence (zero): Temp. dependence (span): Pressure dependence: Flow rate dependence: Cross sensitivity (zero) other...

Open the catalog to page 2

Carbon dioxide CO2 10.000 ppm

Carbon dioxide CO2 10.000 ppm

Catalog excerpts

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures