*mydirectindustry

Catalogs
smartGAS Mikrosensorik GmbH
Carbon dioxide CO2 100 ppm

Carbon dioxide CO2 100 ppm

Product catalog summary

Product Overview
The FLOWEVO Infrared Gas Sensor is designed for detecting carbon dioxide (CO2) at a concentration of 100 ppm. It features a pre-calibrated, compact design with a 3/5 mm gas line connector and operates on a 3.3–6 V DC supply voltage. The sensor supports Modbus ASCII or RTU communication and includes an LED status indicator. It is suitable for applications such as gas analysis, biogas applications, and environmental monitoring.

Specifications

Measurement Principle: Non-Dispersive Infra-Red (NDIR), dual wavelength
Measurement Range: 0 to 100 ppm Full Scale (FS)
Flow Rate: 0.1 to 1.0 l/min
Mounting Dimensions: 336 mm x 30 mm x 50 mm
Warm-up Time: Less than 2 minutes for start-up, less than 30 minutes for full specification

Measuring Response

Digital Resolution: 1 ppm
Response Time: t90 ≤ 13.2 s, ton ≤ 17.5 s at 0.7 l/min
Detection Limit: ≤ 0.6 ppm
Repeatability: ≤ ± 0.75 ppm
Linearity Error: ≤ ± 3 ppm
Long Term Stability: Zero ≤ ± 10 ppm, Span ≤ ± 15 ppm over 1000 hours

Environmental and Electrical Parameters

Operating Temperature: 0 to +50 °C
Storage Temperature: -20 to +60 °C
Air Pressure: 800 to 1150 hPa
Humidity: 0 to 95% relative humidity (non-condensing)
Supply Voltage: 3.3 V to 6.0 VDC
Power Consumption: Average < 800 mW

Additional Information
The sensor requires a stable, particle-free, and clean sample gas with a dew point of less than +5°C. Calibration is recommended at first initiation and periodically thereafter. The sensor's performance may vary based on application and environmental conditions. For further details, visit the smartGAS website or contact their sales team.

Catalog excerpts

FLOWEVO Infrared gas Sensor Carbon dioxide CO2 100 ppm smartGAS item number: F3-212104-05000 Pre calibrated Compact Design 3/5 mm gas line connector 3.3–6 V DC supply voltage Modbus ASCII or RTU Status indicated by LED Low drift Application examples Gas analysis Biogas application Environmental monitoring Picture similar Available equipment Gas cooler Particle filter Gas pump Calibration Software Mounting equipment smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I [email protected] I www.smartgas.eu Available design in support Mechanical Installation Data communication Gas pre-treatment

Open the catalog to page 1

FLOWEVO I Carbon dioxide CO2 I F3-212104-05000 General features Measurement principle: Non-Dispersive Infra-Red (NDIR), dual wavelength Measurement range: by flow (nearly atmospheric pressure) Flow rate: Mounting dimensions: Warm-up time: < 2 minutes (start-up time) < 30 minutes (full specification) Measuring response* Digital resolution: Linearity error (straight line deviation): Long term stability (zero): Long term stability (span): Influence of T, P, flow rate, other* Temp. dependence (zero): Temp. dependence (span): Pressure dependence: Flow rate dependence: Cross sensitivity (zero) other...

Open the catalog to page 2

Carbon dioxide CO2 100 ppm

Carbon dioxide CO2 100 ppm

Catalog excerpts

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures