*mydirectindustry

Catalogs
smartGAS Mikrosensorik GmbH
Carbon dioxide CO2 10 Vol.-%

Carbon dioxide CO2 10 Vol.-%

Product catalog summary

Product Overview
The FLOWEVO Infrared Gas Sensor by smartGAS Mikrosensorik GmbH is designed for measuring carbon dioxide (CO2) concentrations up to 10 Vol.-%. It features a pre-calibrated, compact design with a 3/5 mm gas line connector and operates on a 3.3–6 V DC supply voltage. The sensor supports Modbus ASCII or RTU communication and indicates status via an LED. It is characterized by low drift and is suitable for applications such as gas analysis, biogas applications, and environmental monitoring.

Specifications

Measurement Principle: Non-Dispersive Infra-Red (NDIR), dual wavelength
Measurement Range: 0 ... 10 Vol.-% Full Scale (FS)
Flow Rate: 0.1 ... 1.0 l/min
Mounting Dimensions: 76 mm x 30 mm x 50 mm
Warm-up Time: < 2 minutes (start-up), < 30 minutes (full specification)

Measuring Response

Digital Resolution: 0.001 Vol.-%
Response Time: t90 ≤ 9.9 s, ton ≤ 16.5 s at 0.7 l/min
Detection Limit: ≤ 0.05 Vol.-%
Repeatability: ≤ ± 0.06 Vol.-%
Linearity Error: ≤ ± 0.09 Vol.-%
Long Term Stability: Zero ≤ ± 0.115 Vol.-% over 1000 h, Span ≤ ± 0.72 Vol.-% over 1000 h

Environmental and Electrical Parameters

Operating Temperature: 0 … +50 °C
Storage Temperature: -20 … +60 °C
Air Pressure: 800 … 1150 hPa
Humidity: 0 … 95 % relative humidity (not condensing)
Supply Voltage: 3.3 V ... 6.0 VDC
Power Consumption: < 800 mW

Additional Information
The sensor requires a stable gas dew point of < +5°C and a clean, particle-free sample gas. Calibration is performed via software for zero and span adjustments. The sensor's performance may vary based on application, target gas, and measurement range. Recalibration is recommended at first initiation and periodically thereafter.

Catalog excerpts

FLOWEVO Infrared gas Sensor Carbon dioxide CO2 10 Vol.-% smartGAS item number: F3-212107-05000 Pre calibrated Compact Design 3/5 mm gas line connector 3.3–6 V DC supply voltage Modbus ASCII or RTU Status indicated by LED Low drift Application examples Gas analysing Biogas application Environmental monitoring Available equipment Gas cooler Particle filter Gas pump Calibration Software Mounting equipment smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I [email protected] I www.smartgas.eu Available design in support Mechanical Installation Data communication Gas pre-treatment

Open the catalog to page 1

FLOWEVO I Carbon dioxide CO2 I F3-212107-05000 General features Measurement principle: Non-Dispersive Infra-Red (NDIR), dual wavelength Measurement range: by flow (nearly atmospheric pressure) Flow rate: Mounting dimensions: Warm-up time: < 2 minutes (start-up time) < 30 minutes (full specification) Measuring response* Digital resolution: Linearity error (straight line deviation): Long term stability (zero): Long term stability (span): Influence of T, P, flow rate, other* Temp. dependence (zero): Temp. dependence (span): Pressure dependence: Flow rate dependence: Cross sensitivity (zero) other...

Open the catalog to page 2

Carbon dioxide CO2 10 Vol.-%

Carbon dioxide CO2 10 Vol.-%

Catalog excerpts

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures