*mydirectindustry

Catalogs
smartGAS Mikrosensorik GmbH
Carbon dioxide CO 10.000 ppm

Carbon dioxide CO 10.000 ppm

Product catalog summary

Product Overview
The FLOWEVO Infrared Gas Sensor by smartGAS Mikrosensorik GmbH is designed for detecting carbon dioxide (CO2) with a measurement range of 0 to 10,000 ppm. It features a compact design, pre-calibration, and supports Modbus ASCII or RTU communication. The sensor is suitable for applications such as gas analysis, biogas applications, and environmental monitoring.

Specifications

Measurement Principle: Non-Dispersive Infra-Red (NDIR), dual wavelength
Measurement Range: 0 to 10,000 ppm Full Scale
Gas Supply: By flow at nearly atmospheric pressure
Flow Rate: 0.1 to 1.0 l/min
Mounting Dimensions: 156 mm x 30 mm x 50 mm
Warm-up Time: Less than 2 minutes for start-up, less than 30 minutes for full specification

Measuring Response

Digital Resolution: 1 ppm
Response Time: t90 ≤ 11.6 s, ton ≤ 15.9 s at 0.7 l/min
Detection Limit: ≤ 20 ppm
Repeatability: ≤ ± 40 ppm
Linearity Error: ≤ ± 85 ppm
Long Term Stability: Zero ≤ ± 110 ppm, Span ≤ ± 320 ppm over 1000 hours

Environmental and Electrical Parameters

Operating Temperature: 0 to +50 °C
Storage Temperature: -20 to +60 °C
Air Pressure: 800 to 1150 hPa
Humidity: 0 to 95% relative humidity (non-condensing)
Supply Voltage: 3.3 to 6.0 VDC
Power Consumption: Average < 800 mW

Additional Information
The sensor requires a stable, particle-free, and clean sample gas with a dew point of less than +5°C. Calibration is recommended at first initiation and periodically thereafter. The product is made in Germany and all specifications are subject to change without notice.

Catalog excerpts

FLOWEVO Infrared gas Sensor Carbon dioxide CO 10.000 ppm smartGAS item number: F3-222106-05000 Pre calibrated Compact Design 3/5 mm gas line connector 3.3–6 V DC supply voltage Modbus ASCII or RTU Status indicated by LED Low drift Application examples Gas analysis Biogas application Environmental monitoring Available equipment Gas cooler Particle filter Gas pump Calibration Software Mounting equipment smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I [email protected] I www.smartgas.eu Available design in support Mechanical Installation Data communication Gas pre-treatment

Open the catalog to page 1

FLOWEVO I Carbon dioxide CO2 I F3-222106-05000 General features Measurement principle: Non-Dispersive Infra-Red (NDIR), dual wavelength Measurement range: by flow (nearly atmospheric pressure) Flow rate: Mounting dimensions: Warm-up time: < 2 minutes (start-up time) < 30 minutes (full specification) Measuring response* Digital resolution: Linearity error (straight line deviation): Long term stability (zero): Long term stability (span): Influence of T, P, flow rate, other* Temp. dependence (zero): Temp. dependence (span): Pressure dependence: Flow rate dependence: Cross sensitivity (zero) other...

Open the catalog to page 2

Carbon dioxide CO 10.000 ppm

Carbon dioxide CO 10.000 ppm

Catalog excerpts

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures