*mydirectindustry

B3-862205-03000

Product catalog summary

Product Overview: The BASICEVO Infrared Gas Sensor by smartGAS Mikrosensorik GmbH is designed for detecting Trifluoromethane R23 with a measurement range of 0 to 2000 ppm. It features a non-dispersive infrared (NDIR) dual wavelength measurement principle and is pre-calibrated with low drift.

Key Specifications:

Measurement Range: 0 to 2000 ppm Full Scale (FS)
Response Time (t90): Approximately 60 seconds
Digital Resolution: 1 ppm
Detection Limit: ≤ 7 ppm
Repeatability: ≤ ± 9 ppm
Linearity Error: ≤ ± 15 ppm
Long Term Stability: Zero ≤ ± 60 ppm, Span ≤ ± 170 ppm over 12 months

Environmental and Electrical Parameters:

Operating Temperature: -20 to +40 °C
Storage Temperature: -20 to +60 °C
Air Pressure: 800 to 1150 hPa
Humidity: 0 to 95% relative humidity (non-condensing)
Supply Voltage: 3.3 to 6.0 VDC
Power Consumption: < 800 mW

Applications: Suitable for use in hotel air conditioning, food storage rooms, industrial refrigeration, food transport, and research.

Additional Features: The sensor supports Modbus ASCII or RTU communication, has a status indication by LED, and is available with various mounting and calibration equipment.

Important Notes: The sensor's performance may vary based on application, target gas, and measurement range. Recalibration is recommended at first initiation and periodically thereafter.

Catalog excerpts

BASICEVO Infrared gas Sensor Trifluoromethane R23 2000 ppm smartGAS item number: B3-862205-03000 Pre calibrated Low drift Gas entry by diffusion 3.3 - 6 V DC supply voltage Modbus ASCII or RTU Status indication by LED Application examples Hotel air conditioning Food storage rooms Industrial Refrigeration Food Transport Research Available equipment Connect Interface Wall mount enclosure Calibration software Mounting equipment smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I [email protected] I www.smartgas.eu Available design in support Mechanical installation Data communication also, as complete Transmitter

Open the catalog to page 1

General features Measurement principle: Non Dispersive Infra-Red (NDIR), dual wavelength Measurement range: 0 … 2000 ppm Full Scale (FS) by diffusion (atmospheric pressure) Gas supply: Mounting dimensions: Warm-up time: 62 mm x 37 mm x 30 mm (L x W x H) < 2 minutes (start up time) < 11 minutes (fade in finished) < 30 minutes (full specification) Measuring response* Response time (t90): Digital resolution: Linearity error (straight line deviation): Long term stability (zero): ≤ ± 60 ppm over 12 month period Long term stability (span): ≤ ± 170 ppm over 12 month period Influence of T, P, flow rate,...

Open the catalog to page 2

B3-862205-03000

B3-862205-03000

Catalog excerpts

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures